Original Article
  • Prediction of Mechanical Behaviors of Shape Memory Ceria-zirconia Particle-reinforced Al Composites Via Microstructure-based Finite Element Modeling
  • Jung Hyuk Jang*, Yi Je Cho*†

  • * Department of Materials Science and Engineering, Sunchon National University, Suncheon 57922, Republic of Korea

  • 미세조직 기반 유한요소해석 모델을 통한 형상기억 Ceria-Zirconia 입자 강화 Al 복합재료의 기계적 거동 예측
  • 장정혁* · 조의제*†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Nagasai, B.P., Anusha, C., and Rajesh, A., “Study on mechanical properties of Al-6061/ZrO2 reinforced metal matrix composites,” Materials Today: Proceedings, Vol. 47, 2021, pp. 4552-4557.
  •  
  • 2. Du, Z., Ye, P., Zeng, X.M., Schuh, C.A., Tamura, N., Zhou, X., and Gan, C.L., “Synthesis of monodisperse CeO2–ZrO2 particles exhibiting cyclic superelasticity over hundreds of cycles,” Journal of the American Ceramic Society, Vol. 100, No. 9, 2017, pp. 4199-4208.
  •  
  • 3. Zeng, X., Du, Z., Schuh, C.A., and Gan, C.L., “Enhanced shape memory and superelasticity in small-volume ceramics: a perspective on the controlling factors,” MRS Communications, Vol. 7, No. 4, 2017, pp. 747-754.
  •  
  • 4. Lai, A., Du, Z., Gan, C.L., and Schuh, C.A., “Shape memory and superelastic ceramics at small scales,” Science, Vol. 341, No. 6153, 2013, pp. 1505-1508.
  •  
  • 5. Yu, H.Z., Hassani-Gangaraj, M., Du, Z., Gan, C.L., and Schuh, C.A., “Granular shape memory ceramic packings,” Acta Materialia, Vol. 132, 2017, pp. 455-466.
  •  
  • 6. Zheng, W., Shi, Y., Zhao, L., Jia, S., Li, L., Gan, C.L., Zhang, D., and Guo, Q., “Realizing reversible phase transformation of shape memory ceramics constrained in aluminum,” Nature Communications, Vol. 14, No. 1, 2023, Article 7103.
  •  
  • 7. Du, Z., Zeng, X.M., Liu, Q., Lai, A., Amini, S., Miserez, A., Schuh, C.A., and Gan, C.L., “Size effects and shape memory properties in ZrO2 ceramic micro-and nano-pillars,” Scripta Materialia, Vol. 101, 2015, pp. 40-43.
  •  
  • 8. Yacouti, M. and Shakiba, M., “Numerical Investigation of Shape-Memory Zirconia-Reinforced Metal-Matrix Composite for Energy Dissipation and High Temperature Applications,” Proceedings of the American Society for Composites-Thirty-Seventh Technical Conference, Tucson, Arizona, USA, Sep. 2022, pp. 1224-1241.
  •  
  • 9. Chinmulgund, M., Inturi, R.B., and Barnard, J.A., “Effect of Ar gas pressure on growth, structure, and mechanical properties of sputtered Ti, Al, TiAl, and Ti3Al films,” Thin Solid Films, Vol. 270, No. 1-2, 1995, pp. 260-263.
  •  
  • 10. Qin, S., Chen, C., Zhang, G., Wang, W., and Wang, Z., “The effect of particle shape on ductility of SiCp reinforced 6061 Al matrix composites,” Materials Science and Engineering: A, Vol. 272, No. 2, 1999, pp. 363-370.
  •  
  • 11. Gad, S.I., Attia, M.A., Hassan, M.A., and El-Shafei, A.G., “A random microstructure-based model to study the effect of the shape of reinforcement particles on the damage of elastoplastic particulate metal matrix composites,” Ceramics International, Vol. 47, No. 3, 2021, pp. 3444-3461.
  •  
  • 12. Williams, J., Segurado, J., LLorca, J., and Chawla, N., “Three dimensional (3D) microstructure-based modeling of interfacial decohesion in particle reinforced metal matrix composites,” Materials Science and Engineering: A, Vol. 557, 2012, pp. 113-118.
  •  
  • 13. Romanova, V.A., Balokhonov, R.R., and Schmauder, S., “The influence of the reinforcing particle shape and interface strength on the fracture behavior of a metal matrix composite,” Acta Materialia, Vol. 57, No. 1, 2009, pp. 97-107.
  •  
  • 14. Chen, C., Qin, S., Li, S., and Wen, J., “Finite element analysis about effects of particle morphology on mechanical response of composites,” Materials Science and Engineering: A, Vol. 278, No. 1-2, 2000, pp. 96-105.
  •  
  • 15. Yan, Y., Geng, L., and Li, A., “Experimental and numerical studies of the effect of particle size on the deformation behavior of the metal matrix composites,” Materials Science and Engineering: A, Vol. 448, No. 1-2, 2007, pp. 315-325.
  •  
  • 16. Liu, Q., Qi, F., Wang, Q., Ding, H., Chu, K., Liu, Y., and Li, C., “The influence of particles size and its distribution on the degree of stress concentration in particulate reinforced metal matrix composites,” Materials Science and Engineering: A, Vol. 731, 2018, pp. 351-359.
  •  
  • 17. Erdemir, F., Varol, T., and Çanakçı, A., “Synthesis of SiC nanoparticles by central composite design response surface methodology directed mechanical milling,” Micro & Nano Letters, Vol. 15, No. 3, 2020, pp. 187-190.
  •  
  • 18. Shu, C., Chen, S., Lei, P., Shu, X., Abdel-Wahab, A., and Essa, K., “Effect and mechanism of powder morphology on mechanical properties of nickel-based metal matrix composites TiC-IN738LC in laser powder bed fusion,” Progress in Additive Manufacturing, Vol. 10, No. 10, 2025, pp. 7835-7853.
  •  
  • 19. Schwenger, J., Romeis, S., Herre, P., Yokosawa, T., Finsel, M., Leib, E.W., Weller, H., Vossmeyer, T., Spiecker, E., and Peukert, W., “Pressure induced local phase transformation in nanocrystalline tetragonal zirconia microparticles,” Scripta Materialia, Vol. 163, 2019, pp. 86-90.
  •  
  • 20. Chawla, N. and Chawla, K., “Microstructure-based modeling of the deformation behavior of particle reinforced metal matrix composites,” Journal of Materials Science, Vol. 41, No. 3, 2006, pp. 913-925.
  •  
  • 21. Zhang, J., Ouyang, Q., Guo, Q., Li, Z., Fan, G., Su, Y., Jiang, L., Lavernia, E.J., Schoenung, J.M., and Zhang, D., “3D Microstructure-based finite element modeling of deformation and fracture of SiCp/Al composites,” Composites Science and Technology, Vol. 123, 2016, pp. 1-9.
  •  
  • 22. Yacouti, M., Erb, D.J., Yu, H.Z., Lu, K., and Shakiba, M., “Predicting the mechanical response of shape-memory zirconia-reinforced metal-matrix composites using finite element analysis and deep learning,” Composite Structures, Vol. 374, 2025, Article 119641.
  •  
  • 23. Böhm, H.J. and Han, W., “Comparisons between three-dimensional and two-dimensional multi-particle unit cell models for particle reinforced metal matrix composites,” Modelling and Simulation in Materials Science and Engineering, Vol. 9, No. 2, 2001, pp. 47-65.
  •  
  • 24. Owen, E. and Yates, E., “XLI. Precision measurements of crystal parameters,” The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science, Vol. 15, No. 98, 1933, pp. 472-488.
  •  
  • 25. Comte, C. and Von Stebut, J., “Microprobe-type measurement of Young's modulus and Poisson coefficient by means of depth sensing indentation and acoustic microscopy,” Surface and Coatings Technology, Vol. 154, No. 1, 2002, pp. 42-48.
  •  
  • 26. Pang, E.L., Olson, G.B., and Schuh, C.A., “The mechanism of thermal transformation hysteresis in ZrO2-CeO2 shape-memory ceramics,” Acta Materialia, Vol. 213, 2021, Article 116972.
  •  
  • 27. Souza, A.C., Mamiya, E.N., and Zouain, N., “Three-dimensional model for solids undergoing stress-induced phase transformations,” European Journal of Mechanics-A/Solids, Vol. 17, No. 5, 1998, pp. 789-806.
  •  
  • 28. Auricchio, F. and Petrini, L., “Improvements and algorithmical considerations on a recent three‐dimensional model describing stress‐induced solid phase transformations,” International Journal for Numerical Methods in Engineering, Vol. 55, No. 11, 2002, pp. 1255-1284.
  •  
  • 29. Catalanotti, G., “On the generation of RVE-based models of composites reinforced with long fibres or spherical particles,” Composite Structures, Vol. 138, 2016, pp. 84-95.
  •  
  • 30. Pathan, M., Tagarielli, V., Patsias, S., and Baiz-Villafranca, P., “A new algorithm to generate representative volume elements of composites with cylindrical or spherical fillers,” Composites Part B: Engineering, Vol. 110, 2017, pp. 267-278.
  •  
  • 31. Cho, Y.J., Lee, W.J., and Park, Y.H., “Effect of boundary conditions on plasticity and creep behavior analysis of particle reinforced composites by representative volume element approach,” Computational Materials Science, Vol. 100, 2015, pp. 67-75.
  •  
  • 32. Gitman, I., Askes, H., and Sluys, L.J., “Representative volume: Existence and size determination,” Engineering Fracture Mechanics, Vol. 74, No. 16, 2007, pp. 2518-2534.
  •  
  • 33. Kanit, T., Forest, S., Galliet, I., Mounoury, V., and Jeulin, D., “Determination of the size of the representative volume element for random composites: statistical and numerical approach,” International Journal of Solids and Structures, Vol. 40, No. 13-14, 2003, pp. 3647-3679.
  •  
  • 34. Cho, Y.J., Lee, W.J., and Park, Y.H., “Effect of boundary conditions on the numerical solutions of representative volume element problems for random heterogeneous composite microstructures,” Metals and Materials International, Vol. 20, No. 6, 2014, pp. 1085-1093.
  •  
  • 35. Galli, M., Cugnoni, J., and Botsis, J., “Numerical and statistical estimates of the representative volume element of elastoplastic random composites,” European Journal of Mechanics-A/Solids, Vol. 33, 2012, pp. 31-38.
  •  
  • 36. Segurado, J. and Llorca, J., “A numerical approximation to the elastic properties of sphere-reinforced composites,” Journal of the Mechanics and Physics of Solids, Vol. 50, No. 10, 2002, pp. 2107-2121.
  •  
  • 37. Hashin, Z. and Shtrikman, S., “A variational approach to the theory of the elastic behaviour of multiphase materials,” Journal of the Mechanics and Physics of Solids, Vol. 11, No. 2, 1963, pp. 127-140.
  •  
  • 38. Voigt, W., “Ueber die Beziehung zwischen den beiden Elasticitätsconstanten isotroper Körper,” Annalen der Physik, Vol. 274, No. 12, 1889, pp. 573-587.
  •  
  • 39. Reuß, A., “Berechnung der fließgrenze von mischkristallen auf grund der plastizitätsbedingung für einkristalle,” ZAMM‐Journal of Applied Mathematics and Mechanics/Zeitschrift für Angewandte Mathematik und Mechanik, Vol. 9, No. 1, 1929, pp. 49-58.
  •  
  • 40. Mori, T. and Tanaka, K., “Average stress in matrix and average elastic energy of materials with misfitting inclusions,” Acta Metallurgica, Vol. 21, No. 5, 1973, pp. 571-574.
  •  
  • 41. Affdl, J.H. and Kardos, J., “The Halpin‐Tsai equations: a review,” Polymer Engineering & Science, Vol. 16, No. 5, 1976, pp. 344-352.
  •  
  • 42. Raju, B., Hiremath, S., and Mahapatra, D.R., “A review of micromechanics based models for effective elastic properties of reinforced polymer matrix composites,” Composite Structures, Vol. 204, 2018, pp. 607-619.
  •  
  • 43. Segurado, J. and LLorca, J., “Computational micromechanics of composites: the effect of particle spatial distribution,” Mechanics of Materials, Vol. 38, No. 8-10, 2006, pp. 873-883.
  •  
  • 44. Agrawal, P., Conlon, K., Bowman, K., Sun, C., Cichocki Jr, F., and Trumble, K., “Thermal residual stresses in co-continuous composites,” Acta Materialia, Vol. 51, No. 4, 2003, pp. 1143-1156.
  •  
  • 45. Meijer, G., Ellyin, F., and Xia, Z., “Aspects of residual thermal stress/strain in particle reinforced metal matrix composites,” Composites Part B: Engineering, Vol. 31, No. 1, 2000, pp. 29-37.
  •  

This Article

Correspondence to

  • Yi Je Cho
  • Department of Materials Science and Engineering, Sunchon National University, Suncheon 57922, Republic of Korea

  • E-mail: yijecho@scnu.ac.kr