Original Article
  • Manufacture and Qualification of Composite Main Reflector of High Stable Deployable Antenna for Satellite

  • Dong-Geon Kim*, Hyun-Guk Kim*, Dong-Yeon Kim*, Kyung-Rae Koo*† , Ji-min An**, O-young Choi**

  • * Satellite System Team, Hanwha Systems
    ** R&D Center, KOLON DACC COMPOSITE

  • 위성용 전개형 고안정 반사판 안테나 주반사판 제작 및 검증

  • 김동건* · 김현국* · 김동연* · 구경래*† · 안지민** · 최오영**

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Maheshwaraa, U., Bourell, D., and Seepersad, C.C., “Design and Freeform Fabrication of Deployable Structure with Lattice Skins”, Rapid Prototyping Journal, Vol. 13, No. 4, 2007, pp. 213-225.
  •  
  • 2. Footdale, J.N., and Banik, J., “Design and Deployment Testing of the Multi-arm Radial Composite(MARCO) Reflector Antenna,” 3rd AIAA Spacecraft Structures Conference, 2016.
  •  
  • 3. Petrie, G., “Current & Future Spaceborne SAR Systems,” International Scientific & Technical Conference, Sep., 2008.
  •  
  • 4. Manfred, S., and Reiner, B., “Development Summary and Test Results of a 3 Meter Unfurlable CFRP Skin Antenna Reflector”, The 10th European Space Mechanisms and Tribology Symposium, 2003, pp. 145-151.
  •  
  • 5. Alberto, M., Di Cicco, L., Riccardo, R., and Davide, S., “Large Reflector Technologies at TAS-1,” 3rd International Conference Advanced Lightweight Structures and Reflector Antennas, 2018.
  •  
  • 6. JAXA, “Epsilon Launch Vehicle User’s Manual”, 2016.
  •  
  • 7. ILS, “Proton Launch System Mission Planner's Guide”, 2009.
  •  
  • 8. Arianespace, “Vega C User’s Manual”, 2018.
  •  
  • 9. Arianespace, “Ariane 6 User’s Manual”, 2021.
  •  
  • 10. Kim, T.H., Kim, D.Y., Suh, J.E., Han, J.H., Lee, J.E., and Jung, H.Y., “Vibration Analysis of SAR Antenna Reflectors During Satellite Maneuver”, The Korean Society for Aeronautical and Space Sciences, Vol. 48, No. 2, 2020, pp. 225-231.
  •  
  • 11. Kim, D.G., Koo, R.K., Kim, H.G., Song, S.C., Kwon, S.C., Lim, J.H., and Kim, Y.B., “Design and Analysis of Composite Reflector of High Stable Deployable Antenna for Satellite”, Composite Research, Vol. 36, No. 3, 2023, pp. 230-240.
  •  
  • 12. Yuan, C., Li, M., Zhang, Z., and Gu, Y., “Experimental Investigation on the Co-Cure Processing of Honeycomb Structure with Self-Adhesive Prepreg”, Applied Composite Materials, Vol. 15, 2008, pp. 47-59.
  •  
  • 13. Epstein, G., and Ruth, S., “Honeycomb Sandwich Structures: Vented versus Unvented Designs for Space Systems”, Aerospace Corporation, 1993.
  •  

This Article

Correspondence to

  • Kyung-Rae Koo

  • Satellite System Team, Hanwha Systems

  • E-mail: kr.koo@hanwha.com