Original Article
  • A Study on the Fatigue Strength of the 3-D Reinforced Composite Joints

  • Ji-Wan Kim*, Woo-Jin An*, Kyeong-Ho Seo*, Jin-Ho Choi*†

  • * Research Center for Aircraft Parts Technology, School of Mechanical and Aerospace Engineering, Gyeongsang National University

  • 3-차원 보강 복합재 체결부의 피로강도 특성 연구

  • 김지완* · 안우진* · 서경호* · 최진호*†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Wang, P., Geng, X., Zhao, C., and Zhang, R., “An Investigation of the Stitching Effect on Single Lap Shear Joints in Laminated Composites”, Science Engineering Composite Materials, Vol. 26, 2019, pp. 509-516.
  •  
  • 2. Andrew, F., Xiaohu, C., Xiao, H., and Li, C., “Failure Analysis of Adhesively Bonded GFRP/aluminum Matrix Single Composite Lap Joint with Cold Worked Penetrative Reinforcements”, Composites Part B: Engineering, Vol. 161, 2019, pp. 96-106.
  •  
  • 3. Fu, M., Fang, G., Liu, S., Wang, B., Zhou, Z., and Liang, J., “Failure Analysis of 2D C/SiC Composite z-pinned/bonded Hybrid Single-lap Joints”, Ceramics International, Vol. 46, No. 13, 2020, pp. 21216-21224.
  •  
  • 4. Ito, A., Hayashi, Y., and Sugimoto, S., “Experimental Investigation of Interlaminar Mechanical Properties on Carbon Fiber Stitched CFRP Laminates”, Advanced Composite Materials, Vol. 16, No. 2, 2007, pp. 95-113.
  •  
  • 5. Yoshimura, A., Nakao, T., and Takeda, N., “Improvement of Out-of-Plane Impact Damage Resistance of CFRP Due to Through-the-Thickness Stitching”, Advanced Composite Materials, Vol. 18, No. 2, 2009, pp. 121-134.
  •  
  • 6. Park, Y.B., Lee, B.H., Kweon, J.H., Choi, J.H., and Choi, I.H., “The Strength of Composite Bonded T-joints Transversely Reinforced by Carbon Pins”, Composite Structures, Vol. 94, 2012, pp. 625-634.
  •  
  • 7. Son, H.G., Park, Y.B., Kweon, J.H., and Choi, J.H., “Fatigue Behavior of Metal Pin-reinforced Composite Single-lap Joint in a Hygrothermal Environment”, Composite Structures, Vol. 108, 2014, pp. 151-160.
  •  
  • 8. Kim, C.H., Jo, D.H., and Choi, J.H., “Failure Strength of Composite T-joints Prepared Using a New 1-thread Stitching Process”, Composite Structures, Vol. 178, 2017, pp. 225-231.
  •  
  • 9. An, W.J., Kim, C.H., Choi, J.H., and Kweon, J.H., “Static Strength of RTM Composite Joint with I-fiber Stitching Process”, Composite Structures, Vol. 210, 2019, pp. 348-353.
  •  
  • 10. An, W.J., Park, G.Y., and Choi, J.H., “Process Variables of I-fiber Stitching in Mode I Failure”, Composite Structures, Vol. 240, 2020, 112082.
  •  
  • 11. Jonathan, T., Kim, C.H., and Choi, J.H., “Analysis and Experiment on DCB Specimen Using I-fiber Stitching Process”, Composite Structures, Vol. 220, 2019, pp. 521-528.
  •  
  • 12. Jonathan, T., Song, S.H., Kweon, J.H., and Choi, J.H., “Characterization of Mode II Specimen Using I-fiber Stitching Process”, Composite Structures, Vol. 255, 2021, 112863.
  •  
  • 13. Tapullima, J., Park, G.Y., Yoon, D.H., and Choi, J.H., “Unit Cell FEM Analysis Using I-fiber Single Stitch with Different Thickness”, Composite Research, Vol. 34, No. 1, 2021, pp. 30-34.
  •  
  • 14. Song, S.H., Back, J.T., An, W.J., and Choi, J.H., “Static Strength of Composite Single-lap Joints Using I-fiber Stitching Process with Different Stitching Pattern and Angle”, Composite Research, Vol. 33, No. 5, 2020, pp. 296-301.
  •  
  • 15. Choi, S.H., Song, S.H., An, W.J., and Choi, J.H., “A Study on the Strength Characteristics and Failure Detection of Single-lap Joints with I-fiber Stitching Method”, Composite Research, Vol. 34, No. 5, 2021, pp. 317-322.
  •  
  • 16. Kim, C.H., Sim, H.W., An, W.J., Kweon, J.H., and Choi, J.H., “Impact Characteristics of Composite Panel Stitched by I-fiber Process”, Composites Part A: Applied Science and Manufacturing, Vol. 127, 2019, 105644.
  •  
  • 17. Feng, Y.P., Tang, H.J., Li, C.G., Ma, X.M., and Xie, M.L., “The Fatigue Behavior of Carbon Fiber-reinforced Composite T300/Epoxy under Tension-tension and Bending Fatigue Loading”, Advanced Materials Research, Vol. 941-944, 2014, pp. 1522-1527.
  •  

This Article

Correspondence to

  • Jin-Ho Choi

  • Research Center for Aircraft Parts Technology, School of Mechanical and Aerospace Engineering, Gyeongsang National University

  • E-mail: choi@gnu.ac.kr