Special Issue
  • Numerical Investigation of the Progressive Failure Behavior of the Composite Dovetail Specimens under a Tensile Load

  • Shin-Mu Park*, Hong-Kyun Noh**, Jae Hyuk Lim**†,Yun-Hyuk Choi***

  • * Space Pioneer Program Office, Korea Aerospace Research Institute
    ** Division of Mechanical Engineering, Jeonbuk National University
    *** Engine Structure Design Team, Hanwha Aerospace R&D Center

  • 인장하중을 받는 복합재료 도브테일 요소의 점진적인 파손해석

  • 박신무*· 노홍균**· 임재혁**†· 최윤혁***

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Chougale, C.A., and Reddy, B., “Modeling of Fir-Tree Joint in Turbine Disk,” International Journal of Scientific Engineering and Technology Research, Vol. 3, No. 8, 2014, pp. 1384-1388.
  •  
  • 2. Fedulov, B.N., Antonov, F.K., Safonov, A.A., Ushakov, A.E., and Lomov, S.V., “Influence of Fibre Misalignment and Voids on Composite Laminate Strength,” Journal of Composite Materials, Vol. 49, No. 23, 2015, pp. 2887-2896.
  •  
  • 3. Al-Azzawi, A.S.M., McCrory, J., Kawashita, L.F., Featherston, C.A., Pullin, R., and Holford, K.M., “Buckling and Postbuckling Behaviour of Glare Laminates Containing Splices and Doublers. Part 1: Instrumented Tests,” Composite Strcutres, Vol. 176, 2017, pp. 1158-1169.
  •  
  • 4. Al-Azzawi, A.S.M., McCrory, J., Kawashita, L.F., Featherston, C.A., Pullin, R., and Holford, K.M., “Buckling and Postbuckling Behaviour of Glare Laminates Containing Splices and Doublers. Part 2: Numerical Modelling,” Composite Strcutres, Vol. 176, 2017, pp. 1170-1187.
  •  
  • 5. Sencu, R.M., Yang, Z., Wang, Y.C., Withers, P.J., and Soutis, C., “Multiscale Image-based Modelling of Damage and Fracture in Carbon Fibre Reinforced Polymer Composites,” Composites Science and Technology, Vol. 198, 2020, 108243.
  •  
  • 6. Woo, K.S., Lim, J.H., and Han, C.H., “Effect of Defects on Progressive Failure Behavior of Plain Weave Textile,” Composite Materials, Vol. 14, 2021, 4363.
  •  
  • 7. Jeong, G., Lim, J.H., Choi, C.H., and Kin, S.W., “A Virtual Experimental Approach to Evaluate Transverse Damage Behavior of a Unidirectional Composite Considering Noncircular Fiber Cross-sections,” Composites Structures, Vol. 228, 2019, 111369.
  •  
  • 8. Hallett, S., Lander, J., Jones, M., Kawashita, L., and Wisnom, M., “Testing and Modelling of a Severely Tapered Composite Specimen,” 5th International Conference on Composites Testing for Model Identification (Comp Test), Lausanne, Swiss, Feb. 2011.
  •  
  • 9. Gan, K.W., Allegri, G., and Hallett, S.R., “A Simplified Layered Beam Approach for Predicting Ply Drop Delamination in Thick Composite Laminates,” Materials and Design, Vol. 108, 2016, pp. 570-580.
  •  
  • 10. Zhang, B., Kawashita, L.F., Jones, M.I., Lander, J.K., and Hallett, S.R., “An Experimental and Numerical Investigation into Damage Mechanisms in Tapered Laminates under Tensile Loading,” Composites Part A: Applied Science and Manufacturing, Vol. 133, 2020, 105862.
  •  
  • 11. Hashin, Z., “Failure Criteria for Unidirectional Fiber Composites,” Journal of Applied Mechanics, Vol. 47, 1980, pp. 329-334.
  •  
  • 12. Puck, A., and Schürmann, H., “Failure Analysis of FRP Laminates by Means of Physically Based Phenomenological Models,” Composites Science and Technology, Vol. 62, Issues 12-13, 2002, pp. 1633-1662.
  •  
  • 13. HEXCEL, 2016, Hexply® 8552 Product Data Sheet, Hexel, 2016, pp. 1-6.
  •  
  • 14. Li, X., Hallett, S.R., and Wisnom, M.R., “Predicting the Effect of Through-thickness Compressive Stress on Delamination Using Interface Elements,” Composites Part A: Applied Science and Manufacturing, Vol. 39, No. 2, 2008, pp. 218-230.
  •  
  • 15. Xu, X., Wisnom, M.R., Sun, X., Rev, T., and Hallet, S.R., “Experimental Determination of Through-Thickness Compression (TTC) Enhancement Factor for Mode II Fracture Energy,” Composites Science and Technology, Vol. 165, 2018, pp. 66-73.
  •  
  • 16. Manual, Abaqus User, Abaqus User Manual, Abaqus, 2020.
  •  

This Article

Correspondence to

  • Jae Hyuk Lim

  • Division of Mechanical Engineering, Jeonbuk National University

  • E-mail: jaehyuklim@jbnu.ac.kr