Original Article
  • Evaluation of Impregnating and Mechanical Properties for Glass Fiber/Polycarbonate Composites Depending on Molecular Weight of Matrix

  • Neul-Sae-Rom Kim*,****, Yeong-Jin Jang*,****, Eun-Soo Lee**, Dong-Jun Kwon***, Seong Baek Yang****, Jungeon Lee****, Jeong Hyun Yeum****†

  • * R&D Dept, LARGE Co., Ltd.
    ** Korea Dyeing and Finishing Technology Institute
    *** Research Institute for Green Energy Convergence Technology (RIGET), Gyeongsang National University
    **** Department of Advanced Organic Materials Science and Engineering, Kyungpook National University

  • 유리섬유/폴리카보네이트 복합재료의 기지 분자량에 따른 함침 및 기계적 물성 평가

  • 김늘새롬*,****·장영진*,****·이은수**·권동준***·양성백****·이정언****·염정현****†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Vaidya, U.K., and Chawla, K.K., “Processing of Fibre Reinforced Thermoplastic Composites”, International Materials Reviews, Vol. 53, No. 4, 2008, pp. 185-218.
  •  
  • 2. Park, D.-C., Park, C.-W., Shin, D.-H., and Kim, Y.-H., “A Study on Crystallization of Thermoplastic Aromatic Polymer”, Compo-sites Research, Vol. 31, No. 2, 2018, pp. 63-68.
  •  
  • 3. Baek, Y.-M., Shin, P.-S., Kim, J.-H., Park, H.-S., Lawrence DeVries, K., and Park, J.-M., “Interfacial and Mechanical Properties of Carbon Fiber Reinforced Polycarbonate(PC) Film and PC Fiber Impregnated Composites”, Fibers and Polymers, Vol. 20, No. 11, 2019, pp. 2400-2406.
  •  
  • 4. Yao, T.-T., Liu, Y.-T., Zhu, H., Zhang, X.-F., and Wu, G.-P., “Controlling of Resin Impregnation and Interfacial Adhension in Car-bon Fiber/polycarbonate Composites by a Spray=coating of Polymer on Carbon Fibers”, Composites Science and Technology, Vol. 182, 2019, pp. 107763.
  •  
  • 5. Ryoo, H.W., Lee, D.G., and Kim, E.G., “An Effect of Fiber Length on the Correlation between Separation and Orientation of Flow Molded Fiber-Reinforced Polymeric Composites”, Composites Research, Vol. 6, No. 1, 1993, pp. 19-28.
  •  
  • 6. Kim, J.-W., and Lee, D.-G., “Effect of Fiber Orientation and Fiber Contents on the Tensile Strength in Fiber-reinforced Thermo-plastic Composites”, Composites Research, Vol. 20, No. 5, 2007, pp. 13-19.
  •  
  • 7. Kim, N.-S.-R., Lee, E.-S., and Jang, and Y.-J., “Effect of Textile Pattern on Mechanical and Impregnation Properties of Class Fi-ber/Thermoplastic Composite”, Composites Research, Vol. 31, No. 6, 2018, pp. 317-322.
  •  
  • 8. Hwang, Y.-T., Lim, J.-Y., Nam, B.-G., and Kim, H.-S. “Analytical Prediction and Validation of Elastic Behavior of Car-bon-Fiber-Reinforced Woven Composites”, Composites Research, Vol. 31, No. 5, 2018, pp. 276-281.
  •  
  • 9. Haj-Ali, R., Kilic, H., and Zureick, A.-H., “Three-Dimensional Micromechanics-Based Constitutive Framework for Analysis of Pul-truded Composite Structures”, Journal of Engineering Mechanics, Vol. 127, No. 7, 2001, pp. 653-660.
  •  
  • 10. Gardiner, G., “Aerospace-grade Compression Molding: Continuous Compression Molding Process Produces Structures 30 Percent Lighter than Aluminum at Costs that have Both Airbus and Boeing Sold”, High Performance Composites, Vol. 18, No. 4, 2010, pp. 34-40.
  •  
  • 11. Song, S.A., On, S.Y., Park, G.E., and Kim, S.S., “Improvement of Physical Properties for Carbon Fiber/PA 6,6 Composites”, Com-posites Research, Vol. 30, No. 6, 2017, pp. 365-370.
  •  
  • 12. Kwon, D.J., Shin, P.S., Kim, J.H., DeVries, K.L., and Park, J.M., “Interfacial and Wetting Properties of Carbon Fiber Reinforced Epoxy Composites with Different Hardeners by Electrical Resistance Measurement”, Polymer Testing, Vol. 53, 2016, pp. 293-298.
  •  
  • 13. Lee, W., Um, M.-K., Byun, J.-H., and Cao, J., “Characterization of In-plane Shear Behaviors of Woven Fabrics by Bias-extension and Trellis-frame Tests”, Composites Research, Vol. 23, No. 5, 2010, pp. 8-14.
  •  
  • 14. Jang, Y.J., and Jang, J.H., “The Improvement of Thermal Stability and Tensile Toughness by the Photocrosslinking of Poly (phe-nylene sulfide) Containing Acetophenone”, Textile Coloration and Finishing, Vol. 24, No. 4, 2012, pp. 281-287.
  •  

This Article

Correspondence to

  • Jeong Hyun Yeum

  • Department of Advanced Organic Materials Science and Engineering, Kyungpook National University

  • E-mail: jhyeum@knu.ac.kr