Original Article
  • Application of Laser Surface Treatment Technique for Adhesive Bonding of Carbon Fiber Reinforced Composites

  • Mun-Young Hwang*, Lae-Hyong Kang**, Mongyoung Huh***†

  • * Department of Mechatronics Engineering, and LANL-JBNU Engineering Institute-Korea, Jeonbuk National University, Jeonju 54896, Korea
    ** Department of Mechatronics Engineering, Department of Flexible and Printable Electronics, and LANL-JBNU Engineering Institute-Korea, Jeonbuk National University, Jeonju 54896, Korea
    *** Korea Institute of Carbon Convergence Technology, Jeonju 54853, Korea

  • 탄소복합재 접착공정을 위한 CFRP의 레이저 표면처리 기법의 적용

  • 황문영* · 강래형** · 허몽영***†

References
  • 1. Löbel, T., Holzhüter, D., Sinapius, M., and Hühne, C., “A Hybrid Bondline Concept for Bonded Composite Joints,” International Journal of Adhesion and Adhesives, Vol. 68, 2016, pp. 229-238.
  •  
  • 2. Guo, X., Guan, Z.D., Nie, H.C., Tan, R.M., and Li, Z.S., “Damage Tolerance Analysis of Adhesively Bonded Composite Single Lap Joints Containing a Debond Flaw,” The Journal of Adhesion, Vol. 93, No. 3, 2017, pp. 216-234.
  •  
  • 3. Liu, S., Cheng, X., Zhang, Q., Zhang, J., Bao, J., and Guo, X., “An Investigation of Hygrothermal Effects on Adhesive Materials and Double Lap Shear Joints of CFRP Composite Laminates,” Composites Part B: Engineering, Vol. 91, 2016, pp. 431-440.
  •  
  • 4. Luo, H., Yan, Y., Zhang, T., and Liang, Z., “Progressive Failure And Experimental Study of Adhesively Bonded Composite Sin-gle-lap Joints Subjected to Axial Tensile Loads,” Journal of Adhesion Science and Technology, Vol. 30, No. 8, 2016, pp. 894-914.
  •  
  • 5. Ungureanu, D., Taranu, N., Lupasteanu, V., Rosu, A.R., and Mihai, P., “The Adhesion Theories Applied to Adhesively Bonded Joints of Fiber Reinforced Polymer Composite Elements,” Buletinul Institutului Politehnic din lasi. Sectia Constructii, Arhitectura, Vol. 62, No. 2, 2016, pp. 37.
  •  
  • 6. Wegman, R.F., and Van Twisk, J., Surface Preparation Techniques for Adhesive Bonding, W. Andrew, Ed., Elsevier, USA, 2012.
  •  
  • 7. Adams, R.D., Adhesive Bonding: Science, Technology and Applications, Woodhead Publishing Limited, England, 2005.
  •  
  • 8. Kwon, D.J., Park, S.M., Park, J.M., and Kwon, I.J., “A Study on Bonding Process for Improvement of Adhesion Properties Between CFRP-Metal Dual Materials,” Composites Research, Vol. 30, No. 6, 2017, pp. 416-421.
  •  
  • 9. Deng, S., Djukic, L., Paton, R., and Ye, L., “Thermoplastic–epoxy Interactions and Their Potential Applications in Joining Compo-site Structures–A Review,” Composites Part A: Applied Science and Manufacturing, Vol. 68, 2015, pp. 121-132.
  •  
  • 10. Gude, M.R., Prolongo, S.G., and Ureña, A., “Adhesive Bonding of Carbon Fibre/epoxy Laminates: Correlation between Surface and Mechanical Properties,” Surface and Coatings Technology, Vol. 207, 2012, pp. 602-607.
  •  
  • 11. Bénard, Q., Fois, M., and Grisel, M., “Influence of Fibre Reinforcement and Peel Ply Surface Treatment Towards Adhesion of Com-posite Surfaces,” International Journal of Adhesion and Adhesives, Vol. 25, No. 5, 2005, pp. 404-409.
  •  
  • 12. Cho, T.M., Choo, Y.S., Lee, M.J., Oh, H.C., Lee, B.C., Park, T.H., and Shin, Y.S., “Effect of Surface Roughness on the Adhesive Strength of the Heat-resistant Adhesive RTV88,” Journal of Adhesion Science and Technology, Vol. 23, No. 15, 2009, pp. 1875-1882.
  •  
  • 13. Encinas, N., Oakley, B.R., Belcher, M.A., Blohowiak, K.Y., Dillingham, R.G., Abenojar, J., and Martínez, M.A., “Surface Modifica-tion of Aircraft Used Composites for Adhesive Bonding,” International Journal of Adhesion and Adhesives, Vol. 50, 2014, pp. 157-163.
  •  
  • 14. Wu, G.M., Shyng, Y.T., Kung, S.F., and Wu, C.F., “Oxygen Plasma Processing and Improved Interfacial Adhesion in PBO Fiber Reinforced Epoxy Composites,” Vacuum, Vol. 83, 2009, pp. S271-S274.
  •  
  • 15. Leone, C., and Genna, S., “Effects of Surface Laser Treatment on Direct Co-bonding Strength of CFRP Laminates,” Composite Structures, Vol. 194, 2018, pp. 240-251.
  •  
  • 16. Oliveira, V., Sharma, S.P., De Moura, M.F.S.F., Moreira, R.D.F., and Vilar, R., “Surface Treatment of CFRP Composites Using Femtosecond Laser Radiation,” Optics and Lasers in Engineering, Vol. 94, 2017, pp. 37-43.
  •  
  • 17. Fischer, F., Kreling, S., and Dilger, K., “Surface Structuring of CFRP by Using Modern Excimer Laser Sources,” Physics Procedia, Vol. 39, 2012, pp. 154-160.
  •  
  • 18. Yokozeki, T., Ishibashi, M., Kobayashi, Y., Shamoto, H., and Iwahori, Y., “Evaluation of Adhesively Bonded Joint Strength of CFRP with Laser Treatment,” Advanced Composite Materials, Vol. 25, No. 4, 2016, pp. 317-327.
  •  
  • 19. Wang, H.Q., Sun, J.S., Li, C.N., Geng, S.N., Sun, H.G., and Wang, G.L., “Microstructure and Mechanical Properties of Molyb-denum–iron–boron–chromium Cladding Using Argon arc Welding,” Materials Science and Technology, Vol. 32, No. 16, 2016, pp. 1694-1701.
  •  
  • 20. Tao, R., Alfano, M., and Lubineau, G., “Laser-based Surface Patterning of Composite Plates for Improved Secondary Adhesive Bonding,” Composites Part A: Applied Science and Manufacturing, Vol. 109, 2018, pp. 84-94.
  •  
  • 21. Davis, G.D., “Surface Treatment of Aluminum and Titanium: From Basic Research to Production Failure Analysis,” Surface and Interface Analysis, Vol. 17, No. 7, 1991, pp. 439-447.
  •  

This Article

Correspondence to

  • Mongyoung Huh

  • Korea Institute of Carbon Convergence Technology, Jeonju 54853, Korea

  • E-mail: herpoly@kctech.re.kr