Original Article
  • Evaluation of Mechanical Properties of Unidirectional CFRP and GFRP Laminates with 0° and 90° Orientations
  • Jaeki Kwon*, Dongwoo Shin**, Jaegwan Kim***, Jungkyu Shin****, Taejun Sohn****, Jungil Jeon****†

  • * Youngwire, 50, Gwanchanggongdan-gil, Jugyo-myeon, Boryeong-si, Chungcheongnam-do, 33448, Republic of Korea
    ** StarWorks, 10, Nammaegongwon-ro 2-gil, Gyeongsan-si, Gyeongsangbuk-do, 38615, Republic of Korea Korea
    *** Textile Center, 227, Palgong-ro, Dong-gu, Daegu 41028, Republic of Korea
    **** YH Auto, 95, Gwanchanggongdan-gil, Jugyo-myeon, Boryeong-si, Chungcheongnam-do, 33448, Republic of Korea

  • 0° 및 90° 단방향 CFRP 및 GFRP 적층판의 기계적 특성 평가
  • 권재기* · 신동우** · 김재관*** · 신정규**** · 손태준**** · 전정일****†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Kwon, J. K., Jeon, J. I, and Shin, J. K., “Compression Behavior and Damage Evaluation for Automotive Suspension Fiber-Reinforced Composite Coil Springs,” Compos. Res., Vol. 35, No. 6, 2022, pp. 439-446.
  •  
  • 2. Seo, D. K., Ha, N. R., Lee, J. H., Park, H. G., and Bae, J. S., “Property Evaluation of Epoxy Resin based Aramid and Carbon Fiber Composite Materials,” Text. Color. Finish., Vol. 27, No. 1, 2015, pp. 11-17.
  •  
  • 3. Lee, J. R., and Park, S. J., “Development Trend of Matrix Resins in Polymer Composites,” Polym. Sci. Technol., Vol. 10, No. 1, 1999, pp. 35-46.
  •  
  • 4. Azzawi, W. A., Kadhim, H., and Jomah, A. J. S., “Mechanical Properties Characterization of Glass/Carbon Fiber Hybrid Multilayer Composite under Environmental Aging Condition,” Diyala J. Eng. Sci., Vol. 17, No. 1, 2024, pp. 94-102.
  •  
  • 5. Rajak, D. K., Wagh, P. H., and Linul, E., “Manufacturing Technologies of Carbon/Glass Fiber-Reinforced Polymer Composites and Their Properties: A Review,” Polymers, Vol. 13, No. 21, 2021, 3721.
  •  
  • 6. Park, S. H., Kim, S. J., Shin, E. S., Lee, S. J., Kang, B. M., Park, K. H., Hong, S. H., and Hwang, S. H., “Surface Modified Glass-Fiber Effect on the Mechanical Properties of Glass-Fiber Reinforced Polypropylene Composites,” Elast. Compos., Vol. 54, No. 3, 2019, pp. 182-187.
  •  
  • 7. Mohamed, Y. S., and Abdelbary, A., “Theoretical and Experimental Study on the Influence of Fiber Orientation on the Tensile Properties of Unidirectional Carbon Fiber/Epoxy Composite,” Alexandria Eng. J., Vol. 67, 2023, pp. 693-705.
  •  
  • 8. Awla, N. J., and Khdir, Y. K., “Experimental Study of Mechanical Properties of Unidirectional Woven Carbon Fiber and Fiber Glass - Epoxy Composites,” Al-Nahrain J. Eng. Sci., Vol. 26, No. 1, 2023, pp. 7-13.
  •  
  • 9. Almeida Jr., J. H. S., Angrizani, C. C., Botelho, E. C., and Amico, S. C., "Effect of Fiber Orientation on the Shear Behavior of Glass Fiber/Epoxy Composites," Mater. Des., Vol. 65, 2015, pp. 789-795.
  •  
  • 10. ASTM D3039: Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials, 2017, Vol. 15.03, pp. 1-13.
  •  
  • 11. ASTM D3410: Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading, 2016, Vol. 15.03, pp. 1-11.
  •  
  • 12. ASTM D5379: Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method, 2019, Vol. 15.03, pp. 1-13.
  •  
  • 13. ASTM D3171: Standard Test Methods for Constituent Content of Composite Materials, 2015, Vol. 15.03.
  •  
  • 14. Toray Composite Materials America, Inc., "TORAYCA® T700S Data Sheet," https://www.toraycma.com/wp-content/uploads/T700S-Data-Sheet.pdf (accessed Oct. 24, 2026).
  •  
  • 15. Um, C. H., Lee. M. H., Kwak, S. B., Han, I. S., Ko, Y. K., Lee, H. W., Lee, P. C., and Ha, J. U., “Study on the Interfacial Strength of Carbon Fiber-Polymer Film Composite by Lap Shear Test Method,” Trans. KSAE, Vol. 27, No. 6, 2019, pp. 455-461.
  •  
  • 16. Kang, T. Y., An, H. S., Chun, H. J., and Park, J. C., “Fatigue Behavior of Composites with different Fiber Orientation,” Compos. Res., Vol. 34, No. 2, 2021, pp. 77-81.
  •  
  • 17. Kwon, J. K., and Shin, J. K., “Evaluation of the Durability Characteristics of the Active Turns of GFRP Composite Coil Spring by Structural Analysis and Tests,” Trans. Korean Soc. Mech. Eng. A, Vol. 47, No. 9, 2023, pp. 721-728.
  •  
  • 18. Yang, K., Yue, Y. M., Zhao, W. P., Liang, Y., Mei, L., and Xue, J. J., “Influence of Resin Content on Mechanical Properties of Composite Laminates,” IOP Conf. Ser.: Mater. Sci. Eng., Vol. 770, 2020, 012009.
  •  
  • 19. Venkatesan, G., Ripepi, M. J., and Bakis, C. E., “Transverse Young's modulus of carbon/glass hybrid fiber composites,” J. Compos. Mater., Vol. 54, No. 7, 2019, pp. 947-960.
  •  
  • 20. Cho, H. K., “Optimization of Hybrid Cylindrical Laminated Composites Under Thermal Effects,” J. Korean Soc. Manuf. Technol. Eng., Vol. 31, No. 4, 2022, pp. 255-262.
  •  
  • 21. Callister, W. D., and Rethwisch, D. G., Materials Science and Engineering, 10th Edition, Wiley, 2018, pp. 148, 149, 154, 515.
  •  
  • 22. Phoenix, S. L., and Beyerlein, I. J., “Statistical Strength Theory for Fibrous Composite Materials,” In book: Compr. Compos. Mater., Vol. 1, Chapter 19, 2000, pp. 559-639.
  •  
  • 23. Bolotin, V. V., “Brush-like Modes of Fatigue Fracture in Unidirectional Fibre Composites,” Int. J. Non-Linear Mech., Vol. 31, No. 6, 1996, pp. 823-836.
  •  
  • 24. Schapery, R. A., “Compressive Strength and Failure Time Based on Local Buckling in Viscoelastic Composites,” Appl. Mech. Rev., Vol. 46, No. 11S, 1993, pp. S221-S228.
  •  
  • 25. Norris, R. E., Ennis, B. L., Clarke, R. J., Miller, D. A., Samborsky, D. D., Xiong, F., and Camarena, E., “Initial Assessment of Alternative Carbon Fiber Geometries for Design of Cost-effective Compressive Performance: Size Effect Studies,” Composites Part B: Engineering, Vol. 296, 2025, 112181.
  •  
  • 26. Grandidier, J.-C., Casari, P., and Jochum, C., “A Fibre Direction Compressive Failure Criterion for Long Fibre Laminates at Ply Scale, Including Stacking Sequence and Laminate Thickness Effects,” Composite Structures, Vol. 94, No. 12, 2012, pp. 3799-3806.
  •  
  • 27. Budiansky, B., and Fleck, N. A., “Compressive Failure of Fibre Composites,” J. Mech. Phys. Solids, Vol. 41, No. 1, 1993, pp. 183-211.
  •  
  • 28. Christensen, R. M., and DeTeresa, S. J., “The Kink Band Mechanism for the Compressive Failure of Fiber Composite Materials,” J. Appl. Mech., Vol. 64, No. 1, 1997, pp. 1-6.
  •  
  • 29. Wang, H., Zhong, X. Y., Jia, H., Zhang, L. W., Liu, H. S., Sun, M. C., Liu, T. W., Bao, J. W., Bai, J. B., and Ge, S. C., “Study on the Transverse Properties of T800-Grade Unidirectional Carbon Fiber-Reinforced Polymers,” Materials, Vol. 18, No. 4, 2025, 816.
  •  
  • 30. Kim, J. W., “Effects of Fiber Orientation and Contents on the Tensile Strength and High Velocity Impact Absorbed Energy of GFRP Composites,” Ph.D. Thesis, Department of Precision Mechanical Engineering, Chosun University, Gwangju, Korea, 2008.
  •  
  • 31. Blümel, T., Sahr, R. K., Krimmer, A., and Bardenhagen, A., “Investigation and Calculation of the Longitudinal Compressive Strength of Unidirectional Glass Fiber Reinforced Polymer Considering the Fiber Orientation Distribution,” Compos. Part C Open Access, Vol. 14, 2024, 100480.
  •  
  • 32. Liu, L., Zhang, X., Wang, Z., Wang, Y., and Guo, J., “Micromechanics Modeling of Transverse Tensile Strength for Unidirectional CFRP Composite,” Materials, Vol. 15, No. 23, 2022, 8577.
  •  
  • 33. ASTM D2734: Standard Test Methods for Void Content of Reinforced Plastics, 2016.
  •  

This Article

Correspondence to

  • Jungil Jeon
  • YH Auto, 95, Gwanchanggongdan-gil, Jugyo-myeon, Boryeong-si, Chungcheongnam-do, 33448, Republic of Korea

  • E-mail: jijeon@yh-auto.co.kr