Original Article
  • Thermo-mechanical Finite Element Analysis of Process-induced Deformation during Press Forming of Thermoplastic Composites
  • Joongwon Lee*, Woo-Ju Lee*, Byeong-Su Kwak*, Sung-Ha Ji*, **, Hyun-Woo Ju**, Hyoung Jun Lim*†

  • * School of Mechanical and Aerospace Engineering, Gyeongsang National University, Jinju
    ** Korea Aerospace Industries, Ltd.

  • 프레스 포밍 공정 기반 열가소성 복합재 제작 시 발생하는 공정유도변형의 열-기계적 유한요소 해석
  • 이중원* · 이우주* · 곽병수* · 지성하*, ** · 주현우** · 임형준*†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Bai, Q., Hao, Q., Dai, H., Chen, Y., and Dai, N., “A Review on Integrated Design and Manufacturing Technologies for Continuous Fiber-reinforced Polymer Composite Lightweight Structures in Aerospace,” Thin-Walled Structures, Vol. 217, 2025, pp. 113750.
  •  
  • 2. Zhang, J., Lin, G., Vaidya, U., and Wang, H., “Past, Present and Future Prospective of Global Carbon Fibre Composite Developments and Applications,” Composites Part B: Engineering, Vol. 250, 2023, pp. 110463.
  •  
  • 3. Xu, X., Peng, G., Zhang, B., Shi, F., Gao, L., and Gao, J., “Material Performance, Manufacturing Methods, and Engineering Applications in Aviation of Carbon Fiber Reinforced Polymers: A Comprehensive Review,” Thin-Walled Structures, Vol. 209, 2025, pp. 112899.
  •  
  • 4. Liu, J., Quan, D., Scarselli, G., Alderliesten, R., Wang, H., and Zhao, G., “Developments and Future Prospects of Welding Technology for Carbon Fiber Thermoplastic Composites,” Composites Part B: Engineering, Vol. 297, 2025, pp. 112314.
  •  
  • 5. Xing, M., Fu, S., Shembekar, A.P., and Ray, D., “Recycling of Carbon Fibre/PEKK Laminates via Glass Transition Assisted Mechanical Delamination,” Composites Part B: Engineering, Vol. 310, 2026, pp. 113155.
  •  
  • 6. Özbek, Y., Al-Nadhari, A., Eskizeybek, V., Yıldız, M., and Şaş, H.S., “Influence of Strand Size and Morphology on the Mechanical Performance of Recycled CF/PEKK Composites: Harnessing Waste for Aerospace Secondary Load-bearing Applications,” Composites Part B: Engineering, Vol. 296, 2025, pp. 112232.
  •  
  • 7. Brooks, R.A., Wang, H., Ding, Z., Xu, J., Song, Q., Liu, H., Dear, J.P., and Li, N., “A Review on Stamp Forming of Continuous Fibre-reinforced Thermoplastics,” International Journal of Lightweight Materials and Manufacture, Vol. 5, No. 3, 2022, pp. 411-430.
  •  
  • 8. Wang, H.H., Huo, S., Chevali, V., Hall, W., Offringa, A., Song, P., and Wang, H., “Carbon Fiber Reinforced Thermoplastics: From Materials to Manufacturing and Applications,” Advanced Materials, Vol. 37, No. 27, 2025, pp. 2418709.
  •  
  • 9. Kim, S., Kim, D.H., Kim, S.W., and Lee, S.Y., “Trends in Predicting Thermoforming-induced Deformation of Thermoplastic Composites: A Review,” Composites Research, Vol. 37, No. 4, 2024, pp. 275-285.
  •  
  • 10. Kim, S., Kim, D.H., Kim, S.W., and Lee, S.Y., “Prediction of Process-induced Deformation in CFRTP Thermoforming Using Finite Element Analysis and Parametric Study of Key Process Parameters,” Composites Research, Vol. 38, No. 4, 2025, pp. 468-478.
  •  
  • 11. Carosella, S., Hügle, S., Helber, F., and Middendorf, P., “A Short Review on Recent Advances in Automated Fiber Placement and Filament Winding Technologies,” Composites Part B: Engineering, Vol. 287, 2024, pp. 111843.
  •  
  • 12. Ekuase, O.A., Anjum, N., Eze, V.O., and Okoli, O.I., “A Review on the Out-of-autoclave Process for Composite Manufacturing,” Journal of Composites Science, Vol. 6, No. 6, 2022, pp. 172.
  •  
  • 13. Velisaris, C.N., and Seferis, J.C., “Crystallization Kinetics of Polyetheretherketone (PEEK) Matrices,” Polymer Engineering & Science, Vol. 26, No. 22, 1986, pp. 1574-1581.
  •  
  • 14. Ste-Marie, S., Thermostamping of Long-fiber Thermoplastic Composites: Consideration of Wrinkles, Distortions, and Cost, M.A.Sc. Thesis, Concordia University, Canada, 2018.
  •  
  • 15. Barocio, E., Hicks, J., Kim, G., Favaloro, A., Ghosh, G., Goodsell, J., and Pipes, R.B., “Validation of Shape Change Predictions for Stamp Forming of Carbon Fiber Thermoplastic Composite Laminates,” Composites Part B: Engineering, Vol. 275, 2024, pp. 111325.
  •  
  • 16. Brauner, C., Peters, C., Brandwein, F., and Herrmann, A.S., “Analysis of Process-induced Deformations in Thermoplastic Composite Materials,” Journal of Composite Materials, Vol. 48, No. 22, 2014, pp. 2779-2791.
  •  
  • 17. Bogetti, T.A., and Gillespie Jr., J.W., “Process-induced Stress and Deformation in Thick-section Thermoset Composite Laminates,” Journal of Composite Materials, Vol. 26, No. 5, 1992, pp. 626-660.
  •  
  • 18. Svanberg, J.M., Predictions of Manufacturing Induced Shape Distortions: High Performance Thermoset Composites, Ph.D Thesis, Luleå University of Technology, Sweden, 2002.
  •  
  • 19. Kim, D.H., Kim, S.W., and Lee, I., “Evaluation of Curing Process-induced Deformation in Plain Woven Composite Structures Based on Cure Kinetics Considering Various Fabric Parameters,” Composite Structures, Vol. 287, 2022, pp. 115379.
  •  
  • 20. Toray Advanced Composites, Toray Cetex® TC1100 PPS Product Data Sheet, Toray Advanced Composites, Nijverdal, Netherlands, 2024.
  •  
  • 21. Saleem, A.T., Petrović, V., Grbović, A., Lozanović-Šajić, J., and Balać, I., “Numerical Evaluation of the Elastic Properties of Carbon Fiber Reinforced Composite Material at Elevated and Lowered Temperatures,” Science of Sintering, Vol. 53, No. 1, 2021, pp. 127-136.
  •  
  • 22. Kwok, K., and Pellegrino, S., “Micromechanics Models for Viscoelastic Plain-weave Composite Tape Springs,” AIAA Journal, Vol. 55, No. 1, 2017, pp. 309-321.
  •  
  • 23. Daggumati, S., De Baere, I., Van Paepegem, W., Degrieck, J., Xu, J., Lomov, S.V., and Verpoest, I., “Meso-scale Modeling in Thermoplastic 5-harness Satin Weave Composite,” Proceeding of the 17th International Conference on Composite Materials (ICCM-17), Edinburgh, UK, July 2009.
  •  

This Article

Correspondence to

  • Hyoung Jun Lim
  • School of Mechanical and Aerospace Engineering, Gyeongsang National University, Jinju

  • E-mail: hj.lim@gnu.ac.kr