Original Article
  • Evaluation of Tensile Modulus and Failure Characteristics of GFRP Bars Hybridized with Surface Carbon Fibers
  • Sang-Youl Lee*†

  • * School of Civil, Environmental and Architectural Engineering, Gyeongkuk National University

  • 표면 탄소섬유 복합화에 따른 하이브리드 GFRP 보강근의 인장 탄성계수 및 파괴특성 평가
  • 이상열*†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Seo, D.-W., Park, K.-T., You, Y.-J., and Kim, H.-Y., “Enhancement in Elastic Modulus of GFRP Bars by Material Hybridization,” Engineering, Vol. 5, No. 11, 2013, pp. 865-869. https://doi.org/10.4236/eng.2013.511105
  •  
  • 2. Lee, S.-Y., “Natural Frequency Characteristics of GFRP Pole Structures for Civil Structures with Different Fiber-Volume Fraction,” Composites Research, Vol. 27, No. 2, 2014, pp. 66-71. https://doi.org/10.7234/composres.2014.27.2.066
  •  
  • 3. Xu, G., Yu, Y., Pan, Y., and Li, B., “Durability of Bond between Carbon/Glass Hybrid Fiber-Reinforced Polymer (HFRP) Bar and Concrete in Water,” Advances in Structural Engineering, Vol. 26, No. 9, 2023, pp. 1752-1764. https://doi.org/10.1177/13694332231175391
  •  
  • 4. Lee, S.-Y., “Fatigue Behaviors of High-Speed Track Slabs Reinforced by GFRP Composite Rebar: Full-Scale Experimental Verification,” Journal of Composites Science, Vol. 9, No. 11, 2025, 597. https://doi.org/10.3390/jcs9110597
  •  
  • 5. Jin, Z., Xu, M., Pang, B., Cao, Y., and Wang, H., “Role of fiber distribution on tensile properties of hybrid fiber-reinforced polymer (HFRP) bars through experimental and numerical simulation study,” Journal of Building Engineering, Vol. 117, 2026, 114750. https://doi.org/10.1016/j.jobe.2025.114750
  •  
  • 6. ASTM International, Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars, ASTM D7205/D7205M-21, West Conshohocken, PA, 2021. https://doi.org/10.1520/D7205_D7205M-21
  •  
  • 7. ACI Committee 440, Building Code Requirements for Structural Concrete Reinforced with Glass Fiber-Reinforced Polymer (GFRP) Bars—Code and Commentary, ACI CODE-440.11-22, American Concrete Institute, Farmington Hills, MI, 2023.
  •  
  • 8. ASTM International, Standard Specification for Solid Round Glass Fiber Reinforced Polymer Bars for Concrete Reinforcement, ASTM D7957/D7957M-25, West Conshohocken, PA, 2025.
  •  

This Article

Correspondence to

  • Sang-Youl Lee
  • School of Civil, Environmental and Architectural Engineering, Gyeongkuk National University

  • E-mail: lsy@gknu.ac.kr