Original Article
  • Melt-Spinnable PAN-Based Carbon Fiber Precursors: Technology Trends and Composite Applications
  • Seonghwan Lee*, Seo Gyun Kim*, Duck Joo Yang**†, Bon-Cheol Ku*, ***, ****†

  • * Institute of Advanced Composite Materials, Korea Institute of Science and Technology (KIST), Jeonbuk 55324, Republic of Korea
    ** Department of Chemistry & Biochemistry, The University of Texas at Dallas, Richardson, Texas 75080, USA
    *** Department of JBNU-KIST Industry-Academia Convergence Research, Graduate School, Jeonbuk National University, 54896, Republic of Korea
    **** Department of Mechanical Engineering, The University of Texas at Dallas, Richardson, Texas 75080, USA

  • 용융방사 가능한 폴리아크릴로니트릴(PAN) 기반 탄소섬유 전구체 기술 동향 및 복합소재 응용
  • 이성환* · 김서균* · 양덕주**† · 구본철*, ***, ****†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Choi, D., Kil, H.-S., and Lee, S., “Fabrication of low-cost carbon fibers using economical precursors and advanced processing technologies,” Carbon, Vol. 142, 2019, pp. 610-649.
  •  
  • 2. Kaur, J., Millington, K.R., and Smith, S., “Producing high-quality precursor polymer and fibers to achieve theoretical strength in carbon fibers: A review,” Journal of Applied Polymer Science, Vol. 133, No. 38, 2016, 43963.
  •  
  • 3. Khayyam, H., Jazar, R.N., Nunna, S., Golkarnarenji, G., Badii, K., Fakhrhoseini, S.M., Kumar, S., and Naebe, M., “PAN precursor fabrication, applications and thermal stabilization process in carbon fiber production: Experimental and mathematical modelling,” Progress in Materials Science, Vol. 107, 2020, 100575.
  •  
  • 4. Brown, K.R., Harrell, T.M., Skrzypczak, L., Scherschel, A., Wu, H.F., and Li, X., “Carbon fibers derived from commodity polymers: A review,” Carbon, Vol. 196, 2022, pp. 422-439.
  •  
  • 5. Chernikova, E.V., Osipova, N.I., Plutalova, A.V., Toms, R.V., Gervald, A.Y., Prokopov, N.I., and Kulichikhin, V.G., “Melt-Spinnable Polyacrylonitrile—An Alternative Carbon Fiber Precursor,” Polymers, Vol. 14, No. 23, 2022, 5222.
  •  
  • 6. Frank, E., Steudle, L.M., Ingildeev, D., Spörl, J.M., and Buchmeiser, M.R., “Carbon Fibers: Precursor Systems, Processing, Structure, and Properties,” Angewandte Chemie International Edition, Vol. 53, No. 21, 2014, pp. 5262-5298.
  •  
  • 7. Park, O.K., Lee, S., Joh, H.-I., Kim, J.K., Kang, P.H., Lee, J.H., and Ku, B.-C., “Effect of functional groups of carbon nanotubes on the cyclization mechanism of polyacrylonitrile (PAN),” Polymer, Vol. 53, No. 11, 2012, pp. 2168-2174.
  •  
  • 8. Rangarajan, P., Yang, J., Bhanu, V.A., Godshall, D., McGrath, J.E., Wilkes, G.L., and Baird, D.G., “Effect of comonomers on melt processability of polyacrylonitrile,” Journal of Applied Polymer Science, Vol. 85, No. 1, 2002, pp. 69-83.
  •  
  • 9. Bhanu, V.A., Rangarajan, P., Wiles, K.B., Bortner, M.J., Sankarpandian, M., Godshall, D., Glass, T.E., Banthia, A.K., Yang, J., Wilkes, G.L., Baird, D.G., and McGrath, J.E., “Synthesis and characterization of acrylonitrile methyl acrylate statistical copolymers as melt processable carbon fiber precursors,” Polymer, Vol. 43, No. 18, 2002, pp. 4841-4850.
  •  
  • 10. Godshall, D., Rangarajan, P., Baird, D.G., Wilkes, G.L., Bhanu, V.A., and McGrath, J.E., “Incorporation of methyl acrylate in acrylonitrile based copolymers: Effects on melting behavior,” Polymer, Vol. 44, No. 15, 2003, pp. 4221-4228.
  •  
  • 11. Rwei, S.-P., Way, T.-F., Chiang, W.-Y., and Tseng, J.-C., “Thermal analysis and melt spinnability of poly(acrylonitrile-co-methyl acrylate) and poly(acrylonitrile-co-dimethyl itaconate) copolymers,” Textile Research Journal, Vol. 88, No. 13, 2018, pp. 1479-1490.
  •  
  • 12. König, S., Kreis, P., Herbert, C., Wego, A., Steinmann, M., Wang, D., Frank, E., and Buchmeiser, M.R., “Melt-Spinning of an Intrinsically Flame-Retardant Polyacrylonitrile Copolymer,” Materials, Vol. 13, No. 21, 2020, 4826.
  •  
  • 13. Lee, J.H., Jin, J.-U., Park, S., Choi, D., You, N.-H., Chung, Y.-S., Ku, B.-C., and Yeo, H., “Melt processable polyacrylonitrile copolymer precursors for carbon fibers: Rheological, thermal, and mechanical properties,” Journal of Industrial and Engineering Chemistry, Vol. 71, 2019, pp. 112-118.
  •  
  • 14. Udakhe, J., and Goud, V., “Melt Processing of Polyacrylonitrile (PAN) Polymers,” Journal of the Textile Association, Vol. 71, No. 5, 2011, pp. 233-241.
  •  
  • 15. Liu, S.P., Han, K.Q., Chen, L., Zheng, Y., and Yu, M.H., “Structure and Performances of Plasticized Melt-Spun Polyacrylonitrile Precursor Fiber,” Applied Mechanics and Materials, Vol. 723, 2015, pp. 652-655.
  •  
  • 16. Batchelor, B.L., Mahmood, S.F., Jung, M., Shin, H., Kulikov, O.V., Voit, W., Novak, B.M., and Yang, D.J., “Plasticization for melt viscosity reduction of melt processable carbon fiber precursor,” Carbon, Vol. 98, 2016, pp. 681-688.
  •  
  • 17. Yang, D.J., Batchelor, B.L., Mahmood, S.F., Smith, D.W., Deng, W., Shin, H., and Jung, M., “Carbon fiber compositions and methods of making,” U.S. Patent No. 10,435,821, 2019.
  •  
  • 18. Mukundan, T., Bhanu, V.A., Wiles, K.B., Johnson, H., Bortner, M.J., Baird, D.G., Naskar, A.K., Ogale, A.A., Edie, D.D., and McGrath, J.E., “A photocrosslinkable melt processible acrylonitrile terpolymer as carbon fiber precursor,” Polymer, Vol. 47, No. 11, 2006, pp. 4163-4171.
  •  
  • 19. Jo, A.Y., Yoo, S.H., Chung, Y.-S., and Lee, S., “Effects of ultraviolet irradiation on stabilization of textile-grade polyacrylonitrile fibers without photo-initiator for preparing carbon fibers,” Carbon, Vol. 144, 2019, pp. 440-448.
  •  
  • 20. Park, S., Yoo, S.H., Kang, H.R., Jo, S.M., Joh, H.-I., and Lee, S., “Comprehensive stabilization mechanism of electron-beam irradiated polyacrylonitrile fibers to shorten the conventional thermal treatment,” Scientific Reports, Vol. 6, 2016, 27330.
  •  
  • 21. Yoo, S.H., Park, S., Park, Y., Lee, D., Joh, H.-I., Shin, I., and Lee, S., “Facile method to fabricate carbon fibers from textile-grade polyacrylonitrile fibers based on electron-beam irradiation and its effect on the subsequent thermal stabilization process,” Carbon, Vol. 118, 2017, pp. 106-113.
  •  
  • 22. König, S., Bauch, V., Herbert, C., Wego, A., Steinmann, M., Frank, E., and Buchmeiser, M.R., “High-Performance Carbon Fibers Prepared by Continuous Stabilization and Carbonization of Electron Beam-Irradiated Textile Grade Polyacrylonitrile Fibers,” Macromolecular Materials and Engineering, Vol. 306, No. 12, 2021, 2100484.
  •  
  • 23. Usselmann, M., Bansmann, J., and Kuehne, A.J.C., “Switchable Polyacrylonitrile-Copolymer for Melt-Processing and Thermal Carbonization—3D Printing of Carbon Supercapacitor Electrodes with High Capacitance,” Advanced Materials, Vol. 35, No. 6, 2023, 2208484.
  •  
  • 24. Saeed, G., Kang, T., Byun, J.S., Min, D., Kim, J.S., Sadavar, S.V., and Park, H.S., “Two-dimensional (2D) materials for 3D printed micro-supercapacitors and micro-batteries,” Energy Materials, Vol. 4, No. 3, 2024, 400023.
  •  
  • 25. Grand View Research, “Unmanned Composites Market (2026-2033) Size, Share & Trends Analysis Report by Product (Carbon Fiber Reinforced Polymer, Glass Fiber Reinforced Polymer), by Application (Interior, Exterior), by Region, and Segment Forecasts,” Grand View Research, 2026, Available at: https://www.grandviewresearch.com/industry-analysis/unmanned-composites-market-report (accessed June 10, 2026).
  •  
  • 26. Bidwai, S., “Carbon Fiber Market Size, Share and Trends 2026 to 2035,” Precedence Research, 2026, Available at: https://www.precedenceresearch.com/carbon-fiber-market (accessed June 10, 2026).
  •  
  • 27. Miller, G.C., Yu, J., Joseph, R.M., Choudhury, S.R., Mecham, S.J., Baird, D.G., Bortner, M.J., Norris, R.E., Paulauskas, F.L., and Riffle, J.S., “Melt-spinnable polyacrylonitrile copolymer precursors for carbon fibers,” Polymer, Vol. 126, 2017, pp. 87-95.
  •  
  • 28. Yu, J., Miller, G.C., Riffle, J.S., and Baird, D.G., “Identifying Melt Processing Conditions for a Polyacrylonitrile Copolymer Plasticized with Water, Acetonitrile and their Mixtures,” International Polymer Processing, Vol. 34, No. 3, 2019, pp. 307-313.
  •  
  • 29. König, S., Kreis, P., Reinders, L., Beyer, R., Wego, A., Herbert, C., Steinmann, M., Frank, E., and Buchmeiser, M.R., “Melt spinning of propylene carbonate-plasticized poly(acrylonitrile)-co-poly(methyl acrylate),” Polymers for Advanced Technologies, Vol. 31, No. 8, 2020, pp. 1827-1835.
  •  
  • 30. Yu, J., and Baird, D.G., “Study of Melt Spinning Processing Conditions for a Polyacrylonitrile Copolymer with a Water/Ethanol Mixture as a Plasticizer,” International Polymer Processing, Vol. 34, No. 5, 2019, pp. 557-563.
  •  
  • 31. Han, M., Song, W., and Kim, D.-W., “Sizing-agent control of the high-focusing and spread-ability of a melt-spun polyacrylonitrile-based carbon fiber and its interfacial shear strength,” Carbon Letters, Vol. 35, No. 1, 2025, pp. 343-349.
  •  

This Article

Correspondence to

  • Duck Joo Yang**, Bon-Cheol Ku*, ***, ****
  • * Institute of Advanced Composite Materials, Korea Institute of Science and Technology (KIST), Jeonbuk 55324, Republic of Korea
    ** Department of Chemistry & Biochemistry, The University of Texas at Dallas, Richardson, Texas 75080, USA
    *** Department of JBNU-KIST Industry-Academia Convergence Research, Graduate School, Jeonbuk National University, 54896, Republic of Korea
    **** Department of Mechanical Engineering, The University of Texas at Dallas, Richardson, Texas 75080, USA

  • E-mail: djyang@utdallas.edu, cnt@kist.re.kr