Original Article
  • Polyethylene-Based Low-Cost Carbon Fiber Manufacturing for Composites
  • Byeongwoo Im*,**, Duck-Joo Yang***, Soon Hyeok Hong**†, Seo Gyun Kim*†, Bon-Cheol Ku*,****,*****†

  • * Institute of Advanced Composite Materials, Korea Institute of Science and Technology (KIST), Jeonbuk 55324, Republic of Korea
    ** Department of Chemistry, Korea Advanced Institute of Science and Technology (KAIST), Daejeon 34141, Republic of Korea
    *** Department of Chemistry & Biochemistry, The University of Texas at Dallas, Richardson, Texas 75080, USA
    **** Department of Mechanical Engineering, The University of Texas at Dallas, Richardson, Texas 75080, USA
    ***** Department of JBNU-KIST Industry-Academia Convergence Research, Graduate School, Jeonbuk National University, 54896, Republic of Korea

  • 복합소재 적용을 위한 폴리에틸렌 기반 저가 탄소섬유 제조
  • 임병우*,** · 양덕주*** · 홍순혁**† · 김서균*† · 구본철*,****,*****†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Röding, T., Langer, J., Modenesi Barbosa, T., Bouhrara, M., and Gries, T., “A review of polyethylene‐based carbon fiber manufacturing,” Applied Research, Vol. 1, No. 3, 2022, pp. e202100013.
  •  
  • 2. Newcomb, B.A., “Processing, structure, and properties of carbon fibers,” Composites Part A: Applied Science and Manufacturing, Vol. 91, 2016, pp. 262–282.
  •  
  • 3. Morris, E.A., Weisenberger, M.C., Abdallah, M.G., Vautard, F., Grappe, H., Ozcan, S., Paulauskas, F.L., Eberle, C., Jackson, D., and Mecham, S.J., “High performance carbon fibers from very high molecular weight polyacrylonitrile precursors,” Carbon, Vol. 101, 2016, pp. 245–252.
  •  
  • 4. Kaur, J., Millington, K., and Smith, S., “Producing high‐quality precursor polymer and fibers to achieve theoretical strength in carbon fibers: A review,” Journal of Applied Polymer Science, Vol. 133, No. 38, 2016.
  •  
  • 5. Khayyam, H., Jazar, R.N., Nunna, S., Golkarnarenji, G., Badii, K., Fakhrhoseini, S.M., Kumar, S., and Naebe, M., “PAN precursor fabrication, applications and thermal stabilization process in carbon fiber production: Experimental and mathematical modelling,” Progress in Materials Science, Vol. 107, 2020, pp. 100575.
  •  
  • 6. Lee, J.H., Jin, J.-U., Park, S., Choi, D., You, N.-H., Chung, Y., Ku, B.-C., and Yeo, H., “Melt processable polyacrylonitrile copolymer precursors for carbon fibers: Rheological, thermal, and mechanical properties,” Journal of industrial and engineering chemistry, Vol. 71, 2019, pp. 112–118.
  •  
  • 7. Brown, K.R., Harrell, T.M., Skrzypczak, L., Scherschel, A., Wu, H.F., and Li, X., “Carbon fibers derived from commodity polymers: A review,” Carbon, Vol. 196, 2022, pp. 422-439.
  •  
  • 8. Choi, D., Kil, H.-S., and Lee, S., “Fabrication of low-cost carbon fibers using economical precursors and advanced processing technologies,” Carbon, Vol. 142, 2019, pp. 610–649.
  •  
  • 9. Laycock, B., Wang, X., Liu, R.-F., Annamalai, P.K., Cork, J., Derstine, C., Mills, M., and McFarland, E.W., “Pyrolysis of brominated polyethylene as an alternative carbon fibre precursor,” Polymer Degradation and Stability, Vol. 172, 2020, pp. 109057.
  •  
  • 10. Wortberg, G., De Palmenaer, A., Beckers, M., Seide, G., and Gries, T., “Polyethylene-based carbon fibers by the use of sulphonation for stabilization,” Fibers, Vol. 3, No. 3, 2015, pp. 373–379.
  •  
  • 11. Penning, J., Pras, H., and Pennings, A., “Influence of chemical crosslinking on the creep behavior of ultra-high molecular weight polyethylene fibers,” Colloid and Polymer Science, Vol. 272, No. 6, 1994, pp. 664–676.
  •  
  • 12. Postema, A., De Groot, H., and Pennings, A., “Amorphous carbon fibres from linear low density polyethylene,” Journal of Materials Science, Vol. 25, No. 10, 1990, pp. 4216–4222.
  •  
  • 13. Penning, J., Lagcher, R., and Pennings, A., “The effect of diameter on the mechanical properties of amorphous carbon fibres from linear low density polyethylene,” Polymer Bulletin, Vol. 25, No. 3, 1991, pp. 405–412.
  •  
  • 14. Hoogsteen, W., Kormelink, H., Eshuis, G., ten Brinke, G., Pennings, A., “Gel-spun polyethylene fibres,” Journal of Materials Science, Vol. 23, 1988, pp. 3467–3474.
  •  
  • 15. O’Connor, T.C., and Robbins, M.O., “Chain Ends and the Ultimate Strength of Polyethylene Fibers,” ACS Macro Letters, Vol. 5, No. 3, 2016, pp. 263–267.
  •  
  • 16. Choi, D., and Kim, C.B., “Small-Molecule Additive for Improving Polyethylene-Derived Carbon Fiber Fabrication,” Fibers and Polymers, Vol. 23, No. 6, 2022, pp. 1510–1514.
  •  
  • 17. Li, H., Sengeh, J., Agboola, O.D., Seo, J., Colby, R., and Chung, T.M., “Preparation and Characterization of Polyethylene Copolymers with PAH Side Groups as Carbon Fiber Precursors,” ACS Applied Polymer Materials, Vol. 5, No. 1, 2023, pp. 791–802.
  •  
  • 18. y Leon, L., 33 rd International SAMPE Technical Conference, 2001.
  •  
  • 19. Luo, G., Li, W., Han, N., Liu, H., and Zhang, X., “Fabrication of UV crosslinked polyethylene fiber for carbon fiber precursors,” Journal of Materials Science, Vol. 59, No. 31, 2024, pp. 14820–14832.
  •  
  • 20. Kim, J.W., and Lee, J.S., “Preparation of carbon fibers from linear low density polyethylene,” Carbon, Vol. 94, 2015, pp. 524–530.
  •  
  • 21. De Palmenaer, A., Wortberg, G., Drissen, F., Seide, G., and Gries, T., “Production of polyethylene based carbon fibres,” Chem Eng Trans, Vol. 43, 2015, pp. 1699–1704.
  •  
  • 22. Langer, J., Marter Diniz, F.A., Röding, T., Mahfouz, R., and Gries, T., “Upscaling the Production of Polyethylene-Based Precursor Fibres for Carbon Fibre Manufacturing: Challenges and Solutions,” Journal of Composites Science, Vol. 9, No. 12, 2025, pp. 653.
  •  
  • 23. Barton, B.E., Patton, J., Hukkanen, E., Behr, M., Lin, J.-C., Beyer, S., Zhang, Y., Brehm, L., Haskins, B., and Bell, B., “The chemical transformation of hydrocarbons to carbon using SO3 sources,” Carbon, Vol. 94, 2015, pp. 465–471.
  •  
  • 24. Hukkanen, E.J., Barton, B.E., Patton, J.T., Schlader, D.R., Zhang, Y., Qiu, X., Brehm, L., Haskins, B., Wang, W., and Horstman, N., “A novel continuous multiphase reactor for chemically processing polymer fibers,” Industrial & Engineering Chemistry Research, Vol. 57, No. 18, 2018, pp. 6123–6130.
  •  
  • 25. Barton, B.E., Hukkanen, E.J., Billovits, G.F., Schlader, D., Behr, M.J., Yancey, D., Rickard, M., Qiu, X., Mowery, D.M., and Brehm, L., “Ammoxidation of polyethylene: A new route to carbon,” Carbon, Vol. 130, 2018, pp. 288–294.
  •  
  • 26. Hunt, M.A., Saito, T., Brown, R.H., Kumbhar, A.S., and Naskar, A.K., “Patterned functional carbon fibers from polyethylene,” Advanced Materials, Vol. 24, No. 18, 2012, pp. 2386–2389.
  •  
  • 27. Xie, B., Hong, L., Chen, P., and Zhu, B., “Effect of sulfonation with concentrated sulfuric acid on the composition and carbonizability of LLDPE fibers,” Polymer Bulletin, Vol. 73, No. 3, 2016, pp. 891–908.
  •  
  • 28. Zhang, D., and Bhat, G.S., “Thermal characterization of sulfonated polyethylene fibers,” Thermochimica Acta, Vol. 226, 1993, pp. 123–132.
  •  
  • 29. Younker, J.M., Saito, T., Hunt, M.A., Naskar, A.K., and Beste, A., “Pyrolysis pathways of sulfonated polyethylene, an alternative carbon fiber precursor,” Journal of the American Chemical Society, Vol. 135, No. 16, 2013, pp. 6130–6141.
  •  
  • 30. Marter Diniz, F.A., Röding, T., Bouhrara, M., and Gries, T., “The Production of Ultra-Thin Polyethylene-Based Carbon Fibers out of an “Islands-in-the-Sea”(INS) Precursor,” Fibers, Vol. 11, No. 9, 2023, pp. 75.
  •  
  • 31. Choi, D., Yoo, S.H., and Lee, S., “Safer and more effective route for polyethylene-derived carbon fiber fabrication using electron beam rradiation,” Carbon, Vol. 146, 2019, pp. 9–16.
  •  
  • 32. Frank, E., Muks, E., Ota, A., Herrmann, T., Hunger, M., and Buchmeiser, M.R., “Structure evolution in polyethylene‐derived carbon fiber using a combined electron beam‐stabilization‐sulphurization approach,” Macromolecular Materials and Engineering, Vol. 306, No. 10, 2021, pp. 2100280.
  •  
  • 33. Kim, K.-W., Lee, H.-M., An, J.-H., Kim, B.-S., Min, B.-G., Kang, S.-J., An, K.-H., and Kim, B.-J., “Effects of cross-linking methods for polyethylene-based carbon fibers,” Carbon Letters, Vol. 16, No. 3, 2015, pp. 147–170.
  •  
  • 34. Barton, B.E., Behr, M.J., Patton, J.T., Hukkanen, E.J., Landes, B.G., Wang, W., Horstman, N., Rix, J.E., Keane, D., and Weigand, S., “High‐modulus low‐cost carbon fibers from polyethylene enabled by boron catalyzed graphitization,” Small, Vol. 13, No. 36, 2017, pp. 1701926.
  •  
  • 35. Bahl, O., and Manocha, L., “Effect of preoxidation conditions on mechanical properties of carbon fibres,” Carbon, Vol. 13, No. 4, 1975, pp. 297–300.
  •  
  • 36. Huang, X., “Fabrication and properties of carbon fibers,” Materials, Vol. 2, No. 4, 2009, pp. 2369–2403.
  •  
  • 37. Salim, N.V., Blight, S., Creighton, C., Nunna, S., Atkiss, S., and Razal, J.M., “The role of tension and temperature for efficient carbonization of polyacrylonitrile fibers: toward low cost carbon fibers,” Industrial & Engineering Chemistry Research, Vol. 57, No. 12, 2018, pp. 4268–4276.
  •  
  • 38. Behr, M.J., Landes, B.G., Barton, B.E., Bernius, M.T., Billovits, G.F., Hukkanen, E.J., Patton, J.T., Wang, W., Wood, C., and Keane, D.T., “Structure-property model for polyethylene-derived carbon fiber,” Carbon, Vol. 107, 2016, pp. 525–535.
  •  

This Article

Correspondence to

  • Soon Hyeok Hong**, Seo Gyun Kim*, Bon-Cheol Ku*,****,*****
  • * Institute of Advanced Composite Materials, Korea Institute of Science and Technology (KIST), Jeonbuk 55324, Republic of Korea
    ** Department of Chemistry, Korea Advanced Institute of Science and Technology (KAIST), Daejeon 34141, Republic of Korea
    **** Department of Mechanical Engineering, The University of Texas at Dallas, Richardson, Texas 75080, USA
    ***** Department of JBNU-KIST Industry-Academia Convergence Research, Graduate School, Jeonbuk National University, 54896, Republic of Korea

  • E-mail: soonhyeok.hong@kaist.ac.kr, seogyun.kim@kist.re.kr