Original Article
  • Design of a Broadband Radar Absorbing Sandwich Composite Structure Using PEEK/MWNTs 3D-printed Thickness-gradient Honeycomb Core
  • Seung-Hyeon Kang*, Jae-Won Shim*, Hyun-Jun Choi*, Jong-Gyeong Yoo**, O-bum Kwon**, Min-Je Hwang**, Young-Woo Nam*,***†

  • * Graduate School of Aerospace and Mechanical Engineering, Korea Aerospace University
    ** Low Observability Technology Team, Korea Aerospace Industries Ltd.
    *** Aeronautics Major, College of Engineering, Korea Aerospace University

  • 3D 프린팅 PEEK/MWNTs 두께 변화형 허니컴 코어 광대역 전파 흡수 샌드위치 복합재 구조의 설계 및 제작
  • 강승현* · 심재원* · 최현준* · 유종경** · 권오범** · 황민제** · 남영우*,***†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Dhumal, A., Bisht, M.S., Bhardwaj, A., Saikia, M., Malik, S., and Srivastava, K.V., “Screen Printed Polarization Independent Microwave Absorber for Wideband RCS Reduction,” IEEE Transactions on Electromagnetic Compatibility, Vol. 65, No. 1, 2022, pp. 96-103.
  •  
  • 2. Shi, H., Tian, J., Chen, N., and Zhu, W., “Wideband High-Efficiency Scattering Reduction in a Graphene Based Optically Transparent and Flexible Metasurface,” Carbon, Vol. 225, 2024, 119150.
  •  
  • 3. Chang, Q., Ji, J., Chen, K., Wu, W.C., and Ma, Y., “Transparent and Ultra-Thin Flexible Checkerboard Metasurface for Radar–Infrared Bi-Stealth,” Sensors, Vol. 24, No. 14, 2024, 4606.
  •  
  • 4. Chen, W., Balanis, C., Birtcher, C., and Modi, A., “Cylindrically Curved Checkerboard Surfaces for Radar Cross-Section Reduction,” IEEE Antennas and Wireless Propagation Letters, Vol. 17, No. 2, 2018, pp. 343-346.
  •  
  • 5. Ruiz-Perez, F., López-Estrada, S.M., Tolentino-Hernández, R.V., and Caballero-Briones, F., “Carbon-Based Radar Absorbing Materials: A Critical Review,” Journal of Science: Advanced Materials and Devices, Vol. 7, No. 3, 2022, 100454.
  •  
  • 6. Jia, Z., Lan, D., Lin, K., Qin, M., Kou, K., Wu, G., and Wu, H., “Progress in Low-Frequency Microwave Absorbing Materials,” Journal of Materials Science: Materials in Electronics, Vol. 29, No. 20, 2018, pp. 17122-17136.
  •  
  • 7. Liu, W., Tan, S., Yang, Z., and Ji, G., “Hollow Graphite Spheres Embedded in Porous Amorphous Carbon Matrices as Lightweight and Low-Frequency Microwave Absorbing Material Through Modulating Dielectric Loss,” Carbon, Vol. 138, 2018, pp. 143-153.
  •  
  • 8. Tong, G., Wu, W., Guan, J., Qian, H., Yuan, J., and Li, W., “Synthesis and Characterization of Nanosized Urchin-Like α-Fe₂O₃ and Fe₃O₄: Microwave Electromagnetic and Absorbing Properties,” Journal of Alloys and Compounds, Vol. 509, No. 11, 2011, pp. 4516-4521.
  •  
  • 9. Jin, D.H., Jang, M.S., Choi, J., Jang, W.H., Choi, W.H., and Kim, C.G., “Multi-Slab Hybrid Radar Absorbing Structure Containing Short Carbon Fiber Layer with Controllable Permittivity,” Composite Structures, Vol. 273, 2021, 114279.
  •  
  • 10. Tian, H., Liu, H., and Cheng, H., “A High-Temperature Radar Absorbing Structure: Design, Fabrication, and Characterization,” Composites Science and Technology, Vol. 90, 2014, pp. 202-208.
  •  
  • 11. Huang, H., Wang, W., Cao, T., Kuang, J., Deng, Y., Hua, M., and Xie, W., “Broadband Radar Absorbing Performance of Corrugated Structure,” Composite Structures, Vol. 253, 2020, 112779.
  •  
  • 12. Jang, M.S., Jang, W.H., Jin, D.H., Choi, W.H., and Kim, C.G., “Circuit-Analog Radar Absorbing Structures Using a Periodic Pattern Etched on Ni-Coated Glass Fabric,” Composite Structures, Vol. 281, 2022, 115099.
  •  
  • 13. Zhou, Q., Yin, X., Ye, F., Liu, X., Cheng, L., and Zhang, L., “A Novel Two-Layer Periodic Stepped Structure for Effective Broadband Radar Electromagnetic Absorption,” Materials & Design, Vol. 123, 2017, pp. 46-53.
  •  
  • 14. Narayan, S., Sreeja, J., Surya, V.V., Sangeetha, B., and Nair, R.U., “Radar Absorbing Structures Using Frequency Selective Surfaces—Trends and Perspectives,” Journal of Electronic Materials, Vol. 49, No. 3, 2020, pp. 1728-1741.
  •  
  • 15. Xiang, H., Shi, Y., Yang, Q., Wang, X., and He, Y., “Optimization Design of Honeycomb Absorbing Structure and Its Application in Aircraft Inlet Stealth,” Aerospace, Vol. 11, No. 10, 2024, 796.
  •  
  • 16. Zhou, D., Huang, X., and Du, Z., “Analysis and Design of Multilayered Broadband Radar Absorbing Metamaterial Using the 3-D Printing Technology-Based Method,” IEEE Antennas and Wireless Propagation Letters, Vol. 16, 2017, pp. 133-136.
  •  
  • 17. Li, D., Yang, J., Wang, X., and Gong, R., “Ultrabroadband Metamaterial Absorber Based on Effectively Coupled Multilayer HIS Loaded Structure With Dallenbach Layer,” IEEE Transactions on Microwave Theory and Techniques, Vol. 70, No. 1, 2022, pp. 232-238.
  •  
  • 18. Ma, J., Shi, Y., Meng, Q., Yao, B., Wang, J., Duan, J., Zhang, B., and Liu, Y., “A Radar-Infrared Compatible Stealth Metamaterial with Bird's Nest Morphology,” Journal of Alloys and Compounds, Vol. 986, 2024, 174137.
  •  
  • 19. Duan, Y., Wang, M., Chen, W., Huang, L., Jia, H., Liu, J., Pang, H., Shi, Y., Gong, J., and Wang, J., “Layered Metamaterials with Sierpinski Triangular Fractal Metasurface: Compatible Stealth for S-Band Radar and Infrared,” Materials Today Physics, Vol. 38, 2023, 101210.
  •  
  • 20. Kjelgård, K.G., Wisland, D.T., and Lande, T.S., “3D Printed Wideband Microwave Absorbers Using Composite Graphite/PLA Filament,” Proceedings of the 48th European Microwave Conference (EuMC), IEEE, 2018, pp. 859-862.
  •  
  • 21. Jiang, W., Yan, L., Ma, H., Fan, Y., Wang, J., Feng, M., and Qu, S., “Electromagnetic Wave Absorption and Compressive Behavior of a Three-Dimensional Metamaterial Absorber Based on 3D Printed Honeycomb,” Scientific Reports, Vol. 8, No. 1, 2018, 4817.
  •  
  • 22. Ren, J., and Yin, J.Y., “3D-Printed Low-Cost Dielectric-Resonator-Based Ultra-Broadband Microwave Absorber Using Carbon-Loaded Acrylonitrile Butadiene Styrene Polymer,” Materials, Vol. 11, No. 8, 2018, 1275.
  •  
  • 23. Petroff, M., Appel, J., Rostem, K., Bennett, C.L., Eimer, J., Marriage, T., Ramirez, J., and Wollack, E.J., “3D-Printed, Broadband Millimeter Wave Absorber,” Review of Scientific Instruments, Vol. 90, No. 2, 2019, 024701.
  •  
  • 24. Abdullahi, M., and Ali, M., “Additively Manufactured Metastructure Design for Broadband Radar Absorption,” Beni-Suef University Journal of Basic and Applied Sciences, Vol. 10, No. 1, 2021, 21.
  •  
  • 25. Yin, L., Doyhamboure, J., Tian, X., and Li, D., “Design and Characterization of Radar Absorbing Structure Based on Gradient-Refractive-Index Metamaterials,” Composites Part B: Engineering, Vol. 132, 2018, pp. 178-187.
  •  
  • 26. Viskadourakis, Z., Vasilopoulos, K., Economou, E., Soukoulis, C.M., and Kenanakis, G., “Electromagnetic Shielding Effectiveness of 3D Printed Polymer Composites,” Applied Physics A, Vol. 123, No. 12, 2017, 736.
  •  
  • 27. Valino, A.D., Dizon, J.R.C., Espera, A.H., Chen, Q., Messman, J., and Advincula, R.C., “Advances in 3D Printing of Thermoplastic Polymer Composites and Nanocomposites,” Progress in Polymer Science, Vol. 98, 2019, 101162.
  •  
  • 28. Blok, L.G., Longana, M.L., Yu, H., and Woods, B.K.S., “An Investigation into 3D Printing of Fibre Reinforced Thermoplastic Composites,” Additive Manufacturing, Vol. 22, 2018, pp. 176-186.
  •  
  • 29. Ren, T.N., Zhu, G.M., Zhang, C.S., and Hou, X., “Improving the Interface of Carbon-Fibre Reinforced Poly(Ether-Ether-Ketone) Composites with Fibre Surface Coating: A Review,” Polymer International, Vol. 71, No. 6, 2022, pp. 741-750.
  •  
  • 30. Shu, R.W., Guan, Y., and Liu, B.H., “Preparation of Nitrogen-Doped Reduced Graphene Oxide/Zinc Ferrite Nitrogen-Doped Carbon Composite for Broadband and High Efficient Electromagnetic Wave Absorption,” Journal of Materials Science & Technology, Vol. 214, 2024, pp. 16-26.
  •  
  • 31. Dang, J., Sun, J.Y., and Liu, Z., “Interfacial Strengthening and Processing of Carbon Fibers Reinforced Poly-Ether-Ether-Ketone Composites: A Mini-Review,” Polymer Composites, Vol. 45, No. 12, 2024, pp. 6788-6803.
  •  
  • 32. Idriss, H., Guselnikova, O., Postnikov, P., Kolska, Z., Hausild, P., Cech, J., Lyutakov, O., and Svorcík, V., “Versatile and Scalable Icephobization of Aerospace Composite by Surface Morphology and Chemistry Tuning,” ACS Applied Polymer Materials, Vol. 2, No. 3, 2020, pp. 977-986.
  •  
  • 33. Sun, Q., Wen, X., Yin, G., Jia, Z., and Yang, X., “Thermodynamic Coupling Forming Performance of Short Fiber-Reinforced PEEK by Additive Manufacturing,” Polymers, Vol. 16, No. 13, 2024, 1789.
  •  
  • 34. Huang, X., Zhang, X., Wei, G., Zhang, H., Tan, S., and Ji, G., “3D Printed PEEK/CF Nanocomposites Metamaterial for Enhanced Resonances Toward Microwave Absorption and Compatible Camouflage,” Materials Today Nano, Vol. 28, 2024, 100517.
  •  
  • 35. Lv, X., Yang, S., Pei, X., Zhang, Y., Wang, Q., and Wang, T., “Enhanced Mechanical and Tribological Properties of 3D Printed Short Carbon Fiber Reinforced Polyether Ether Ketone Composites,” Polymer Composites, Vol. 45, No. 12, 2024, pp. 8840-8860.
  •  
  • 36. Li, S., Yang, R., Sun, S., and Niu, B., “Advances in the Analysis of Honeycomb Structures: A Comprehensive Review,” Composites Part B: Engineering, Vol. 296, 2025, 112360.
  •  
  • 37. Han, Y., Yao, Q., Shi, S., Peng, X., Yi, B., Li, J., and Jiang, S., “Effect of Gradient Design on the Compressive and Energy Absorption Properties of 4D-Printed Deformable Honeycomb Structure,” Smart Materials and Structures, Vol. 34, No. 1, 2025, 015021.
  •  
  • 38. Guo, Z., and Xiao, J., “In-Plane Impact Dynamics of Thickness Gradient Honeycomb Structures with Negative Poisson’s Ratio Multi-Arc Concave Cells,” Mechanics of Advanced Materials and Structures, Vol. 31, No. 11, 2024, pp. 2386-2397.
  •  
  • 39. Kwak, B.S., Jeong, G.W., Choi, W.H., and Nam, Y.W., “Microwave-Absorbing Honeycomb Core Structure with Nickel-Coated Glass Fabric Prepared by Electroless Plating,” Composite Structures, Vol. 256, 2021, 113039.
  •  
  • 40. Wang, C., Ma, S., Li, D., Zhao, J., Zhou, H., Wang, D., Liu, C., Wang, S., and Chen, C., “Direct Ink Writing of Thermoresistant, Lightweight Composite Polyimide Honeycombs with Tunable X-Band Electromagnetic Wave Absorption Properties,” Additive Manufacturing, Vol. 70, 2023, 03543.
  •  
  • 41. Zhou, Q., Qi, C., Shi, T., Li, Y., Ren, W., Gu, S., Xue, B., Ye, F., Fan, X., and Du, L., “3D Printed Carbon Based All-Dielectric Honeycomb Metastructure for Thin and Broadband Electromagnetic Absorption,” Composites Part A: Applied Science and Manufacturing, Vol. 169, 2023, 107510.
  •  
  • 42. Li, S., Huang, H., Wu, S., Wang, J., Lu, H., and Xing, L., “Study on Microwave Absorption Performance Enhancement of Metamaterial/Honeycomb Sandwich Composites in the Low Frequency Band,” Polymers, Vol. 14, No. 19, 2022, 4055.
  •  
  • 43. Li, W., Xu, L., Zhang, X., Gong, Y., Ying, Y., Yu, J., Zheng, J., Qiao, L., and Che, S., “Investigating the Effect of Honeycomb Structure Composite on Microwave Absorption Properties,” Composites Communications, Vol. 19, 2020, pp. 182-188.
  •  
  • 44. Xiang, H., Shi, Y., Yang, Q., Wang, X., and He, Y., “Optimization Design of Honeycomb Absorbing Structure and Its Application in Aircraft Inlet Stealth,” Aerospace, Vol. 11, No. 5, 2024, 348.
  •  
  • 45. Li, D., Zheng, X., Gu, H., Xuan, X., Liu, B., Feng, H., and Zhang, F., “Gradient Honeycomb Metastructure with Broadband Microwave Absorption and Effective Mechanical Resistance,” Nano Materials Science, Vol. 6, No. 4, 2024, pp. 456-466.
  •  
  • 46. Lei, Y., Jia, X., Zhang, J., Hu, J., Kang, Y., and Zou, T., “An Ultra-Broadband Multi-Layer Dielectric Gradient Honeycomb Microwave Absorber Enhanced by the Double Layer Metasurface,” Optical Materials, Vol. 156, 2024, 16103.
  •  
  • 47. Hang, T., Zhou, L., Li, Z., Zheng, Y., Yao, Y., Cao, Y., Xu, C., Jiang, S., Chen, Y., and Zheng, J., “Constructing Gradient Reflection and Scattering Porous Framework in Composite Aerogels for Enhanced Microwave Absorption,” Carbohydrate Polymers, Vol. 329, 2024, 121729.
  •  
  • 48. Bauhofer, W., and Kovacs, J.Z., “A Review and Analysis of Electrical Percolation in Carbon Nanotube Polymer Composites,” Composites Science and Technology, Vol. 69, No. 10, 2009, pp. 1486-1498.
  •  
  • 49. Zhang, X., Wei, G., Huang, X., Zhang, H., Hao, X., Tan, S., Liu, K., and Ji, G., “Optimized Pyramidal Honeycomb PEEK/CF Composites Metastructure Through 3D Printing for Broadband Electromagnetic Wave Absorption,” Materials Today Physics, Vol. 45, 2025, 101620.
  •  

This Article

Correspondence to

  • Young-Woo Nam
  • * Graduate School of Aerospace and Mechanical Engineering, Korea Aerospace University
    *** Aeronautics Major, College of Engineering, Korea Aerospace University

  • E-mail: ywnam@kau.ac.kr