Original Article
  • Design of Anisotropic Piezoelectric Actuators Using Smooth Topology Optimization

  • Seyyed Ali Latifi Rostami*, Hyoung Jun Lim**†

  • * Aerospace Systems Research Center, Gyeongsang National University
    ** School of Mechanical and Aerospace Engineering, Gyeongsang National University

  • 매끄러운 위상 최적화 기법을 활용한 이방성 압전 액추에이터 설계

  • Seyyed Ali Latifi Rostami* · 임형준**†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Chaillet, N., and Régnier S., Microrobotics for Micromanipulation, John Wiley & Sons, 2013.
  •  
  • 2. Zou, J., and Xia, X., “Topology Optimization for Additive Manufacturing with Strength Constraints Considering Anisotropy,” Journal of Computational Design and Engineering, Vol. 10, 2023, pp. 892-904.
  •  
  • 3. Park, J., Kim, S.-R., Kim, K.-S., Kim, G., Kim, S.-H., Lee, B.-J., Jeong, A., An, J., Kim, S.J., and Lee, S.-M., “Effects of PZT Powder on Vibration and Compression Properties of Ti Powder/Polymer Concrete Composites,” Composites Research, Vol. 35, 2022, pp. 134-138.
  •  
  • 4. Zhou, Y., Nomura, T., Zhao, E., and Saitou, K., “Large-Scale Three-Dimensional Anisotropic Topology Optimization of Variable-Axial Lightweight Composite Structures,” Journal of Mechanical Design, Vol. 144, 2021.
  •  
  • 5. Liu, B., and Cui, Y.J., “Topology Optimization of Multi-material Structures Considering Anisotropic Yield Strengths,” Computer Methods in Applied Mechanics and Engineering, Vol. 418, 2024, 116520.
  •  
  • 6. Anurangi, J., Herath, M., Galhena, D.T., and Epaarachchi, J.J., “Electrochemical and Structural Performances of Carbon and Glass Fiber-reinforced Structural Supercapacitor Composite at Elevated Temperatures,” Functional Composites and Structures, Vol. 6, 2024, 035004.
  •  
  • 7. Silva, E.C.N., Fonseca, J.S.O., and Kikuchi, N.J., “Optimal Design of Piezoelectric Microstructures,” Computational Mechanics, Vol. 19, 1997, pp. 397-410.
  •  
  • 8. Kang, Z., Wang, R., and Tong, L.J., “Combined Optimization of Bi-material Structural Layout and Voltage Distribution for In-plane Piezoelectric Actuation,” Computer Methods in Applied Mechanics and Engineering, Vol. 200, 2011, pp. 1467-1478.
  •  
  • 9. Wang, S., Rong, W., Wang, L., Xie, H., Sun, L., and Mills, J.K.J., “A Survey of Piezoelectric Actuators with Long Working Stroke in Recent Years: Classifications, Principles, Connections and Distinctions,” Mechanical Systems and Signal Processing, Vol. 123, 2019, pp. 591-605.
  •  
  • 10. Schlinquer, T., Homayouni-Amlashi, A., Rakotondrabe, M., and Ousaid, A.M.J., “Design of Piezoelectric Actuators By Optimizing the Electrodes Topology,” IEEE Robotics and Automation Letters, Vol. 6, 2021, pp. 72-79.
  •  
  • 11. Fang, L., Meng, Z., Zhou, H., Wang, X., and Guo, X.J., “Topology Optimization of Piezoelectric Actuators Using Moving Morphable Void Method,” Structural and Multidisciplinary Optimization, Vol. 66, 2023, pp. 32.
  •  
  • 12. Latifi Rostami, S.A., Kolahdooz, A., Chung, H., Shi, M., and Zhang, J.J., “Robust Topology Optimization of Continuum Structures with Smooth Boundaries Using Moving Morphable Components,” Structural and Multidisciplinary Optimization, Vol. 66, 2023, pp. 121.
  •  
  • 13. Li, S., Yuan, S., Zhu, J., Wang, C., Li, J., and Zhang, W., “Additive Manufacturing-driven Design Optimization: Building Direction and Structural Topology,” Additive Manufacturing, Vol. 36, 2020, 101406.
  •  
  • 14. Ooms, T., Vantyghem, G., Thienpont, T., Van Coile, R., and De Corte, W., “Compliance-based Topology Optimization of Structural Components Subjected to Thermo-mechanical Loading,” Structural and Multidisciplinary Optimization, Vol. 66, 2023, pp. 126.
  •  
  • 15. So, S., and Kim, D., “Topology Optimization of a Lightweight Multi-material Cowl Cross Member Using Matrix Input with the Craig Bampton Nodal Method,” Composites Research, Vol. 32, 2019, pp. 243-248.
  •  
  • 16. McClintock, H., Temel, F.Z., Doshi, N., Koh, J.-S., and Wood, R.J., “The milliDelta: A High-bandwidth, High-precision, Millimeter-scale Delta Robot,” Science Robotics, Vol. 3, 2018, pp. eaar3018.
  •  
  • 17. Homayouni-Amlashi, A., Schlinquer, T., Mohand-Ousaid, A., and Rakotondrabe, M., “2D Topology Optimization MATLAB Codes for Piezoelectric Actuators and Energy Harvesters,” Structural and Multidisciplinary Optimization, Vol. 63, 2021, pp. 983-1014.
  •  
  • 18. Wang, Y., Luo, Z., Zhang, X., and Kang, Z., “Topological Design of Compliant Smart Structures with Embedded Movable Actuators,” Smart Materials and Structures, Vol. 23, 2014, 045024.
  •  
  • 19. Porn, S., Nasser, H., Coelho, R.F., Belouettar, S., and Deraemaeker, A., “Level Set Based Structural Optimization of Distributed Piezoelectric Modal Sensors for Plate Structures,” International Journal of Solids and Structures, Vol. 80, 2016, pp. 348-358.
  •  
  • 20. Zhang, X., and Kang, Z., “Dynamic Topology Optimization of Piezoelectric Structures with Active Control for Reducing Transient Response,” Computer Methods in Applied Mechanics and Engineering, Vol. 281, 2014, pp. 200-19.
  •  

This Article

Correspondence to

  • Hyoung Jun Lim

  • School of Mechanical and Aerospace Engineering, Gyeongsang National University

  • E-mail: hj.lim@gnu.ac.kr