Original Article
  • Study on Squeak Noises in Car AVN Materials under High Load and Low Speed Conditions

  • Tae Ho Park*, HuiYing Jin*, Jin Woo Jang**, Jonghwan Suhr*,**†

  • * School of Mechanical Engineering, Sungkyunkwan University, Suwon 16419, Korea
    ** Department of Polymer Science and Engineering, Sungkyunkwan University, Suwon 16419, Korea

  • 고하중 저속 조건에서의 자동차 AVN 소재의 스퀵 소음에 관한 연구

  • 박태호* · 김혜영* · 장진우** · 서종환*,**†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Shin, S.H., and Cheong, C., “Experimetal Characterization of Instrument Panel Buzz, Squeak, and Rattle (BSR) in a Vehicle,” Applied Acoustics, Vol. 71, No. 12, 2010, pp. 1162-1168.
  •  
  • 2. El-Essawi, M., Lin, J., and Sobek, G., “Analytical Predictions and Correlation with Physical Tests for Potential Buzz, Squeak, and Rattle Regions in a Cockpit Assembly”, 2004-01-0393, SAE, Warrendale, PA, 2004.
  •  
  • 3. Kim, S., Ko, D., Lee, H., Nam, J., and Lee, J., “A Study on Design Method for BSR Noise Reduction Based on Simulation of Vehicle Seat,” Transactions of the Korean Society of Automotive Engineers, Vol. 31, No. 3, 2023, pp. 199-208.
  •  
  • 4. Yeo, S., Jeong, Y., Choi, S., Kim, H., Park, G., and Shon, M., “Study on the Reduction of Stick-slip Noise in Acrylonitrile Butadiene Styrene-based Plastics Using Non-polar Additives to Reduce Friction,” The Journal of the Acoustical Society of Korea, 2024, Vol. 43, No. 1, pp. 49-59.
  •  
  • 5. Dong, C., Mo, J., Yuan, C., Bai, X., and Tian, Y., “Vibration and Noise Behaviors during Stick–slip Friction,” Tribology Letters/Tribology Letter, Vol. 67, No. 4, Sep. 2019.
  •  
  • 6. Cho, S.H., Yoon, B., Lee, S.H., Hong, K.M., and Suhr, J., “Investigation of Viscoelastic Properties of EPDM/PP Thermoplastic Vulcanizates for Reducing Innerbelt Weatherstrip Squeak Noise of Electric Vehicles”, Composites Research, Vol. 34, No. 3, 2021, pp. 192-198.
  •  
  • 7. Yoon, B., Kim, S., Lang, A., Egelkamp, C., Meier, J., Giese, U., Kim, B., Kim, J.H., Bae, J.W., Um, G.Y., Kim, S.H., Kim, D.I., Kim, S.J., and Suhr, J., “Friction Behaviors of Rice Husk Silica-reinforced Elastomer Composites in Contact with Rough Self-affine Surfaces,” Polymer Testing, Vol. 116, 2022, 107764.
  •  
  • 8. Nam, J.H., and Kang, J.Y., “A Basic Experimental Study on the Squeak Noise Using the Pin-on-disk,” Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 22, No. 8, 2012, pp. 736-741.
  •  
  • 9. Giannini, O., Akay, A., and Massi, F., “Experimental Analysis of Brake Squeal Noise on a Laboratory Brake Setup,” Journal of Sound and Vibration, Vol. 292, No. 1-2, 2006, pp. 1-20.
  •  
  • 10. Choi, S.U., Ahn, S., and Ih, K.D., “Basic Principle of BSR (Buzz, Squeak, Rattle) Noise according to the Generation Mechanism,” The Journal of the Acoustical Society of Korea, Vol. 37, No. 5, 2018, pp. 309-316.
  •  
  • 11. Spurr, R.T., “A Theory of Brake Squeal, Proceedings of the Automobile Division”, Institution Mechanical Engineers, Vol. 15, No. 1, 1961, pp. 33-52.
  •  
  • 12. Papinniemi, A., Lai, J.C.S., Zhao, J., and Loader, L., “Brake Squeal: A Literature Review,” Applied Acoustics, Vol. 63, No. 4, 2002, pp. 391-400.
  •  
  • 13. Ghazaly, N.M., El-Sharkawy, M., and Ahmed, I., “A Review of Automotive Brake Squeal Mechanisms,” Journal of Mechanical Design and Vibration, Vol. 1, No. 1, 2014, pp. 5-9.
  •  
  • 14. Park, J.H., and Lee, Y.Z., “The Evaluation of Noise Based on the Frictional Phenomena Using Automotive Interior Materials,” Tribology Transactions, Vol. 64, No. 5, 2021, pp. 777-783.
  •  
  • 15. Jacko, M., Tsang, P., and Rhee, S., “Automotive Friction Materials Evolution during the Past Decade,” Wear, Vol. 100, 1984, pp. 503-515.
  •  
  • 16. Brach, R., “Friction, Restitution, and Energy Loss in Planar Collisions,” Journal of Applied Mechanics, Vol. 51, No. 1, 1984, pp. 164-170.
  •  
  • 17. Novak, R., and Polcar, T., “Tribological Analysis of Thin Films by Pin-on-disc: Evaluation of Friction and Wear Measurement Uncertainty,” Tribology International, Vol. 74, 2014, pp. 154-163.
  •  
  • 18. Lee, D.G., Park, H.J., and Park, S.H., “Experimental Study on Friction Characteristics between Sliding Polymer Plates for Reduction of Stick-and-Slip Abnormal Noise,” Polymer (Korea), Vol. 37, No. 5, 2013, pp. 642-648.
  •  
  • 19. Hegde, S., and Suresh, B.S., “Study of Friction Induced Stick-Slip Phenomenon in a Minimal Disc Brake Model,” Journal of Mechanical Engineering and Automation, Vol. 5, No. 8, 2015, pp. 100-106.
  •  
  • 20. Stojanovic, N., Glisovic, J., Grujic, I., N., Narayan, S., Vasiljević, S., and Bošković, B., “Experimental and Numerical Modal Analysis of Brake Squeal Noise,” Mobility & Vehicle Mechanics, Vol. 44, No. 4, 2018, pp.73-85.
  •  

This Article

Correspondence to

  • Jonghwan Suhr

  • * School of Mechanical Engineering, Sungkyunkwan University, Suwon 16419, Korea
    ** Department of Polymer Science and Engineering, Sungkyunkwan University, Suwon 16419, Korea

  • E-mail: suhr@skku.edu