Review Article
  • Optimal Coating Materials and Methods to Enhance Interfacial Bonding with Steel Pipes in Marine Environments

  • Myung Kue Lee*, Dongchan Kim**, Min Ook Kim**†

  • * Department of Civil and Environmental Engineering, Jeonju University, Jeonju 55069, Korea
    ** Department of Civil Engineering, Seoul National University of Science and Technology, Seoul 01811, Korea

  • 해양 환경 노출 코팅 강관의 부착성능 확보를 위한 최적 코팅 및 공법연구

  • 이명규*· 김동찬**· 김민욱**†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Rajasärkkä, J., Pernica, M., Kuta, J., Lašňák, J., Šimek, Z., and Bláha, L., “Drinking water contaminants from epoxy resin-coated pipes: A field study,” Water Research, Vol. 103, 2016, pp. 133-140.
  •  
  • 2. Motlatle, A.M., Ray, S. S., Ojijo, V., and Scriba, M.R., “Polyester-based coatings for corrosion protection,” Polymers, Vol. 14, No. 16, 2022, p. 3413.
  •  
  • 3. Solovyeva, V.A., Almuhammadi, K.H., and Badeghaish, W.O., “Current downhole corrosion control solutions and trends in the oil and gas industry: a review,” Materials, Vol. 16, No. 5, 2023, p. 1795.
  •  
  • 4. Kim, C., Chen, L., Wang, H., and Castaneda, H., “Global and local parameters for characterizing and modeling external corrosion in underground coated steel pipelines: A review of critical factors,” Journal of Pipeline Science and Engineering, Vol. 1, No. 1, 2021, pp. 17-35.
  •  
  • 5. Kitayama, M., Yoshida, K., Kamon, T., Michishita, T., Kaneta, K., and Suzuki, Y., “Examination of heavy-duty, ultra-thick coating systems for offshore steel structures,” Transactions of the Iron and Steel Institute of Japan, Vol. 25, No. 11, 1985, pp. 1163-1170.
  •  
  • 6. Rahim, M.R., Study on the Current Performance of Piping and Structure Coatings in Oil and Gas Field, B.E Thesis, Universiti Teknologi Petronas, Malaysia, 2009.
  •  
  • 7. Ngasoh, O., Degradation of Epoxy Composite Coating Using Corrosion and Fracture Mechanics Framework, Ph.D Thesis, African University of Sience, Nigeria, 2021.
  •  
  • 8. Papavinasam, S., and Revie, R.W., “Review of standards for evaluating coatings to control external corrosion of pipelines,” Corrosion Reviews, Vol. 26, Nos. 5-6, 2008.
  •  
  • 9. Al-Khaldi, T., Inan, T.Y., Al-Mansour, M., Alrudayni, M., Manuel, A.T., Vidal, O.S., and Al-Tuwailib, A.A., “Failure of FBE coatings in gas transporting pipelines,” Materials Performance, 2020.
  •  
  • 10. Sadati, S., Arezoumandi, M., and Shekarchi, M., “Long-term performance of concrete surface coatings in soil exposure of marine environments,” Construction and Building Materials, Vol. 94, 2015, pp. 656-663.
  •  
  • 11. Khorasanizadeh, S., “The effects of shot and grit blasting process parameters on steel pipes coating adhesion,” World Academy of Science, Engineering and Technology, Vol. 66, No. 6, 2010, pp. 1304-1312.
  •  
  • 12. Olajire, A.A., “Recent advances on organic coating system technologies for corrosion protection of offshore metallic structures,” Journal of Molecular Liquids, Vol. 269, 2018, pp. 572-606.
  •  
  • 13. Liu, Y., Li, C.X., Huang, X.F., Ma, K., Luo, X.T., and Li, C.J., “Effect of water environment on particle deposition of underwater cold spray,” Applied Surface Science, Vol. 506, 2020, p. 144542.
  •  
  • 14. Lysogorski, D., Weather, B., Wier, T., Newbauer, T., & Coast Guard New London CT Research and Development Center. (2011). Ballast Water Treatment Corrosion Scoping Study. Coast Guard New London CT Research and Development Center.
  •  
  • 15. Piling Handbook, 9th edition, 2022.
  •  
  • 16. Ceravolo, R., Civera, M., Lenticchia, E., Miraglia, G., and Surace, C., “Detection and localization of multiple damages through entropy in information theory,” Applied Sciences, Vol. 11, No. 13, 2021, p. 5773.
  •  
  • 17. Salakhov, I.I., Shaidullin, N.M., Chalykh, A.E., Matsko, M.A., Shapagin, A.V., Batyrshin, A.Z., and Nifant’ev, I.E., “Low-temperature mechanical properties of high-density and low-density polyethylene and their blends,” Polymers, Vol. 13, No. 11, 2021, p. 1821.
  •  
  • 18. Alkordy, F.M., Evaluation of Organic Protective Coatings as Corrosion Prevention for the Interior of Subsea Pipelines in Sour Gas Service, M.E Thesis, Florida International University, USA, 2015.
  •  
  • 19. Fischer, K.P., Thomason, W.H., Rosbrook, T., and Murali, J., “Performance history of thermal-sprayed aluminum coatings in offshore service,” Materials Performance, Vol. 34, No. 4, 1995, pp. 27-35.
  •  
  • 20. Semerad, T.V., Corsiglia, F.A., Weaver, D.J., and Cox, G., “Testing of epoxy adhesives of a splash zone coating retrofit system for marine pipeline riser applications,” In NACE CORROSION, NACE-03042, 2003, pp. NACE-03042.
  •  
  • 21. Saprailis, H., Kovacs III, W., Tuggle, J.R., and Garfias-Mesias, L.F., “Characterization of internal and external coatings used on steel pipelines,” In NACE CORROSION, NACE-10038, 2010, pp. NACE-10038.
  •  
  • 22. Eom, S.H., Kim, S.S., and Lee, J.B., “Assessment of anti-corrosion performances of coating systems for corrosion prevention of offshore wind power steel structures,” Coatings, Vol. 10, No. 10, 2020, p. 970.
  •  
  • 23. Kehr, J.A., Fusion-bonded epoxy internal linings and external coatings for pipeline corrosion protection, Piping Handbook, USA, 1999.
  •  
  • 24. Jin, Q., Duan, W., Yao, L., Ding, W., Du, D., and Deng, P.A., “Durability assessment of substation steel components based on graphene coating,” In Mechatronics and Automation Technology, 2024, pp. 399-406.
  •  
  • 25. Branch, M., and Mahshahr, I., “Use of polyurethane coating to prevent corrosion in oil and gas pipelines transfer,” International Journal of Innovation and Applied Studies, Vol. 1, No. 2, 2012, pp. 186-193.
  •  
  • 26. Branch, M., and Mahshahr, I., “Study an analysis and suggest new mechanism of 3-layer polyethylene coating corrosion cooling water pipeline in oil refinery in Iran,” International Journal of Innovation and Applied Studies, Vol. 1, No. 2, 2012, pp. 216-225.
  •  
  • 27. Yamamoto, M., Kajiki, T., Kamon, T., and Yoshida, K., “Durability of various anti-corrosive organic coatings in marine environment for twelve years,” Corrosion Science and Technology, Vol. 3, No. 1, 2004, pp. 20-25.
  •  
  • 28. Holberg, S., Losada, R., Blaikie, F.H., Hansen, H.H., Soreau, S., and Onderwater, R.C., “Hydrophilic silicone coatings as fouling release: Simple synthesis, comparison to commercial, marine coatings and application on fresh water-cooled heat exchangers,” Materials Today Communications, Vol. 22, 2020, p. 100750.
  •  
  • 29. Zargarnezhad, H., Wong, D., Lam, C.C., and Asselin, E., “Uniform and local degradation of epoxy-based pipeline coatings under service conditions: salt transport and accelerated exposure analysis,” ChemRxiv, 2023.
  •  
  • 30. Melton, C., Development and Evaluation of Novel Corrosion Sensing & Protective Coatings based on Polymeric Powders for Marine Environments, Ph.D Thesis, University of Leicester, England (UK), 2022.
  •  
  • 31. Kim, S., Yi, J.H., Hong, H., Choi, S.I., Kim, D., and Kim, M.O., “Interfacial bond properties of underwater concrete coated with bisphenol A epoxy resins,” Polymers, Vol. 15, No. 21, 2023, p. 4290.
  •  
  • 32. Semerad, T.V., Corsiglia, F.A., Weaver, D.J., and Cox, G., “Testing of Epoxy Adhesives of a Splash Zone Coating Retrofit System for Marine Pipeline Riser Applications,” In NACE CORROSION, NACE-03042, 2003, pp. NACE-03042.
  •  
  • 33. Çil, G., and Gel, M., “The investigation of performance properties of the epoxy/glass flake composite coating on steel pile pipes,” İmalat Teknolojileri ve Uygulamaları, Vol. 3, No. 3, 2022, pp. 1-7.
  •  
  • 34. Saliba, P.A., Mansur, A.A., Santos, D.B., and Mansur, H.S., “Fusion-bonded epoxy composite coatings on chemically functionalized API steel surfaces for potential deep-water petroleum exploration,” Applied Adhesion Science, Vol. 3, 2015, pp. 1-22.
  •  
  • 35. Nabavian, S., Naderi, R., and Asadi, N., “Determination of optimum concentration of benzimidazole improving the cathodic disbonding resistance of epoxy coating,” Coatings, Vol. 8, No. 12, 2018, p. 471.
  •  
  • 36. Rahsepar, M., Asgharzadeh, M., Hadianfard, M.J., and Jenabali Jahromi, S.A., “Failure analysis of disbondment of three-layer polyethylene coatings from the surface of buried steel pipelines,” Journal of Failure Analysis and Prevention, Vol. 15, 2015, pp. 604-611.
  •  
  • 37. Gaber, M.A.W., “Impact of anti-corrosion liquid epoxy and fusion bond epoxy primer on mechanical testing of three layers polyethylene pipeline coating,” Journal of Applied Sciences Research, Vol. 8, No. 11, 2012, pp. 5349-5359.
  •  
  • 38. Samimi, A., Dokhani, S., Neshat, N., Almasinia, B., and Setoudeh, M., “The application and new mechanism of universal produce the 3-layer polyethylene coating,” International Journal of Advanced Scientific and Technical Research (IJAST), India, 2012, pp. 465-473.
  •  
  • 39. Thompson, I., and Saithala, J.R., “Review of pipeline coating systems from an operators perspective,” In NACE CORROSION, NACE-2013, 2013.
  •  
  • 40. Samimi, A., and Zarinabadi, S., “An analysis of polyethylene coating corrosion in oil and gas pipelines,” Journal of American Science, USA, 2011.
  •  
  • 41. Zargarnezhad, H., Asselin, E., Wong, D., and Lam, C.C., “A critical review of the time-dependent performance of polymeric pipeline coatings: Focus on hydration of epoxy-based coatings,” Polymers, Vol. 13, No. 9, 2021, p. 1517.
  •  
  • 42. Qazi, H.A.A., “Integrity assessment of 3LPE coated pipes stored in open environment for several years,” European Journal of Materials Science and Engineering, Vol. 7, 2022, pp. 143-149.
  •  
  • 43. Knudsen, O.Ø., Bjørgum, A., and Kvernbråten, A.K., “Internal coating of multiphase pipelines-requirements for the coating,” In NACE CORROSION, NACE-10004, 2010, pp. NACE-10004.
  •  
  • 44. Yang, F., Liu, T., Li, J., Qiu, S., and Zhao, H., “Anticorrosive behavior of a zinc-rich epoxy coating containing sulfonated polyaniline in 3.5% NaCl solution,” RSC Advances, Vol. 8, No. 24, 2018, pp. 13237-13247.
  •  
  • 45. Xia, R., Jia, C., Liu, C., Liu, P., and Zhang, S., “Non-uniform corrosion characteristics of the steel pipe pile exposed to marine environments,” Ocean Engineering, Vol. 272, 2023, p. 113873.
  •  
  • 46. Jofre-Reche, J.A., Fuensanta, M., Yáñez-Pacios, A., Colera, M., Rodriguez, F., Iglesias, I., and Martín-Martínez, J.M., “Improvement in adhesion, abrasion resistance, and aging of polyurethane coatings prepared with polycarbonate diol for internal pipelines,” Journal of Materials in Civil Engineering, Vol. 29, No. 10, 2017, p. 06017009.
  •  
  • 47. Fan, L., Tang, F., Chen, G., Reis, S.T., and Koenigstein, M.L., “Corrosion resistances of steel pipe coated with two types of enamel by two coating processes,” Journal of Materials Engineering and Performance, Vol. 27, 2018, pp. 5341-5349.
  •  

This Article

Correspondence to

  • Min Ook Kim

  • Department of Civil Engineering, Seoul National University of Science and Technology, Seoul 01811, Korea

  • E-mail: minookkim@seoultech.ac.kr