Original Article
  • Characteristics of Insertion Loss of Adhesive Tapes to Reduce Noise through Small Opening Hole

  • Yong Thung Cho*†

  • * Division of Mechanical and Automotive Engineering, Kongju National University

  • 미세한 공혈을 통한 소음의 저감을 위한 접착 테이프 별 삽입손실 특성

  • 조용성*†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Bhat, W.V., and Wilby, J.F., “Interior Noise Radiated by an Airplane Fuselage Subjected to Turbulent Boundary Layer Excitation and Evaluation of Noise Reduction Treatments,” Journal of Sound and Vibration, Vol. 18, No. 4, 1971, pp. 449-464.
  •  
  • 2. Krois, M., Dilger., K., Böhm, S., and Koch, S., “Use of Compliant Adhesive Layer in Direct Glazing of Road Vehicles for Improved Sound Attenuation,” International Journal of Adhesion and Adhesives, Vol. 23, 2003, pp. 413-425.
  •  
  • 3. Cho, S.H., Yoon, B.Y., Lee, S.H., Hong, K.M., Lee, S.H., and Suhr, J.H., “Investigation of Viscoelastic Properties of EPDM/PP Thermoplastic Vulcanizates for Reducing Innerbelt Weatherstrip Squeak Noise of Electric Vehicles,” Composite Research, Vol. 34, No. 3, 2021, pp. 192-198.
  •  
  • 4. Jones, D.I.G., and Parin, M.L., “Technique for Measuring Damping Properties of Thin Viscoelastic Layers,” Journal of Sound and Vibration, Vol. 24, No. 2, 1972, pp. 201-210.
  •  
  • 5. Wickert, J.A., “Analysis of Self-Excited Longitudinal Vibration of a Moving Tape,” Journal of Sound and Vibration, Vol. 160, No. 3, 1993, pp. 455-463.
  •  
  • 6. Ayad, M., Ünaldi S., Scius-Bertrand, M., Bras C.L., Fayolle, B., and Berthe, L., “Dynamical Modeling of Bi-Layer Aluminum Adhesive Tape for Laser Shock Application,” Optics and Laser Technology, Vol. 163, No.109366, 2023, pp. 449-464.
  •  
  • 7. Kim, D.S., Hwang, W., Park, H.C., and Park, W.S., “Design of Multilayer Composite-Antenna-Structure Considering Adhesive,” Journal of the Korean Society for Composite Materials, Vol. 20, No. 2, 2007, pp. 27-31.
  •  
  • 8. Park, D.C., and Kim, Y.H., “Effect of Surface Film on Void Behavior in Composite Integrated Structure,” Composite Research, Vol. 33, No. 3, 2020, pp. 147-152.
  •  
  • 9. Kovalchick, C., Molinari, A., and Ravichandran, G., “An Experimental Investigation of the Stability of Peeling for Adhesive Tapes,” International Journal of Adhesion and Adhesives, Vol. 66, 2013, pp. 69-78.
  •  
  • 10. Lee, J.H., Kim, J.W., Cheon, S.S., and Cho, J.U., “A Study on Fracture Property of Adhesive Interface at Tapered Double Cantilever Beam with Inhomogeneous Composite Material due to Loading Conditions of In-plane and Out-plane,” Composite Research, Vol. 33, No. 6, 2020, pp. 401-407.
  •  
  • 11. Shon, M.Y., “Evaluations of Lap Shear and Peel Strength for Epoxy and Polyurethane Adhesive Bonded Triplex Sheets at Cryogenic Temperature,” Journal of the Korean Society for Composite Materials, Vol. 24, No. 3, 2011, pp. 39-45.
  •  
  • 12. Kim, Y.H., Park, S.K., Kim, D.G., Ryu, Y.M., and Cheon, S.S., “A Study on the Shear Impact Characteristics of Adversely Bonded Tubular Joints,” Journal of the Korean Society for Composite Materials, Vol. 25, No. 1, 2012, pp. 14-18.
  •  
  • 13. Takahashi, K, Shimizu, M., Inaba, K., Kishimoto, K., Inao, Y., and Sugizaki, T., “Tack Performance of Pressure-Sensitive Adhesive Tapes under Tensile Loading,” International Journal of Adhesion and Adhesives, Vol. 45, 2013, pp. 90-97.
  •  
  • 14. Okeil, A.M., Ulger, T., and Babaizadeh, H., “Effect of Adhesive Type on Strengthening-By-Stiffening for Shear-Deficient Thin-Walled Steel Structures,” International Journal of Adhesion and Adhesives, Vol. 58, 2015, pp. 80-87.
  •  
  • 15. Ciardiello, R., Belingardi, G., Martorana, B., and Brunella, V., “Physical and Mechanical Properties of a Reversible Adhesive for Automotive Applications,” International Journal of Adhesion and Adhesives, Vol. 89, 2019, pp. 117-128.
  •  
  • 16. Hwang, Y.E., and Yoon, S.H., “Effect of Combined Environmental Factors on Adhesive Shear Strengths and Chemical Structures of Adhesives,” Journal of the Korean Society for Composite Materials, Vol. 24, No. 1, 2011, pp. 31-36.
  •  
  • 17. Dehnad, M., Jahani, K., Esmaeili, A., and Sadeghi, M., “Introducing and Innovative FRF-Based Method for Identification of an Adhesive Joint Characteristics,” International Journal of Adhesion and Adhesives, Vol. 130, 2024, pp. 1-11.
  •  
  • 18. Berntsen, J.F., Morin, D., Clausen, A.H., and Langseth, M., “Experimental Investigation and Numerical Modelling of the Mechanical Response of a Semi-Structural Polyurethane Adhesive,” International Journal of Adhesion and Adhesives, Vol. 95, 2019, pp. 1-12.
  •  
  • 19. Todoroki, A., Oasada, T., Mizutani, Y., Suzuki, Y., Ueda, M., Matsuzaki, R., and Hirano, Y., “Tensile Property Evaluations of 3D Printed Continuous Carbon Fiber Reinforced Thermoplastic Composites,” Advanced Composite Materials, Vol. 29, No. 2, 2020, pp. 147-162.
  •  
  • 20. Gowthaman, S., and Jagadeesha, T., “Impact of Nano Crack and Loading Direction on the Tensile Features of FeCr Alloy: a Molecular Dynamic Analysis,” Functional Composites and Structures, Vol. 6, 2024, pp. 1-11.
  •  
  • 21. Kudo, N., Fujita., R., Oya, Y., Sakai, T., Nagano, H., and Koyanagi, J., “Identification of Invisible Fatigue Damage of Thermosetting Epoxy Resin by Non-Destructive Thermal Measurement Using Entropy Generation,” Advanced Composite Materials, Vol. 33, No. 2, 2024, pp. 233-249.
  •  
  • 22. Choi, S.H., and Yoon, S.H., “Prediction of Long-Term Viscoelastic Performance of PET Film Using RH-DMA,” Composite Research, Vol. 32, No. 6, 2019, pp. 382-387.
  •  
  • 23. Nwambu, C., Robert, D., and Alam, P., “Dynamic Mechanical Thermal Analysis of Unaged and Hygrothermally Aged Discontinuous Bouligand Structured CFRP Composites,” Functional Composites and Structures, Vol. 4, 2022, pp. 1-11.
  •  
  • 24. Sugiyama, M., and Mizutani, Y., “Damage-Tolerance Design Method for Composite High-Pressure Hydrogen Vessels of Fuel Cell Vehicles and Stacking-Sequence Optimization Method Based on the Design Method,” Advanced Composite Materials, 2024, pp. 1-24.
  •  
  • 25. Kim, S.J., “Vibration and Damping Characteristic of Composite Laminates Embedding Directional Damping Materials,” Journal of the Korean Society for Composite Materials, Vol. 16, No. 5, 2003, pp. 39-44.
  •  
  • 26. Bae, S.Y., Bae, K.M., and Kim, Y.H., “Evaluation of Mechanical and Vibration Characteristics of Laminated Damping Aluminum Panel for Automobile Components,” Composite Research, Vol. 32, No. 2, 2019, pp. 113-119.
  •  
  • 27. Yu, S.H., Yun, H.S., Yeo, D.H., Lee, J.H., Park, J.S., and Sim, J.H., “Research on Evaluation of Properties of PA6/PA66/GF Composite According to Injection Pressure and Simulation of Damping Performance,” Composite Research, Vol. 37, No. 2, 2024, pp. 59-67.
  •  
  • 28. Yoon, M.H., and Oh, J.H., “Design of Multi-Auxetic Microstructures for Sound Absorbing Application,” Advanced Composite Materials, Vol. 32, No. 2, 2023, pp. 225-236.
  •  
  • 29. Irwin, J.D., and Grad, E.R., Industrial Noise and Vibration Control, Prentice-Hall, Inc., Englewood Cliffs, USA, 1979.
  •  
  • 30. Lord, H.W., Gatley, W.S., and Evenson, H.A., Noise Control for Engineers, McGraw-Hill Book. Co., New York, USA, 1980.
  •  

This Article

Correspondence to

  • Yong Thung Cho

  • Division of Mechanical and Automotive Engineering, Kongju National University

  • E-mail: cho.yong@gmail.com