Special Issue
  • Comparative Evaluation of Manufacturing Properties of Carbon Fiber Reinforced Thermoplastic Polymer (CFRTP) according to Nanofiller Type

  • Jun Ha Park*, Soon Ho Yoon*, Minkook Kim*†

  • * Institute of Advanced Composite Materials, Korea Institute of Science and Technology (KIST)

  • 나노필러 종류에 따른 열가소성 탄소 섬유강화 복합재료의 제작 물성 비교 평가

  • 박준하*· 윤순호*· 김민국*†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Biron, M., Thermoplastics and Thermoplastic Composites, William Andrew, 2018.
  •  
  • 2. Zhang, J., Chevali, V.S., Wang, H., and Wang, C.H., “Current Status of Carbon Fibre and Carbon Fibre Composites Recycling”, Composites Part B: Engineering, Vol. 193, 2020.
  •  
  • 3. Park, S.J., Lee, K.M., Park, S., and Kim, Y., “Adhesive Strength and Interface Characterization of CF/PEKK Composites with PEEK, PEI Adhesives Using High Temperature oven Welding Process”, Composites Research, Vol. 35, No. 2, 2022, pp. 86-92.
  •  
  • 4. Papadopoulos, A., Gkikas, G., Paipetis, A.S., and Barkoula, N.M., “Effect of CNTs Addition on the Erosive Wear Response of Epoxy Resin and Carbon Fibre Composites”, Composites Part A: Applied Science and Manufacturing, Vol. 84, 2016, pp. 299-307.
  •  
  • 5. Park, J.M., Wang, Z.J., Kwon, D.J., Gu, G.Y., Lee, W.I., and Park, J.K., and DeVries, KL., “Optimum Dispersion Conditions and Interfacial Modification of Carbon Fiber and CNT-phenolic Composites by Atmospheric Pressure Plasma Treatment”, Composites Part B: Engineering Vol. 43, No. 5, 2012, pp. 2272-2278.
  •  
  • 6. Cha, J., Kim, J., Ryu, S., and Hong, S.H., “Strengthening Effect of Melamine Functionalized Low-dimension Carbon at Fiber Reinforced Polymer Composites and Their Interlaminar Shear Behavior”, Composites Part B: Engineering, Vol. 173, 2019.
  •  
  • 7. Li, T.S., Li, M., Gu, Y.Z., Wang, S.K., Li, Q.W., and Zhang, Z.G., “Mechanical Enhancement Effect of the Interlayer Hybrid, CNT Film/carbon Fiber/epoxy, Composite”, Composites Science and Technology, Vol. 166, 2018, pp. 176-182.
  •  
  • 8. Choi, M., Lee, J., Ryu, S., and Ku, B.C., “Fabrication and Applications of Polyphenylene Sulfide (PPS) Composites: A Short Review”, Composites Research, Vol. 33, No. 3, 2020, pp. 91-100.
  •  
  • 9. Tanaka, K., Okuda, S., Hinoue, Y., and Katayama, T., “Effects of Water Absorption on the Fiber-Matrix Interfacial Shear Strength of Carbon Nanotube-Grafted Carbon Fiber Reinforced Polyamide Resin”, Journal of Composites Science, Vol. 3, No. 1, 2019, 4.
  •  
  • 10. Song, S.A., On, S.Y., Park, G.E., and Kim, S.S., “Improvement of Physical Properties for Carbon Fiber/PA 6,6 Composites”, Composites Research, Vol. 30, No. 6, 2017, pp. 365-370.
  •  

This Article

Correspondence to

  • Minkook Kim

  • Institute of Advanced Composite Materials, Korea Institute of Science and Technology (KIST)

  • E-mail: minkook@kist.re.kr