Original Article
  • Evaluation of Structural Performance of 3D Printed Composite Rudder according to Internal Topology Shape

  • Young-Jae Cho*, Hyoung-Seock Seo*†, Hui-Seung Park**

  • * School of Naval Architecture & Ocean Engineering, University of Ulsan
    ** Green Ship Research Division, Research Institute of Medium & Small Shipbuilding

  • 내부 위상 형상에 따른 3D 프린트 복합재 방향타의 구조 성능 평가

  • 조영재*· 서형석*† · 박희승**

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Park, C.H., Jang, H.Y., Park, M.S., and Im, N.K., “Result Analysis of Sea Trial Test for Offshore Fishing Boat Attached FRP Rudder,” Journal of Ocean Engineering and Technology, Vol. 27, No. 6, 2013, pp. 112-118.
  •  
  • 2. Song, L., Gao, T., Tang, L., Du, X., Zhu, J., Lin, Y., Shi, G., Liu, H., Zhou, G., and Zhang, W., “An All-movable Rudder Designed by Thermos-elastic Topology Optimization and Manufactured by Additive Manufacturing,” Computers & Structures, Vol. 243, 106405, 2021.
  •  
  • 3. Kim, B.S., and Suh, M.W., “Topology Optimization using an Optimality Criteria Method,” Transaction of the Korean Society of Automotive Engineers, Vol. 7, No. 8, 1999, pp. 224-331.
  •  
  • 4. Jeong, D.G., and Seo, H.S., “Study on Mechanical Performance of 3D Printed Composite Material with Topology Shape Using Finite Element Method,” Journal of Functional Composites and Structures, Vol. 3, No. 3, 2021, 035003.
  •  
  • 5. Somireddy, M., and Czekanski, A., “Anisotropic Material Behavior of 3D Printed Composite Structures – Material Extrusion Additive Manufacturing,” Materials and Design, Vol. 195, 2020.
  •  
  • 6. Yadav, P., Sahai, A., and Sharma, R.S., “Strength and Surface Characteristics of FDM-Based 3D Printed PLA Parts for Multiple Infill Design Patterns,” The Institution of Engineers, Vol. 102, No. 1, pp. 197-207, 2021.
  •  
  • 7. Na, D.H., and Kim, H.J., “A Study on Tensile Strength Dependent on Variation of Infill pattern and Density of PLA+ Material Using 3D Printing,” Transactions of Materials Processing, Vol. 31, No. 5, 2022.
  •  
  • 8. Wickramasinghe, S., Do, T., and Tran, P., “FDM-Based 3D Printing of Polymer and Associated Composite: A Review on Mechanical Properties, Defects and Treatments,” Polymers, Vol. 12, No. 7, 1529, 2020.
  •  
  • 9. Quan, F., Xin, R.H., and Goo, N.S., “Material Property Measurement of 3D Printed Carbon Fiber Composite Using a Digital Image Correction Method,” The Proceeding of the 2021 Asia-Pacific International Symposium on Aerospace Technology (APISAT 2021), Vol. 1, 2022, pp. 777-789.
  •  
  • 10. Korean Register of Shipping, “Rules and Guidance for the Classification of Hull Equipment,” 2023, p. 5.
  •  
  • 11. Zaharia, S.M., Enescu, L.A., and Pop, M.A., “Mechanical Performances of Lightweight Sandwich Strctures Produced by Material Extrusion-Based Additive Manufacturing,” Polymers, Vol. 12, No. 8, 1740, 2020.
  •  

This Article

Correspondence to

  • Hyoung-Seock Seo

  • School of Naval Architecture & Ocean Engineering, University of Ulsan

  • E-mail: seohs@ulsan.ac.kr