Original Article
  • Evaluation of Bonding Performance of Hybrid Materials According to Laser and Plasma Surface Treatment

  • Minha Shin*, Eun Sung Kim**, Seong-Jong Kim*†

  • * Commercialization Development 2, Korea Carbon Industry Promotion Agency, Jeonju 54853, Korea
    ** Department of Mechanical Engineering, Vision College of Jeonju, Jeonju 55069, Korea

  • 레이저 및 플라즈마 표면처리에 따른 이종소재 접합특성평가

  • 신민하*· 김은성**· 김성종*†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Son, D.I., So, S.W., Hwang, H.T., Choi, D.H., Choi, W.G., Kim, S.K., and Kim, D.I., “A Study on the Bonding Strength Analysis according to the Surface Treatment Characteristics of Aluminum Bar-Cowl Cross Member of Composite Material Injection Insert,” Journal of the Korean Society for Composite Materials, Vol. 33, No. 6, 2020, pp. 360-364.
  •  
  • 2. Lee, M.S., Kim, H.H., and Kang, C.G., “Effect of Surface Roughness of Al5052/CFRP Composites on the Adhesion and Mechanical Properties,” Journal of the Korean Society for Composite Materials, Vol. 26, No. 5, 2013, pp. 295-302.
  •  
  • 3. Kim, J.H., Cheong, S.K., and Kim, J.H., “Influence of Bonding Strength on Surface Pattern in Bonding of Carbon Fiber Reinforced Plastic and Metal”, Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 26, No. 4, 2017, pp. 430-435.
  •  
  • 4. Zhan, X., Li, Y., Gao, C., Wang, H., and Yang, Y., “Effect of Infrared Laser Surface Treatment on the Microstructure and Properties of Adhesively CFRP Bonded Joints” Optics and Laser Technology, Vol. 106, No. 9, 2018, pp. 398-409.
  •  
  • 5. Kim, M.S., “A Study on Adhesion Properties between Composite Material and Aluminum according to the physical surface treatment technique”, Journal of the Korean Academia-Industrial cooperation Society, Vol. 21, No. 11, 2020, pp. 334-339.
  •  
  • 6. Al-Zubaidy, H., Al-Mahaidi, R., and Zhao, X.-L., “Experimental Investigation of Bond Characteristics between CFRP Fabrics and Steel Plate Joints under Impact Tensile Loads,” Polymer Composite, Vol. 94, No. 2, 2019, pp. 510-518.
  •  
  • 7. Çoban, O., Akman., E., Bora, M.Ö., Oztoprak, B.G., and Demir, A., “Laser Surface Treatment of CFRP Composites for a Better Adhesive Bonding Owing to the Mechanical Interlocking Mechanism,” Composite Structures, Vol. 40, No. 9, 2012, pp. 3611-3622.
  •  
  • 8. Sundriyal, P., Pandey, M., and Bhattacharya, S., “Plasma-assisted Surface Alteration of Industrial Polymers for Improved Adhesive Bonding,” International Journal of Adhesion and Adhesives, Vol. 101, No. 6, 2020, 102626.
  •  
  • 9. Martínez-Landeros, V.H., Vargas-Islas, S.Y., Cruz-González, C.E., Barrera, S., Mourtazov, K., and Ramírez-Bon, R., “Studies on the Influence of Surface Treamtne Type, in the Effectiveness of Structural Adhesive Bonding, for Carbon Fiver Reinforced Composites,” Journal of Manufacturing Process, Vol. 39, No. 3, 2019, pp. 160-166.
  •  
  • 10. Harder, S., Schmutzler, H., Hergoss, P., De, J.F., Hotmannspötter, J., and Fiedler, B., “Effect of Infrared Laser Surface Treatment on the Morphology and Adhesive Properties of Scarfed CFRP Surface,” Composite Part A: Applied Science and Manufacturing, Vol. 121, No. 6, 2019, pp. 299-307.
  •  
  • 11. Matthews, F.L., Kilty, P.F., and Godwin, E.W., “A Review of the Strength of Joints in Fibre-reinforced Plastics. Part 2. Adhesively Bonded Joints,” Composites, Vol. 13, No. 1, 1982, pp. 29-37.
  •  
  • 12. He, X., “A Review of Finite Element Analysis of Adhesively Bonded Joints,” International Journal of Adhesion and Adhesives, Vol. 31, No. 4, 2011, pp. 248-264.
  •  
  • 13. Gude, M.R., Prolongo, S.G., and Ureña, A., “Hydrothermal Ageing of Adhesive Joints with Nanoreinforced Adhesives and Different Surface Treatments of Carbon Fibre/epoxy Substrates,” International Journal of Adhesion and Adhesives, Vol. 40, No. 1, 2013, pp. 179-187.
  •  
  • 14. Liu, L., Liu, X., Kong, L., Wang, M., Hu, P., and Wang, D., “Effect of Laser Surface Treatment on Surface and Bonding Properties of Carbon Fiber Reinforced Composites”, International Journal of Material Forming, Vol. 13, No. 1, 2020, pp. 885-895.
  •  
  • 15. Sun, C., Min, J., Lin, J., and Wan, H., “Effect of Atmospheric Pressure Plasma Treatment on Adhesive Bonding of Carbon Fiber Reinforced Polymer”, Polymers, Vol. 11, No. 1, 2019 pp. 1-19.
  •  
  • 16. Rudawska, A., Assessment of Surface Preparation for the Bonding/Adhesive Technology, Elsevier Inc. Co., London, UK, 2019.
  •  
  • 17. Zhan, X., Li, Y., Gao, C., Wang, H., and Yang, Y., “Effect of Infrared Laser Surface Treatment on the Microstructure and Properties of Adhesively CFRP Bonded Joints,” Optics and Laser Technology, Vol. 106, No. 9, 2018, pp. 398-409.
  •  
  • 18. Bionghi, R., Shahraki, D., Ameri, M.,and Karimi, M.M., “Correction between Bond Strength and Surface Free Energy Parameters of Asphalt Binder-aggregate System,” Construction and Building Materials, Vol. 303, No. 38, 2021, pp. 398-409.
  •  
  • 19. Wetzel, M., Holtmannspötter, J., Gudladt, H.-J., and Czarnecki, J.V., “Sensitivity of Double Cantilever Beam Test to Surface Contamination and Surface Pretreatment,” International Journal of Adhesion and Adhesives, Vol. 46, No. 7, 2013, pp. 114-121.
  •  
  • 20. Leone, C., Papa, I., Tagliaferri, F., and Lopresto, V., “Investigation of CFRP Laser Milling Using a 30W Q-switched Yb:YAG Fiber Laser: Effect of Process Parameters on Removal Mechanisms and HAZ Formation,” Composite Part A: Applied Science and Manufacturing, Vol. 55, No. 12, 2013, 129-142.
  •  

This Article

Correspondence to

  • Seong-Jong Kim

  • Commercialization Development 2, Korea Carbon Industry Promotion Agency, Jeonju 54853, Korea

  • E-mail: sjongkim@kcarbon.or.kr