Special Issue
  • Comparison of Resin Impregnation and Mechanical Properties of Composites Based on Fiber Plasma Treatment

  • Seong Baek Yang**, Donghyeon Lee*, Yongseok Lee*, Dong-Jun Kwon*,**†

  • * Department of Materials Science and Convergence Technology, Gyeongsang National University, 52828 Jinju, Republic of Korea
    ** Research Institute for Green Energy Convergence Technology, Gyeongsang National University, 52828 Jinju, Republic of Korea

  • 섬유 플라즈마 처리에 따른 복합재료의 수지 함침성 및 기계적 특성 비교

  • 양성백**· 이동현*· 이용석*· 권동준*,**†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Oliveux, G., Dandy, L.O., and Leeke, G.A., “Current Status of Recycling of Fibre Reinforced Polymers: Review of Technologies, Reuse and Resulting Properties,” Progress in Materials Science, Vol. 72, 2015, pp. 61-99.
  •  
  • 2. Qureshi, J., “A Review of Recycling Methods for Fibre Reinforced Polymer Composites,” Sustainability, Vol. 14, No. 24, 2022, pp. 16855.
  •  
  • 3. Shojaei, A., Ghaffarian, S.R., and Karimian, S.M.H., “Modeling and Simulation Approaches in the Resin Transfer Molding Process: A Review,” Polymer Composites, Vol. 24, No. 4, 2003, pp. 525-544.
  •  
  • 4. Trochu, F., Gauvin, R., and Gao, D.M., Numerical Analysis of the Resin Transfer Molding Process by the Finite Element Method,” Advances in Polymer Technology: Journal of the Polymer Processing Institute, Vol. 12, No. 4, 1993, pp. 329-342.
  •  
  • 5. Rudd, C.D., Long, A.C., Kendall, K.N., and Mangin, C., “Liquid Moulding Technologies: Resin Transfer Moulding, Structural Reaction Injection Moulding and Related Processing Techniques,” Elsevier, pp. 65-99, 1997.
  •  
  • 6. Henning, F., Kärger, L., Dörr, D., Schirmaier, F.J., Seuffert, J., and Bernath, A., “Fast Processing and Continuous Simulation of Automotive Structural Composite Components,” Composites Science and Technology, Vol. 171, 2019, pp. 261-279.
  •  
  • 7. Lee, J., Lim, J.W., and Kim, M., “Effect of Thermoplastic Resin Transfer Molding Process and Flame Surface Treatment on Mechanical Properties of Carbon Fiber Reinforced Polyamide 6 Composite,” Polymer Composites, Vol. 41, No. 4, 2020, pp. 1190-1202.
  •  
  • 8. Han, B.J., Jeong, Y.C., Kim, C.M., Kim, R.W., and Kang, M., “Forming Characteristics during the High-pressure Resin Transfer Molding Process for CFRP”, Advanced Composite Materials.Vol. 28, 2018, pp. 365-382.
  •  
  • 9. Fleischer, J., Teti, R., Lanza, G., Mativenga, P., Möhring, H.C., and Caggiano, A., “Composite Materials Parts Manufacturing,” CIRP Annals, Vol. 67, No. 2, 2018, pp. 603-626.
  •  
  • 10. George, A., Optimization of Resin Infusion Processing for Composite Materials: Simulation and Characterization Strategies, 2011.
  •  
  • 11. National Research Council, “High-performance Structural Fibers for Advanced Polymer Matrix Composites,” National Academies Press, 2005.
  •  
  • 12. Safin, R.R., Khasanshin, R., Galyavetdinov, N., Salimgaraeva, R., Mukhametzyanov, S., Safina, A., and Kraysman, N., “Improving the Physical and Mechanical Performance of Laminated Wooden Structures by Low-Temperature Plasma Treatment,” Coatings, Vol. 11, No. 8, 2021, pp. 918.
  •  
  • 13. Ma, K., Chen, P., Wang, B., Cui, G., and Xu, X., “A Study of the Effect of Oxygen Plasma Treatment on the Interfacial Properties of Carbon Fiber/epoxy Composites,” Journal of Applied Polymer Science, Vol. 118, No. 3, 2010, pp. 1606-1614.
  •  
  • 14. Dilsiz, N., “Plasma Surface Modification of Carbon Fibers: A Review,” Journal of Adhesion Science and Technology, Vol. 14, No. 7, 2000, pp. 975-987.
  •  
  • 15. Park, S.J., “Carbon Fibers,” Vol. 210, Dordrecht, The Netherlands:: Springer, 2015.
  •  
  • 16. Vandenabeele, C.R., and Lucas, S., “Technological Challenges and Progress in Nanomaterials Plasma Surface Modification–a Review,” Materials Science and Engineering: R: Reports, Vol. 139, 2020, pp. 100521.
  •  
  • 17. De Munck, J.D., Van Landuyt, K., Peumans, M., Poitevin, A., Lambrechts, P., Braem, M., and Van Meerbeek, B., “A Critical Review of the Durability of Adhesion to Tooth Tissue: Methods and Results,” Journal of Dental Research, Vol. 84, No. 2, 2005, pp. 118-132.
  •  
  • 18. Ma, K., Chen, P., Wang, B., Cui, G., and Xu, X., “A Study of the Effect of Oxygen Plasma Treatment on the Interfacial Properties of Carbon Fiber/epoxy Composites,” Journal of Applied Polymer Science, Vol. 118, No. 3, 2010, pp. 1606-1614.
  •  
  • 19. Chu, P.K., Chen, J.Y., Wang, L.P., and Huang, N., “Plasma-surface Modification of Biomaterials,” Materials Science and Engineering: R: Reports, Vol. 36, No. 5-6, 2002, pp. 143-206.
  •  
  • 20. Liu, J., Xue, Y., Dong, X., Fan, Y., Hao, H., and Wang, X., “Review of the Surface Treatment Process for the Adhesive Matrix of Composite Materials,” International Journal of Adhesion and Adhesives, Vol. 126, 2023, pp. 103446.
  •  
  • 21. Kang, H.K., Kim, J.Y., Kim, H.Y., and Choi, Y.O., “Study of Stabilization Process of PAN Precursor and Its Characteristics Change by Plasma Treatment,” Composites Research, Vol. 34, No. 1, 2021, pp. 23-29.
  •  
  • 22. Kwon, D.J., Shin, P.S., Kim, J.H., DeVries, K.L., and Park, J.M., “Interfacial and Wetting Properties of Carbon Fiber Reinforced Epoxy Composites with Different Hardeners by Electrical Resistance Measurement,” Polymer Testing, Vol. 53, 2016, pp. 293-298.
  •  
  • 23. Kwon, D.J., Shin, P.S., Kim, J.H., Lee, H.I., Park, J.K., and Park, J.M., “Effects of Solvent-Based Dilution Condition on CNT Dispersion in CNT/Epoxy Composites,” Composites Research, Vol. 29, No. 4, 2016, pp. 125-131.
  •  
  • 24. Jang, J., Moon, S., “Studies on Carbon Fiber/Ultra High Modulus Polyethylene Fiber Hybrid Composite, I. Performance Improvement by Using Plasma Etching,” Composites Research, Vol. 6, No. 2, 1993, pp. 33-43.
  •  
  • 25. Shin, P.S., Baek, Y.M., Kim, J.H., and Kwon, D.J., “The Factor Influencing Self-sensing Property of Carbon Fiber,” Composites Science and Technology, Vol. 238, 2023, pp. 110017.
  •  

This Article

Correspondence to

  • Dong-Jun Kwon

  • * Department of Materials Science and Convergence Technology, Gyeongsang National University, 52828 Jinju, Republic of Korea
    ** Research Institute for Green Energy Convergence Technology, Gyeongsang National University, 52828 Jinju, Republic of Korea

  • E-mail: djkwon@gnu.ac.kr