Original Article
  • Prediction of Temperature and Degree of Cure of Carbon Fiber Composites Considering Thermal Chemical Reaction

  • Jae-Woo Yu*, Wie-Dae Kim*†

  • * Aircraft Structural Design Lab, Department of Aerospace Engineering, Pusan National University

  • 화학 반응열을 고려한 탄소 섬유 복합재 온도와 경화도 예측

  • 유재우*· 김위대*†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Baran, I., Cinar, K., Ersoy, N., Akkerman, R., and Hattel, J.H., “A Review on the Mechanical Modeling of Composite Manufacturing Processes,” Archives of Computational Methods in Engineering, Vol. 24, 2017, pp. 365-395.
  •  
  • 2. Albert, C., and Fernlund, G., “Spring-in and Warpage of Angled Composite Laminates,” Composites Science and Technology, Vol. 62, No. 14, 2002, pp. 1895-1912.
  •  
  • 3. Jung, S.R., and Kim, W.D., “Analysis of Thermal Deformation of Carbon-fiber Reinforced Polymer Matrix Composite Considering Viscoelasticity,” Journal of the Korean Society for Composite Materials, Vol. 27, No. 4, 2014, pp. 174-181.
  •  
  • 4. Seong, D.Y., and Kim, W.D., “Thermal Deformation Analysis of L-shaped Composite During Cure Process by Viscoelastic Model,” Journal of the Korean Society for Composite Materials, Vol. 33, No. 4, 2020, pp. 220-227.
  •  
  • 5. Kim, Y.S., and Kim, W.D., “Prediction of Spring-in Deformation of carbon Fiber Reinforced Composite by Thermal Residual Stress,” Journal of the Korean Society for Composite Materials, Vol. 30, No. 6, 2017, pp. 410-415.
  •  
  • 6. Sung, S.H., and Kim, W.D., “Prediction of Deformation of Carbon-fiber Reinforced Polymer Matrix Composite for Tool Materials and Surface Conditions,” Journal of the Korean Society for Composite Materials, Vol. 27, No. 6, 2014, pp. 231-235.
  •  
  • 7. Chiao, L., and Lyon, R.E., “A Fundamental Approach to Resin Cure Kinetics,” Journal of Composite Materials, Vol. 24, No. 7, 1990, pp. 739-752.
  •  
  • 8. Abaqus, I., Abaqus documentation Version 6, 2014.
  •  
  • 9. Gang, J.H., and Kim, S.D., “Finite Element Analysis of an Epoxy Curing Processes by using Abaqus User Subroutine,” Computational Structural Engineering, Vol. 28, No. 4, 2015, pp. 7-11.
  •  
  • 10. Kim, Y.K., and White, S.R., “Viscoelastic Analysis of Processing-induced Residual Stresses in Thick Composite Laminates,” Mechanics of Composite Materials and Structures an International Journal, Vol. 4, No. 4, 1997, pp. 361-387.
  •  
  • 11. Lee, W.I., Loos, A.C., and Springer, G.S., “Heat of Reaction, Degree of Cure, and Viscosity of Hercules 3501-6 Resin,” Journal of Composite Materials, Vol. 16, No. 6, 1982, pp. 510-520.
  •  
  • 12. Leanos, A.L., and Prabhakar, P., “Computational Modeling of Carbon/carbon Composites under Thermal Shock Conditions,” Composite Structures, Vol. 143, 2016. pp. 103-116.
  •  

This Article

Correspondence to

  • Wie-Dae Kim

  • Aircraft Structural Design Lab, Department of Aerospace Engineering, Pusan National University

  • E-mail: wdkim@pusan.ac.kr