Original Article
  • Progressive Damage and Failure Analysis of Open-Hole Composite Specimens Under Compressive Loading Using Finite Element Analysis

  • Young Cheol Kim*, Geunsu Joo*, Hong-Kyu Jang*†, Jinbong Kim*, Min-Gyu Kang*, Woo-Kyoung Lee*, Ji Hoon Kim**†

  • * Department of Composite Structure & System, Korea Institute of Materials Science
    ** Department of Mechanical Engineering, Pusan National Universit

  • 유한요소해석을 이용한 압축 하중을 받는 오픈 홀 복합재 시편의 점진적 손상 및 파손 분석

  • 김영철*· 주근수*· 장홍규*†· 김진봉*· 강민규*· 이우경*· 김지훈**†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Davies, C., and Ilcewicz, L., CMH-17, Vol. 3 Polymer Matrix Composites Materials Usage, SAE International, Warrendale, PA, USA, 2012.
  •  
  • 2. Spendley, Paul R., Design Allowables for Composite Aerospace Structures, PhD Thesis, University of Surrey, UK, 2012.
  •  
  • 3. Cumbo, R., Baroni, A., Ricciardi, A., and Corvaglia, S., “Design Allowables of Composite Laminates: A Review,” Journal of Composite Materials, Vol. 56, No. 23, 2022, pp. 3617-3634.
  •  
  • 4. Icardi, U., Locatto, S., and Longo, A., “Assessment of Recent Theories for Predicting Failure of Composite Laminates,” Applied Mechanics Reviews, Vol. 60, 2007, pp. 76-86.
  •  
  • 5. Liu, P.F., and Zheng, J.Y., “Recent Developments on Damage Modeling and Finite Element Analysis for Composite Laminates: A Review,” Materials & Design, Vol. 31, No. 8, 2010, pp. 3825-3834.
  •  
  • 6. Whitney, J.M., and Nuismer, R.J., “Stress Fracture Criteria for Laminated Composites Containing Stress Concentrations,” Journal of Composite Materials, Vol. 8, No. 3, 2010, pp. 253-265.
  •  
  • 7. Lee, H.J., Shin, I.S., Jeong, M.G., Kweon, J.H., and Choi, J.H., “A Method to Predict the Open-Hole Tensile Strength of Composite Laminate,” Composites Research, Vol. 24, No. 4, 2011, pp. 29-35.
  •  
  • 8. Soutis, C., Fleck, N.A., and Smith, P.A., “Failure Prediction Technique for Compression Loaded Carbon Fibre-epoxy Laminate with Open Holes,” Journal of Composite Materials, Vol. 25, No. 11, 1991, pp. 1476-1498.
  •  
  • 9. Chang, F.K., and Lessard, L.B., “Damage Tolerance of Laminated Composites Containing an Open Hole and Subjected to Compressive Loadings: Part I—Analysis,” Journal of Composite Materials, Vol. 25, No. 1, 1991, pp. 2-43.
  •  
  • 10. Hashin, Z., and Rotem, A., “A Fatigue Failure Criterion for Fiber Reinforced Materials,” Journal of Composite Materials, Vol. 7, No. 4, 1973, pp. 448-464.
  •  
  • 11. Hashin, Z., “Fatigue Failure Criteria for Unidirectional Fiber Composites,” Journal of Applied Mechanics, Vol. 47, No. 2, 1980, pp. 329-334.
  •  
  • 12. Benzeggagh, M.L., and Kenane, M.J.C.S., “Measurement of Mixed-mode Delamination Fracture Toughness of Unidirectional Glass/epoxy Composites with Mixed-mode Bending Apparatus,” Composites Science and Technology, Vol. 56, No. 4, 1996, pp. 439-449.
  •  
  • 13. ASTM D6484/D6484M-20, Standard Test for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates. West Conshohocken, PA, USA, 2020.
  •  
  • 14. Wisnom, M., Hallett, S., and Soutis, C., “Scaling Effects in Notched Composites,” Journal of Composite Materials, Vol. 44, No. 2, 2010, pp. 195-210.
  •  
  • 15. Pinho, S., Darvizeh, R., Robinson, P., Schuecker, C., and Camanho, P., “Material and Structural Response of Polymer-matrix Fibre-reinforced Composites,” Journal of Composite Materials, Vol. 46, No. 19-20, 2012, pp. 2313-2341.
  •  
  • 16. Wanthal, S., Schaefer, J., Justusson, B., Hyder, I., Engelstad, S., and Rose, C., “Verification and Validation Process for Progressive Damage and Failure Analysis Methods in the NASA Advanced Composites Consortium,” Proceedings of the American Society for Composites (ASC) Technical Conference, USA, No. NF1676L-26362, 2017.
  •  
  • 17. Bergan, A.C., Murphy, S.J., and Miles, L.F., “Analysis of Open Hole Compression Specimens Using the CompDam Continuum Damage Mechanics Model,” NASA/TM–20205009618, 2020.
  •  

This Article

Correspondence to

  • Hong-Kyu Jang*, Ji Hoon Kim**

  • * Department of Composite Structure & System, Korea Institute of Materials Science
    ** Department of Mechanical Engineering, Pusan National Universit

  • E-mail: hongkyu@kims.re.kr, kimjh@pusan.ac.kr