Original Article
  • Fabrication and Evaluation of the Al-STS-Cu Functionally Graded Materials

  • Kwangjae Park*, Dasom Kim*, Hansang Kwon*†

  • * Department of Advanced Material Engineering, Pukyong National University, Busan 48547, Korea

  • 알루미늄-스테인레스스틸-구리 경사기능재료의 제조 및 특성평가

  • 박광재*· 김다솜*· 권한상*†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Al-Ghamdi, K.A., and Hussain, G., “SPIF of Cu/steel Clad Sheet: Annealing Effect on Bond Force and Formability,” Materials and Manufacturing Processes, Vol. 31, No. 6, 2016, pp. 758-763.
  •  
  • 2. Manesh, H.D., and Taheri, A.K., “Bond Strength and Formability of an Aluminum-clad Steel Sheet,” Journal of Alloys and Compounds, Vol. 361, No. 1-2, 2003, pp. 138-143.
  •  
  • 3. Park, K., Park, J., and Kwon, H., “Fabrication and Characterization of Al-SUS316L Composite Materials Manufactured by the Spark Plasma Sintering Process,” Materials Science and Engineering A, Vol. 691, No. 13, 2017, pp. 8-15.
  •  
  • 4. Park, K., Kim, D., Park, J., Cho, S., Takamichi, M., and Kwon, H., “Intermetallic Compounds in Al-SUS316L Composites,” Advanced Engineering Materials, Vol. 20, No. 10, 2018, pp. 1-6.
  •  
  • 5. Kwon, H., Estili, M., Takagi, K., Miyazaki, T., and Kawasaki, A., “Combination of Hot Extrusion and Spark Plasma Sintering for Producing Carbon Nanotube Reinforced Aluminum Matrix Composites,” Carbon, Vol. 47, No. 3, 2009, pp. 570-577.
  •  
  • 6. Park, K., Kim, D., Kim, K., and Kwon, H., “Aluminum /Stainless Steel Clad Materials Fabricated via Spark Plasma Sintering” Materials, Vol. 13, No. 1, 2020, p. 239.
  •  
  • 7. UKEssays., “Thermomechanical Analysis (TMA) Instrumentation.” ukessays.com., November 2018. Web. 23 June 2023..
  •  

This Article

Correspondence to

  • Hansang Kwon

  • * Department of Advanced Material Engineering, Pukyong National University, Busan 48547, Korea

  • E-mail: kwon13@pknu.ac.kr