Special Issue
  • Molding Quality Evaluation on Composite Laminate Panel for Railway Vehicle through Cure Monitoring using FBG Sensors

  • Juyeop Park*, ***, Donghoon Kang**†

  • * Researcher, Railroad Accident Research Team, Korea Railroad Research Institute
    ** Principle Researcher, Railroad Accident Research Team, Korea Railroad Research Institute
    *** M.S. Course, Dept. of Mechanical Engineering, Hanyang University

  • 광섬유 FBG 센서기반 성형 모니터링을 통한 철도 차량용 복합재 내장재 패널의 성형 품질 평가

  • 박주엽*, *** · 강동훈**†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Koo, J.S., Cho, H.J., and Han, H.S., “A Study on Structural Analysis of An Aluminum Bodyshell with A Modular Front End Made of Composite Materials,” Jounal of Korean Society for Railway, Vol. 6, No. 4, 2003, pp. 273-278.
  •  
  • 2. Cuartero, J., Miravete, A., and Sanz, R., “Design and Calculation of a Railway Car Composite Roof under Concrete Cube Crash,” International Journal of Crashworthiness, Vol. 16, No. 1, 2011, pp. 41-47.
  •  
  • 3. Kim, J.S., Lee, S.J., and Shin, K.B., “Manufacturing and Structural Safety Evaluation of a Composite Train Carbody,” Composite Structures, Vol. 78, No. 4, pp. 468-476.
  •  
  • 4. Lee, W.G., Kim, J.S., Yoon, H.J., Shin, K.B., and Seo, S.I., “Structural Behavior Evaluation of T-joints of the Composite Bogie Frame under Bending,” International Journal of Precision Engineering and Manufacturing, Vol. 14, No. 1, pp. 129-135.
  •  
  • 5. Park, J., and Kang, D., “Evaluation of Operational Durability of Heatable Composite Laminate Panel Used as Interior Material in Railway Vehicle,” Journal of the Korean Society for Nondestructive Testing, Vol. 43, No. 1, 2023, pp. 52-59.
  •  
  • 6. Jang, H.-J., Shin, K.B., Ko, H.-Y., and Ko, T.-H., “A Study on the Standardized Finite Element Models for Carbody Structures of Railway Vehicle Made of Sandwich Composites,” Jounal of Korean Society for Railway, Vol. 13, No. 4, 2010, pp. 382-388.
  •  
  • 7. Kim, H., Kang, D., Kim, M., and Jung, M.H., “Microwave Curing Characteristics of CFRP Composite Depending on Thickness Variation Using FBG Temperature Sensors,” Materials, Vol. 13, 2020, 1720.
  •  
  • 8. Kang, H.-K., Kang, D.-H., Bang, H.-J., Hong, C.-S., and Kim, C.-G., “Cure Monitoring of Composite Laminates Using Fiber Optic Sensors,” Journal of the Korean Society for Aeronautical & Space Sciences, Vol. 30, No. 2, 2002, pp. 59-66.
  •  
  • 9. Kim, J.-B., and Kim, T.-W., “Permittivities of the E-Glass Fabric/ Epoxy Composite Laminates Containing Carbon Black Dispersion,” Composite Research, Vol. 16, No. 2, 2003, pp. 48-53.
  •  
  • 10. Park, J., and Kang, D., “Cure Monitoring of Composites using Fiber Optic Sensors to Evaluate the Molding Quality of Resin Infusion Method using Heating Mold,” Journal of the Korean Society for Nondestructive Testing, Vol. 42, No. 5, 2022, pp. 394-402.
  •  
  • 11. Lee, K.-H., Ahn, B.-J., and Kim, D.-H. “Fiber Optic Displacement Sensor System for Structural Health Monitoring,” Journal of Korean Society for Nondestructive Testing, Vol. 31, No. 4, 2011, pp. 374-381.
  •  
  • 12. Lah, D.S., Yeh, Y.H., Lee, D.-Y., and Park, K.-S., “Multiplexed Fabry - Perot Interferometric Sensor System,” Journal Optical Society of Korea-Korean Edition, Vol. 10, No. 4, 1999, pp. 273-278.
  •  
  • 13. Hwang, S., Kim, T.-H., and Kim, D.H., “FBG Bending Sensors Using Fiber Optic Heat Shrink Sleeve,” Journal of the Korean Society for Nondestructive Testing, Vol. 40, No. 4, 2020, pp. 251-258.
  •  
  • 14. Kim, H., and Kang, D., “Evaluation of Microwave Power Effect on Composites Using Fiber Bragg Grating Sensor,” Journal of the Korean Society for Nondestructive Testing, Vol. 37, No. 4, 2017, pp. 249-256.
  •  
  • 15. Kim, H., and Kang, D., “Analysis of Effects of Curing Time Change on Residual Strain of Composites in Microwave Curing,” Transactions of the Korean Society of Mechanical Engineers A, Vol. 42, No. 7, 2018, pp. 649-655.
  •  

This Article

Correspondence to

  • Donghoon Kang

  • Principle Researcher, Railroad Accident Research Team, Korea Railroad Research Institute

  • E-mail: dhkang@krri.re.kr