Original Article
  • A Study on Increased Properties of Cellulose-Based Biodegradable Polymer Composites

  • Sangjun Hong*, Ajeong Lee*, Sanghyeon Ju*, Youngeun Shin*, Teahoon Park*†

  • Composites Research Division, Korea Institute of Materials Science (KIMS), South Korea

  • 셀룰로오스 기반 생분해성 고분자 복합재의 물성 증가에 관한 연구

  • 홍상준* · 이아정* · 주상현* · 신영은* · 박태훈*†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Torkashvand, J., Emamjomeh, M.M., Gholami, M., and Farzadkia, M., “Analysis of Cost-benefit in Life-cycle of Plastic Solid Waste: Combining Waste Flow Analysis and Life Cycle Cost as a Decision Support Tool to the Selection of Optimum Scenario,” Environment, Development and Sustainability, Vol. 23, No. 9, 2021, pp. 13242–13260.
  •  
  • 2. Li, B.-H., and Yang, M.-C., “Improvement of Thermal and Mechanical Properties of Poly(l-lactic acid) with 4,4-methylene Diphenyl Diisocyanate,” Polymers for Advanced Technologies, Vol. 17, No. 6, 2006, pp. 439–443.
  •  
  • 3. Sinha Ray, S., Yamada, K., Okamoto, M., Ogami, A., and Ueda, K., “New Polylactide/layered Silicate Nanocomposites. 3. High-performance Biodegradable Materials,” Chemistry of Materials, Vol. 15, No. 7, 2003, pp. 1456–1465.
  •  
  • 4. Zhong, J., Zhang, L., Yu, J., Tan, T., and Zhang, X., “Studies of Different Kinds of Fiber Pretreating on the Properties of PLA/Sweet Sorghum Fiber Composites,” Journal of Applied Polymer Science, Vol. 117, No. 3, 2010, pp. 1385-1393.
  •  
  • 5. Garlotta, D., “A Literature Review of Poly(lactic acid),” Journal of Polymers and the Environment, Vol. 9, No. 2, 2001, pp. 63-84.
  •  
  • 6. Athanasiou, K., “Sterilization, Toxicity, Biocompatibility and Clinical Applications of Polylactic Acid/polyglycolic Acid Copolymers,” Biomaterials, Vol. 17, No. 2, 1996, pp. 93-102.
  •  
  • 7. Shi, Q.F., Mou, H.Y., Li, Q.Y., Wang, J.K., and Guo, W.H., “Influence of Heat Treatment on the Heat Distortion Temperature of Poly(lactic acid)/Bamboo Fiber/Talc Hybrid Biocomposites,” Journal of Applied Polymer Science, Vol. 123, No. 5, 2012, pp. 2828-2836.
  •  
  • 8. Kawamoto, N., Sakai, A., Horikoshi, T., Urushihara, T., and Tobita, E., “Physical and Mechanical Properties of Poly(l-lactic acid) Nucleated by Dibenzoylhydrazide Compound,” Journal of Applied Polymer Science, Vol. 103, No. 1, 2007, pp. 244–250.
  •  
  • 9. Aguero, A., Morcillo Md, C., Quiles-Carrillo, L., Balart, R., Boronat, T., Lascano, D., Torres-Giner, S., and Fenollar, O., “Study of the Influence of the Reprocessing Cycles on the Final Properties of Polylactide Pieces Obtained by Injection Molding,” Polymers, Vol. 11, No. 12, 2019, 1908.
  •  
  • 10. Ren, Q., Wu, M., Wang, L., Zheng, W., Hikima, Y., Semba, T., and Ohshima, M., “Light and Strong Poly(lactic acid)/cellulose Nanofiber Nanocomposite Foams with Enhanced Rheological and Crystallization Property,” The Journal of Supercritical Fluids, Vol. 190, 2022, 105758.
  •  
  • 11. Srithep, Y., Nealey, P., and Turng, L.S., “Effects of Annealing Time and Temperature on the Crystallinity and Heat Resistance Behavior of Injection-molded Poly(lactic acid),” Polymer Engineering & Science, Vol. 53, No. 3, 2013, pp. 580-588.
  •  
  • 12. Khuenkeao, T., Petchwattana, N., and Covavisaruch, S., “Thermal and Mechanical Properties of Bioplastic Poly(lactic acid) Compounded with Silicone Rubber and Talc,” AIP Conference Proceedings, Vol. 1713, 2016.
  •  
  • 13. Lee, G., Lee, H.M., and Kim, Y.H., “Thermal and Mechanical Properties of Poly(L-lactic Acid) Films Plasticized with Propylene Carbonate,” Polymer(Korea), Vol. 43, No. 1, 2019, pp. 113-122.
  •  
  • 14. Gan, P.G., Sam, S.T., Abdullah, M.F., and Omar, M.F., “Thermal Properties of Nanocellulose‐reinforced Composites: A Review,” Journal of Applied Polymer Science, 2019, Vol. 137, No. 11, 2020, pp. 48544.
  •  
  • 15. Qian, S., and Sheng, K., “PLA Toughened by Bamboo Cellulose Nanowhiskers: Role of Silane Compatibilization on the PLA Bionanocomposite Properties,” Composites Science and Technology, Vol. 148, 2017, pp. 59-69.
  •  

This Article

Correspondence to

  • Teahoon Park

  • Composites Research Division, Korea Institute of Materials Science (KIMS), South Korea

  • E-mail: thpark@kims.re.kr