Original Article
  • Multi-scale Progressive Fatigue Damage Model for Unidirectional Laminates with the Effect of Interfacial Debonding

  • Dongwon Ha*, Jeong Hwan Kim*, Taeri Kim*, Young Sik Joo**, Gun Jin Yun***†

  • * Department of Aerospace Engineering, Seoul National University, Seoul, Korea
    ** Aerospace Technology Research Institute, Agency for Defense Development
    *** Institute of Advanced Aerospace Technology, Seoul National University, Seoul, Korea

  • 경계면 손상을 고려한 적층복합재료에 대한 멀티스케일 피로 손상 모델

  • 하동원*·김정환*·김태리*·주영식** ·윤군진***†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Hashin, Z., and Rotem, A., “A Fatigue Failure Criterion for Fiber Reinforced Materials,” Journal of Composite Materials, Vol. 7, No. 4, 1973, pp. 448-464.
  •  
  • 2. Reifsnider, K., and Gao, Z., “A Micromechanics Model for Composites under Fatigue Loading,” International Journal of Fatigue, Vol. 13, No. 2, 1991, pp. 149-156.
  •  
  • 3. Mori, T., and Tanaka, K., “Average Stress in Matrix and Average Elastic Energy of Materials with Misfitting Inclusions,” Acta Metallurgica, Vol. 21, No. 5, 1973, pp. 571-574.
  •  
  • 4. Jen, M.-H., and Lee, C.-H., “Strength and Life in Thermoplastic Composite Laminates under Static and Fatigue Loads. Part I: Experimental,” International Journal of Fatigue, Vol. 20, No. 9, 1998, pp. 605-615.
  •  
  • 5. Whitworth, H.A., “A Stiffness Degradation Model for Composite Laminates under Fatigue Loading,” Composite Structures, Vol. 40, No. 2, 1997, pp. 95-101.
  •  
  • 6. Yao, W.X., and Himmel, N., “A New Cumulative Fatigue Damage Model for Fibre-reinforced Plastics,” Composites Science and Technology, Vol. 60, No. 1, 2000, pp. 59-64.
  •  
  • 7. Khan, Z., Al-Sulaiman, F.A., Farooqi, J.K., and Younas, M., “Fatigue Life Predictions in Woven Carbon Fabric/polyester Composites Based on Modulus Degradation,” Journal of Reinforced Plastics and Composites, Vol. 20, No. 5, 2001, pp. 377-398.
  •  
  • 8. Shokrieh, M.M., and Lessard, L.B., “Progressive Fatigue Damage Modeling of Composite Materials, Part I: Modeling,” Journal of Composite Materials, Vol. 34, No. 13, 2000, pp. 1056-1080.
  •  
  • 9. Shokrieh, M.M., and Lessard, L.B., “Progressive Fatigue Damage Modeling of Composite Materials, Part II: Material Characterization and Model Verification,” Journal of Composite Materials, Vol. 34, No. 13, 2000, pp. 1081-1116.
  •  
  • 10. Papanikos, P., Tserpes, K., and Pantelakis, S., “Modelling of Fatigue Damage Progression and Life of CFRP Laminates,” Fatigue & Fracture of Engineering Materials & Structures, Vol. 26, No. 1, 2003, pp. 37-47.
  •  
  • 11. Ye, L., “Role of Matrix Resin in Delamination Onset and Growth in Composite Laminates,” Composites Science and Technology, Vol. 33, No. 4, 1988, pp. 257-277.
  •  
  • 12. Hashin, Z., “Failure Criteria for Unidirectional Fiber Composites”, 1980.
  •  
  • 13. Kennedy, C.R., Brádaigh, C.M.Ó., and Leen, S.B., “A Multiaxial Fatigue Damage Model for Fibre Reinforced Polymer Composites,” Composite Structures, Vol. 106, 2013, pp. 201-210.
  •  
  • 14. Zhang, L., Qiu, R., Cheng, J., and Liu, B., “Experimental Investigation and Multiscale Simulation on the Bending Fatigue of 2D SiCf /SiC Composites,” International Journal of Fatigue, Vol. 144, 2021, pp. 106051.
  •  
  • 15. Sayyidmousavi, A., Bougherara, H., and Fawaz, Z., “A Multiscale Approach for Fatigue Life Prediction of Polymer Matrix Composite Laminates,” Journal of Reinforced Plastics and Composites, Vol. 34, No. 13, 2015, pp. 1099-1109.
  •  
  • 16. Tamboura, S., Ayari, H., Shirinbayan, M., and Laribi, M.A., “Experimental and Numerical Multi-scale Approach for Sheet-Molding-Compound Composites Fatigue Prediction Based on Fiber-matrix Interface Cyclic Damage,” International Journal of Fatigue, Vol. 135, 2020, pp. 105526.
  •  
  • 17. Lee, H.-K., and Pyo, S., “3D-damage Model for Fiber-reinforced Brittle Composites with Microcracks and Imperfect Interfaces,” Journal of Engineering Mechanics, Vol. 135, No. 10, 2009, pp. 1108-1118.
  •  
  • 18. Ju, J., and Lee, H.-K., “A Micromechanical Damage Model for Effective Elastoplastic Behavior of Ductile Matrix Composites Considering Evolutionary Complete Particle Debonding,” Computer Methods in Applied Mechanics and Engineering, Vol. 183, No. 3-4, 2000, pp. 201-222.
  •  
  • 19. Eshelby, J.D., “The Determination of the Elastic Field of an Ellipsoidal Inclusion, and Related Problems”, Proceedings of the royal Society of London. Series A. Mathematical and Physical Sciences, Vol. 241, No. 1226, 1957, pp. 376-396.
  •  
  • 20. Mura, T., “Micromechanics of Defects in Solids”, Springer Science & Business Media, 2013.
  •  
  • 21. Murakami, S., “Mechanical Modeling of Material Damage,” Journal of Applied Mechanics, Vol. 55, 1988, pp. 280-286.
  •  
  • 22. Lee, S., Kim, Y., Lee, J., and Ryu, S., “Applicability of the Interface Spring Model for Micromechanical Analyses with Interfacial Imperfections to Predict the Modified Exterior Eshelby Tensor and Effective Modulus,” Mathematics and Mechanics of Solids, Vol. 24, No. 9, 2019, pp. 2944-2960.
  •  
  • 23. Lee, S., Lee, J., and Ryu, S., “Modified Eshelby Tensor for an Anisotropic Matrix with Interfacial Damage,” Mathematics and Mechanics of Solids, Vol. 24, No. 6, 2019, pp. 1749-1762.
  •  
  • 24. Mohammadi, B., Fazlali, B., and Salimi-Majd, D., “Development of a Continuum Damage Model for Fatigue Life Prediction of Laminated Composites,” Composites Part A: Applied Science and Manufacturing, Vol. 93, No. 2017, pp. 163-176.
  •  
  • 25. Kaddour, A.S., Hinton, M.J., and Smith, P.A., “Mechanical Properties and Details of Composite Laminates for the Test Cases Used in the Third World-wide Failure Exercise,” Journal of Composite Materials, Vol. 47, No. 20-21, 2013, pp. 2427-2442.
  •  
  • 26. Gandomi, A.H., Yang, X.S., Talatahari, S., and Alavi, A.H., “Firefly Algorithm with Chaos,” Communications in Nonlinear Science and Numerical Simulation, Vol. 18, No. 1, 2013, pp. 89-98.
  •  

This Article

Correspondence to

  • Gun Jin Yun

  • Institute of Advanced Aerospace Technology, Seoul National University, Seoul, Korea

  • E-mail: gunjin.yun@snu.ac.kr