Original Article
  • Mechanical Characteristics of 3-dimensional Woven Composite Stiffened Panel

  • Jae-Hyeong Jeong*, So-Mang Hong*, Joon-Hyung Byun**, Young-Woo Nam*, Jin-Hwe Kweon*†

  • * School of Mechanical and Aerospace Engineering, Gyeongsang National University
    ** Composite Research Division, Korea Institute of Materials Science

  • 3차원으로 직조된 복합재 보강 패널의 기계적 특성 연구

  • 정재형*· 홍소망*· 변준형**· 남영우*· 권진회*†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. SudhirSastry, Y.B., Budarapu, P.R., Madhavi N., and Krishna, Y., “Buckling Analysis of Thin Wall Stiffened Composite Panels,” Computational Materials Science, Vol. 96, 2015, pp. 459-471.
  •  
  • 2. Ghavami, K., and Khedmati, M.R., “Numerical and Experimental Investigations on the Compression Behaviour of Stiffened Plates,” Journal of Constructional Steel Research, Vol. 62, No. 11, 2006, pp. 1087-1100.
  •  
  • 3. Henning, F., Kärger, L., Dörr, D., Schirmaier, F.J., Seuffert, J., and Bernath, A., “Fast Processing and Continuous Simulation of Automotive Structural Composite Components,” Composites Science and Technology, Vol. 171, 2019, pp. 261-279.
  •  
  • 4. Lee, J.M., Lee, C.J., Kim, B.M., and Ko, D.C., “Design of Prepreg Compression Molding for Manufacturing of CFRTP B-Pillar Reinforcement with Equivalent Mechanical Properties to Existing Steel Part,” International Journal of Precision Engineering and Manufacturing, Vol. 21, No. 3, 2019, pp. 545-556.
  •  
  • 5. Vieille, B., Albouy, W., Chevalier, L., and Taleb, L., “About the Influence of Stamping on Thermoplastic-Based Composites for Aeronautical Applications,” Composites Part B: Engineering, Vol. 45, No. 1, 2013, pp. 821-834.
  •  
  • 6. Suemasu, H., Friedrich, K., and Hou, M., “On Deformation of Woven Fabric-Reinforced Thermoplastic Composites during Stamp-Forming,” Composites Manufacturing, Vol. 5, No. 1, 1994, pp. 31-39.
  •  
  • 7. Trudel-Boucher, D., Fisa, B., Denault, J., and Gagnon, P., “Experimental Investigation of Stamp Forming of Unconsolidated Ccommingled E-glass/polypropylene Fabrics,” Composites Science and Technology, Vol. 66, 2006, pp. 555-570.
  •  
  • 8. Lebrun, G., Bureau, M.N., and Denault, J., “Thermoforming-Stamping of Continuous Glass Fiber/Polypropylene Composites: Interlaminar and Tool-Laminate Shear Properties,” Journal of Thermoplastic Composite Materials, Vol. 17, No. 2, 2004, pp. 137-165.
  •  
  • 9. Ning, H., Vaidya, U., Janowski, G.M., and Husman, G., “Design, Manufacture and Analysis of a Thermoplastic Composite Frame Structure for Mass Transit,” Composite Structures, Vol. 80, No. 1, 2007, pp. 105-116.
  •  
  • 10. Noh, J.S., Gim, Y.T., Shin, J.H., Kwon, B.S., Byun, J.H., Nam, Y.W., and Kweon, J.H., “Buckling Characteristics of Skin-Stringer Composite Stiffened Panel”, Journal of Aerospace System Engineering, Vol. 14, No. 6, 2020, pp. 68-73.
  •  
  • 11. Ucsnik, S., Scheerer, M., Zaremba, S., and Pahr, D.H., “Experimental Investigation of a Novel Hybrid Metal-Composite Joining Technology,” Composites Part A: Applied Science and Manufacruring, Vol. 41, No. 3, 2010, pp. 369-374.
  •  
  • 12. Park, S.M., Roy, R., Kweon, J.H., and Nam, Y.W., “Strength and Failure Modes of Surface Treated CFRP Secondary Bonded Single-Lap Joints in Static and Fatigue Tensile Loading Rregimes”, Composites Part A: Applied Science and Manufacruring, Vol. 134, 2020, pp. 105897.
  •  
  • 13. Hivet, G., and Boisse, P., “Consistent 3D Geometrical Model of Fabric Elementary Cell. Application to a Meshing Preprocessor for 3D Finite Element Analysis,” Finite Elements in Analysis and Design Vol. 42, 2005, pp. 25-49.
  •  
  • 14. Fukuta, K., Miyashita, R., Sekiguti, J., Nagatsuka, Y., Tsuburaya, S., Aoki, E., and Sasahara, M., “Three-dimensional Fabric, and Method and Loom Construction for the Production Thereof”, US Patent No. 3834424, 1974.
  •  
  • 15. Soden, J.A., and Hill, B.J., “Conventional Weaving of Shaped Preforms for Engineering Composites,” Composites Part A: Applied Science and Manufacturing, Vol. 29, No. 7, 1998, pp. 757-762.
  •  
  • 16. Thomson, R.S., Falron, P.J., Nicolaidis, A., Leong, K.H., and Ishikawa, T., “The Bending Properties of Integrally Woven and Unidirectional Prepreg T-Sections,” Composite Sturctures, Vol. 47, 1999, pp. 781-787.
  •  
  • 17. Fu, X., Ricci, S., and Bisagni, C., “Minimum-Weight Design for Three Dimensional Woven Composite Stiffened Panels Using Neural Networks and Genetic Algorithms,” Composite Structures, Vol. 134, 2015, pp. 708-715.
  •  
  • 18. Mountasir, A., Hoffmann, G., and Cherif, C., “Development of Multilayered Woven Panels with Integrated Stiffeners in the Transverse and Longitudinal Directions for Thermoplastic Lightweight Applications,” Textile Research Journal, Vol. 83, No. 14, 2013, pp. 1532-1540.
  •  
  • 19. Perret, A., Mistou, S., Fazzini, M., and Brault, R., “Global behaviour of a Composite Stiffened Panel in Buckling. Part 2: Experimental Investigation,” Composite Structures, Vol. 94, No. 2, 2012, pp. 376-385.
  •  
  • 20. Yan, S., Zeng, X., Brown, L., and Long, A., “Geometric Modeling of 3D Woven Preforms in Composite T-joints” Textile Research Journal, Vol. 88, No. 16, 2018, pp. 1862-1875.
  •  
  • 21. Song, W., Fan, W., Liu, T., Chen, X., Wang, S., Zhao, Y., Song, C., Mi, P., Dou, H., and Gao, X., “Flexural Fatigue Properties and Failure Propagation of 3D Stitched Composites under 3-Point Bending Loading,” International Journal of Fatigue, Vol. 153, 2021, pp. 106507.
  •  
  • 22. Lionetto, F., Moscatello, A., Totaro, G., Raffone, M., and Maffezzoli, A., “Experimental and Numerical Study of Vacuum Resin Infusion of Stiffened Carbon Fiber Reinforced Panels”, Materials, Vol. 13, 2020 pp. 4800.
  •  
  • 23. Mountasir, A., Hoffmann, G., Cherif, Ch., Loser, M., and Muhl, A., “Performance of Multi-Layered Woven Panels with Integrated Stiffeners for Lightweight Engineering”, 13th AUTEX world Textile Conference, Dresden, Germany, May, 2013, pp. 1-6.
  •  
  • 24. Ma, Z., Zhang, P., and Zhu, J., “Review on the Fatigue Properties of 3D Woven Fiber/Epoxy Composites: Testing and Modelling Strategies”, Journal of Industrial Textiles, Vol. 51, 2020, pp. 7755S-7795S.
  •  
  • 25. McClain, M., and Goering, J., “Rapid Assembly of Fiber Preforms Using 3D Woven Components”, SAMPE Journal, Vol. 49, 2013, pp. 24-28.
  •  
  • 26. Zhou, G., Pan, R., Li, C., Cai, D., and Wang, X., “Compressive Behavior of 3D Woven Composite Stiffened Panels: Experimental and Numerical Study,” Applied Composite Materials, Vol. 24, 2017, pp. 771-785.
  •  
  • 27. Field, E.I., Herting, D.N., and Morgan, M.J., NASTRAN user's guide (Level 17.5) (No. NASA-CR-3146). NASA, 1979.
  •  
  • 28. Jones, R.M., “Mechanics of Composite Materials,” McGraw-Hill, 1999.
  •  

This Article

Correspondence to

  • Jin-Hwe Kweon

  • * School of Mechanical and Aerospace Engineering, Gyeongsang National University

  • E-mail: jhkweon@gnu.ac.kr