Original Article
  • Analysis of the Physical Properties of the Conductive Paste according to the Type of Binder Resin and Simulation of Mechanical Properties according to Ag Flake Volume Fraction

  • Ji-Hyun Sim*, Hyeon-Seong Yun**, Seong-Hun Yu**, Jong-Su Park***, Seong-Min Jeon***, Jin-Seok Bae*†

  • * Department of Texitile System Enginnering, Kyungpook National University, Daegu, Korea
    ** DYETEC, Computer Aided Engineering(CAE) Center, Daegu, Korea
    *** Pyung Hwa Industrials Co., Ltd, Korea

  • 바인더 수지 종류에 따른 도전성 페이스트의 물성 분석 및 Ag flake 부피 분율에 따른 기계적 특성 시뮬레이션 연구

  • 심지현*· 윤현성**· 유성훈**· 박종수***· 전성민***· 배진석*†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Kim, S.Y., Noh, Y.J., Jang, J., and Choi, S.K., “Conductive Properties of Thermoplastic Carbon Fiber Reinforced Plastics Highly Filled with Carbon Fiber Fabrics and Conductive Carbon Fillers,” Composite Research, Vol. 34, 2021, pp. 290-295.
  •  
  • 2. Bae, S.-Y., Bae, K.-M., and Kim, Y.-H., “Evaluation of Mechanical and Vibration Characteristics of Laminated Damping Aluminum Panel for Automobile Components,” Composite Research, Vol. 32, 2019, pp. 113-119.
  •  
  • 3. Ko, K.H., Lee, M.G., Huh, M., “Development of the CFRP Automobile Parts Using the Joint Structure of the Dissimilar Material,” Composite Research, Vol. 31, 2018, pp. 392-397.
  •  
  • 4. Zhang, Z., Chen, C., Suetake, A., Hsieh, M.-C., Iwaki, A., and Suganuma, K., “Pressureless and Low-temperature Sinter-joining on Bare Si, SiC and GaN by a Ag Flake Paste,” Scripta Materialia, Vol. 198, 2021, pp. 228-235.
  •  
  • 5. Lee, C.-J., Jung, K.-H., Min, K.D., Park, B.-G., and Jung, S.-B., “Fabrication and Characterization of Ag Flake Hybrid Circuits with IPL-sintering,” Journal of Materials Science & Technology, Vol. 53, 2020, pp. 13-18.
  •  
  • 6. Park, B.-G., Jung, K.-H., and Jung, S.-B., “Fabrication of the Hybrid Ag Paste Combined by Ag Nanoparticle and Micro Ag Flake and Its Flexibility,” Journal of Alloys and Compounds, Vol. 699, 2017, pp. 1186-1191.
  •  
  • 7. Park, J.Y., Lee, W.J., Kwon, B.-S., Nam, S.-Y., and Choa, S.-H., “Highly Stretchable and Conductive Conductors Based on Ag Flakes and Polyester Composites,” Microelectronic Engineering, Vol. 199, 2018, pp.16-23.
  •  
  • 8. Park, M.J., Park, K., and Ko, H., “Near-infrared Photodetector Achieved by Chemically-exfoliated Multilayered MoS2 Flakes,” Applied Surface Science, Vol. 448, 2018, pp. 64-70.
  •  
  • 9. Li, S., Lv, Y., Sheng, J., Tian, H., and Tian, M., “Morphology Development of POE/PP Thermoplastic Vulcanizates (TPVs) during Dynamic Vulcanization,” European Polymer Journal, Vol. 93, 2017, pp. 590-601.
  •  
  • 10. Mir, A., Singh, D.K., and Shukla, A., “Size Distribution of Trilayer Graphene Flakes Obtained by Electrochemical Exfoliation of Graphite: Effect of the Synthesis Parameters,” Materials Chemistry and Physics, Vol. 220, 2018, pp. 87-97.
  •  
  • 11. Miyaji, M., and Nonaka, K., “Effects of Altering Total Mixed Ration Conservation Method when Feeding Dry-rolled Versus Steam-flaked Hulled Rice on Lactation and Digestion in Dairy Cows,” Journal of Dairy Science, Vol. 101, 2018, pp. 5092-5101.
  •  
  • 12. Park, S.W., Son, J.H., Sim, S.B., Choi, Y.B., and Bae, D.S., “Fabrication and Characterization of Silver Copper(I) Oxide Nanoparticles for a Conductive Paste,” Materials Research Society of Korea, Vol. 29, 2019, pp. 37-42.
  •  
  • 13. Kim, G., Jung, K.-M., Moon, J.-T., and Lee, J.-H., “Electrical Resistivity and Thermal Conductivity of Paste Containing Ag-coated Cu Flake Filler,” The Korean Microelectronics and Packaging Society, Vol. 21, 2014, pp. 51-56.
  •  
  • 14. Khonakdar, H.A., Jafari, S.H., and Hesabi, M.-N., “Miscibility Analysis, Viscoelastic Properties and Morphology of Cyclic Olefin Copolymer/polyolefin Elastomer(COC/POE) Blends,” Composites Part B: Engineering, Vol. 69, 2015, pp. 111-119.
  •  
  • 15. Alanalp, M.B., and Durmus, A., “Quantifying Microstructural, Thermal, Mechanical and Solid-state Viscoelastic Properties of Polyolefin Blend Type Thermoplastic Elastomer Compounds,” Polymer, Vol. 142, 2018, pp. 267-276.
  •  
  • 16. Li, M., Chang, K., Zhong, W., Xiang, C., Wang, W., Liu, Q., Liu, K., Wang, Y., Lu, Z., and Wang, D., “A Highly Stretchable, Breathable and Thermoregulatory Electronic Skin Based on the Polyolefin Elastomer Nanofiber Membrane,” Applied Surface Science, Vol. 486, 2019, pp. 249-256.
  •  
  • 17. Ramkumar, P.L., Kulkarni, D.M., Abhijit, V.V.R., and Cherukumudi, A., “Investigation of Melt FlowIndex and Impact Strength of Foamed LLDPE for Rotational Moulding Process,” Procedia Materials Science, Vol. 6, 2014, pp. 361-367.
  •  
  • 18. Kwon, D.-J., Shin, P.-S., Kim, J.-H., and Park, J.-M., “A New Mixing Method of SiC Nanoparticle Reinforced Epoxy Composites with Large Concentration of SiC Nanoparticle,” Compostite Research, Vol. 29, 2016, pp. 223-229.
  •  
  • 19. Han, D.-H., and Ha, S.K., “Development of Lightweight Composite Sub-frame in Automotive Chassis Parts Considering Structure & NVH Performance,” Composite Research, Vol. 32, 2019, pp. 21-28.
  •  
  • 20. Kwak, S.-B., Choi, N.-S., and Lim, Y.-H., “Durability Test and Micro-Damage Formation of Rubber Hose for Automotive Hydraulic Brake,” Composite Research, Vol. 21, 2008, pp. 40-45.
  •  
  • 21. Chae, K.-C., Jo, S.-H., and Kim, E.-G., “3-Dimensional Deformation Analysis for Compression Molding of Polymeric Composites with Random/Unidirectional Fiber-Reinforced Laminates,” Composite Research, Vol. 12, 1999, pp. 23-30.
  •  
  • 22. Son, D.I., So, S., Hwang, H., Choi, D.H., Choi, W.G., Kim, S.K., and Kim, D.I., “A Study on the Bonding Strength Analysis according to the Surface Treatment Characteristics of Aluminum Bar-cowl Cross Member of Composite Material Injection Insert,” Composite Research, Vol. 33, 2020, pp. 360-364.
  •  
  • 23. Park, G.-T., Lee, D.-W., Byun, J.-H., and Song, J.-I., “Development of 3D Woven Preform π-beam based on T-beam Made of Laminated Composites,” Composite Research, Vol. 33, 2020, pp. 115-124.
  •  
  • 24. Park, B.-J., Lee, D.-W., and Song, J.-I., “Development of Low-Velocity Impact Analysis Model of Carbon-Steel Laminates through Finite Element Analysis,” Composite Research, Vol. 31, 2018, pp. 215-220.
  •  
  • 25. Zhang, Y., Sun, L., and Zhang, K.L.Y., “One-pot Synthesis of Ni(OH)2 Flakes Embeded in Highly-conductive Carbon Nanotube/graphene Hybrid Framework as High Performance Electrodes for Supercapacitors,” Materials Letters, Vol. 213, 2018, pp. 131-134.
  •  

This Article

Correspondence to

  • Jin-Seok Bae

  • Department of Texitile System Enginnering, Kyungpook National University, Daegu, Korea

  • E-mail: enviro1234@dyetec.or.kr