Original Article
  • Optimal Structural Design Framework of Composite Rotor Blades Using PSGA
  • Joon-Hyek Ahn*, Jae-Seong Bae*, Sung Nam Jung**†

  • * Department of Aerospace Information Engineering, Konkuk University
    ** Department of Mechanical and Aerospace Engineering, Konkuk University

  • PSGA를 이용한 복합재료 블레이드의 최적 구조설계 프레임워크 개발 연구
  • 안준혁*· 배재성*· 정성남**†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Rehfield, L., Atilgan, A., and Hodges, D., “Nonclassical Behavior of Thin-Walled Composite Beams with Closed Cross Sections”, Journal of American Helicopter Society, Vol. 35, 1990, pp. 42-50.
  •  
  • 2. Friedmann, P.P., and Shanthakumaran, P., “Optimum Design of Rotor Blades for Vibration Reduction in Forward Flight”, Journal of the American Helicopter Society, Vol. 29, No. 4, 1984, pp. 70-80.
  •  
  • 3. Lim, J.W., and Chopra, I., “Aeroelastic Optimization of a Helicopter Rotor Using an Efficient Sensitivity Analysis”, Journal of Aircraft, Vol. 28, No. 1, 1991, pp. 29-37.
  •  
  • 4. Celi, R., and Friedmann, P.P., “Structural Optimization with Aeroelastic Constraints of Rotor Blades with Straight and Swept Tips”, AIAA Journal, Vol. 28, No. 5, 1990, pp. 928-936.
  •  
  • 5. Park, I.J., and Jung, S.N., “Structural Analysis of Thin-walled, Multi-celled Composite Blades with Elliptic Cross-sections”, Journal of the Korean Society for Composite Materials, Vol. 17, No. 4, 2004, pp. 25-31.
  •  
  • 6. Bae, J.S., and Jung, S.N., “Highly Efficient Structural Optimization of Composite Rotor Blades using Bezier Curves”, Journal of the Korean Society for Composite Materials, Vol. 33, No. 6, 2020, pp. 353-359.
  •  
  • 7. Cesnik, C.E.S., and Hodges, D.H., “VABS: A New Concept for composite Rotor Blade Cross-Sectional Modeling”, Journal of the American Helicopter Society, Vol. 42, No. 1, 1997, pp. 27-38.
  •  
  • 8. Ma, L., Zhao, Q., Zhang, K., Zhang, X., and Zhao, M., “Aeroelastic analysis and structural parametric design of composite rotor blade”, Chinese Journal of Aeronautics, Vol. 34, No. 1, 2021, pp. 336-349.
  •  
  • 9. Lee, J., and Hajela, P., “Parallel Genetic Algorithms Implementation in Multidisciplinary Rotor Blade Design”, Journal of Aircraft, Vol. 33, No. 5, 1996, pp. 962-969.
  •  
  • 10. Dhadwal, M.K., Jung, S.N., and Kim,C.J., “Advanced Particle Swarm Assisted Genetic Algorithm for Constrained Optimization Problems”, Computational Optimization and Applications, Vol. 58, 2014, pp. 781-806.
  •  
  • 11. Yu, Y.H., Tung, C., van der Wall, B.G., Pausder, H.J., Burley, C., Brooks, T., Beaumier, P., Delriuex, Y., Mercker, E., and Pengel, K., “The HART-II Test: Rotor Wakes and Aeroacoustics with Higher-Harmonic Pitch Control (HHC) Inputs—The Joint German/French/Dutch/US Project,” Proceedings of the 58th American Helicopter Society (AHS) Annual Forum, Montreal, Canada, June, 2002.
  •  
  • 12. Jung, S.N., You, Y.H., Dhuwal, M.K., Riemenschneider, J., and Hagerty, B.P., “Study on Blade Property Measurement and Its Influence on Air/Structural Loads”, AIAA Journal, Vol. 53, No. 11, 2015.
  •  
  • 13. Jung, S.N., Dhadwal, M.K., Kim, Y.W., Kim, J.H., and Riemenschneider, J., “Cross-sectional Constants of Composite Blades Using Computed Tomography Technique and Finite Element Analysis”, Composite Structures, Vol. 129, 2015, pp. 132-142.
  •  
  • 14. de Boor, C., “On Calculating with B-splines”, Journal of Approximation Theory, Vol. 6, No. 1, 1972, pp. 50-62.
  •  
  • 15. Bohm, W., Farin, G., and Kahmann, J., “A Survey of Curve and Surface Methods in CAGD”, Computer Aided Geometric Design, Vol. 1, No. 1, 1984, pp. 1-60.
  •  
  • 16. Dhadwal, M.K., Jung, S.N., and Kim, T.J., “Evolutionary Shape Optimization of Flexbeam Sections of a Bearingless Helicopter Rotor”, Journal of the Korean Society for Composite Materials, Vol. 27, No. 6, 2014, pp. 207-212.
  •  
  • 17. Geuzaine, C., and Remacle, J., “Gmsh: A 3‐D Finite Element Mesh Generator with Built‐in Pre‐ and Post‐processing Facilities,” International Journal for Numerical Methods In Engineering, Vol. 79, No. 11, 2009, pp. 1309-1331.
  •  
  • 18. Dhadwal, M.K., and Jung, S.N., “Refined Sectional Analysis with Shear Center Prediction for Nonhomogeneous Anisotropic Beams with Nonuniform Warping,” Meccanica, Vol. 51, 2016, pp. 1839-1867.
  •  
  • 19. Jung, S.N., Nagaraj, V.T., and Chopra, I., “Refined Structural Dynamics Model for Composite Rotor Blades,” AIAA Journal, Vol. 39, No. 2, 2001, pp. 339-348.
  •  
  • 20. Hwang, H.J., Ahn, J.H., Chang, S.H., Jung, S.N., Kalow, S., and Keimer, R., “Digital Twin Approach for Structural Property Evaluation of Next Generation Active Twist Blades”, Proceeding of the Vertical Flight Society’s 76th Annual Forum & Technology Display, Virginia Beach, Virginia, USA, Oct. 2020.
  •  
  • 21. Bogetti, T.A., Hoppel, C.P.R., and Drysdale, W.H., “Three-dimensional Effective Property and Strength Prediction of Thick Laminated Composite Media, Army Research Laboratory Technical Report 911, Oct., 1995.
  •  
  • 22. Kruger, R., and Minguet, P., “Analysis of Composite Panel-Stiffener Debonding Using a Shell/3D Modeling Technique”, Composite Structures, Vol. 81, 2007, pp. 41-59.
  •  

This Article

Correspondence to

  • Sung Nam Jung
  • Department of Mechanical and Aerospace Engineering, Konkuk University

  • E-mail: snjung@konkuk.ac.kr