Original Article
  • GF/PC Composite Filament Design & Optimization of 3D Printing Process and Structure for Manufacturing 3D Printed Electric Vehicle Battery Module Cover

  • Jeong-Wook Yoo*, Jin-Woo Lee*, Seung-Hyun Kim**, Youn-Chul Kim***, Jong-Hwan Suhr*, **†

  • * Department of Polymer Science and Engineering, Sungkyunkwan University
    ** School of Mechanical Engineering, Sungkyunkwan University
    *** School of Chemical Engineering, Sungkyunkwan University

  • 전기자동차 배터리 모듈 커버의 3D 프린팅 제작을 위한 GF/PC 복합소재 필라멘트 설계와 3D 프린팅 공정 및 구조 최적화

  • 유정욱* · 이진우* · 김승현** · 김윤철*** · 서종환*, **†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Zhang, X., Yamauchi, M., and Takahashi, J., “Life Cycle Assessment of CFRP in Application of Automobile,” Proceedings of the ICCM International Conferences on Composite Materials, Jeju Island, Korea, 2011.
  •  
  • 2. Walley, S.M., Field, J.E., Blair, P.W., and Milford, A.J., “The Effect of Temperature on the Impact Behaviour of Glass/Polycarbonate Laminates,” International Journal of Impact Engineering, Vol. 30, No. 1, 2004, pp. 31-53.
  •  
  • 3. Kim, N.-S.-R., Lee, E.-S., Kwon, D.-J., Yang, S.B., Lee, J.E., and Yeum, J.H., “Evaluation of Impregnating and Mechanical Properties for Glass Fiber/Polycarbonate Composites Depending on Molecular Weight of Matrix,” Composites Research, Vol. 34, No. 1, 2021, pp. 1-7.
  •  
  • 4. Günaydın, K., and Türkmen, H.S., “Common FDM 3D printing defects,” International Congress on 3D Printing (Additive Manufacturing) Technologies and Digital Industry, 2018.
  •  
  • 5. Baek, U.-G., Nam, G.B., Roh, J.-S., Park, S.-E., and Roh, J.-U., “A Study on the Improvement of Bending Characteristics of 3D Printed Thermoplastic Structures Reinforced at the Lateral Surface using Continuous Fiber Reinforced Thermosetting Composites,” Composites Research, Vol. 34, No. 2, 2021, pp. 136-142.
  •  
  • 6. Kim, E.S., Kim, Y.C., Park, J., Kim, Y., Kim, S.H., Kim, K.J., Suhr, J.H., Lee, Y.K., Lee, S.H., Kim, D.-S., Kim, S.-H., Yun, J.-H., Park, I.-K., and Nam, J.D., “Mechanical Properties and Flame Retardancy of Surface Modified Magnesium Oxysulfate (5Mg(OH)2·MgSO4·3H2O) Whisker for Polypropylene Composites,” Journal of Materiomics, Vol. 4, No. 2, 2018, pp. 149-156.
  •  
  • 7. Semba, T., Kitagawa, K., Ishiaku, U.S., Kotaki, M., and Hamada, H., “Effect of Compounding Procedure on Mechanical Properties and Dispersed Phase Morphology of Poly(lactic acid)/Polycaprolactone Blends Containing Peroxide,” Journal of Applied Polymer Science, Vol. 103, No. 2, 2007, pp. 1066-1074.
  •  
  • 8. Wickramasinghe, S., Truong, D., and Tran, P., “FDM-based 3D Printing of Polymer and Associated Composite: A Review on Mechanical Properties, Defects and Treatments,” Polymers, Vol. 12, No. 7, 2020, pp. 1529.
  •  
  • 9. Panda, B., Paul, S.C., and Tan, M.J., “Anisotropic Mechanical Performance of 3D Printed Fiber Reinforced Sustainable Construction Material,” Materials Letters, Vol. 209, No. 2017, pp. 146-149.
  •  
  • 10. Hambach, M., Rutzen, M., and Volkmer, D., “Properties of 3D-printed Fiber-reinforced Portland Cement Paste,” 3D Concrete Printing Technology, Butterworth-Heinemann, 2019, pp. 73-113.
  •  

This Article

Correspondence to

  • Jong-Hwan Suhr

  • * Department of Polymer Science and Engineering, Sungkyunkwan University
    ** School of Mechanical Engineering, Sungkyunkwan University

  • E-mail: suhr@skku.edu