Original Article
  • A Study on Simplification of Flow Analysis in VaRI Process

  • Yeongmin Kim*, **, Jungwan Lee*, Jungsoo Kim*, Sehoon Ahn*, **, Youngseok Oh*, Yi Jin Woo*, Wiedae Kim**, Moon-kwang Um*†

  • * Composites Research Division, Korea Institute of Materials Science, Changwon, Korea
    ** Department of Aerospace Engineering, Pusan National University, Pusan, Korea

  • VaRI 공정 유동해석 간소화 방법에 대한 연구

  • 김영민*, ** · 이정완* · 김정수* · 안세훈*, ** · 오영석* · 이진우* · 김위대** · 엄문광*†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Lee, J.H., Kim, W.H., Kim, Y.S., and Choi, S.W., “A Study on the Approach to Reduce in the Aviation GHG Emissions in Korea,” Jounal of the Korean Society for Aviation and Aeronautics, Vol. 24, No. 1, 2016, pp. 47-54.
  •  
  • 2. Kim, K.S., and Park, S.J., “Technique Status of Carbon Fibers-reinforced Composites for Aircrafts,” Elastomers and Composites, Vol. 46, No. 2, 2011, pp. 118-124.
  •  
  • 3. Harshe, R., “A Review on Advanced Out-of-Autoclave Composites Processing,” Journal of the Indian Institute of Science, Vol. 95, No. 3, 2015, pp. 207-220.
  •  
  • 4. Chen, R., Dong, C., Liang, Z., Zhang, C., and Wang, B., “Flow Modeling and Simulation for Vacuum Assisted Resin Transfer Molding Process with the Equivalent Permeability Method,” Polymer Composites, Vol. 25, No. 2, 2004, pp. 146-164.
  •  
  • 5. Trochu, F., Gauvin, R., and Gao, D.M., “Numerical Analysis of the Resin Transfer Molding Process by the Finite Element Method,” Advances in Polymer Technology: Journal of the Polymer Processing Institute, Vol. 12, No. 4, 1993, pp. 329-342.
  •  
  • 6. Fuqua, M., and Glancey, J.L., “A Port Injection Process for Improved Resin Delivery and Flow Control in Vacuum-assisted Resin Transfer Molding,” ASME International Mechanical Engineering Congress and Exposition, Vol. 4773, 2006, pp. 45-57.
  •  
  • 7. Jhan, Y.T., Lee, Y.J., and Chung, C.H., “Experimental and Numerical Investigation of the VARTM Process with a Sandwich Structure,” Journal of composite materials, Vol. 46, No. 12, 2012, pp. 1417-1430.
  •  
  • 8. Park, Y.H., Kang, M.G., and Lee, W.I., “A Dual-Scale Analysis of Macroscopic Resin Flow in Vacuum Assisted Resin Transfer Molding Process,” Journal of the Korean Society for Composite Materials, Vol. 15, No. 6, 2002, pp. 1-7.
  •  
  • 9. Dong, C., “An Equivalent Medium Method for the Vacuum Assisted Resin Transfer Molding Process Simulation,” Journal of Comaterials, Vol. 40, No. 13, 2006, pp. 1193-1213.
  •  
  • 10. Chan, A.W., and Hwang, S.T., “Anisotropic In-plane Permeability of Fabric Media,” Polymer Engineering & Science, Vol. 31, No. 16, pp. 1233-1239.
  •  

This Article

Correspondence to

  • Moon-kwang Um

  • Composites Research Division, Korea Institute of Materials Science, Changwon, Korea

  • E-mail: umk1693@kims.re.kr