Original Article
  • Development of Composite Bipolar Plate for Vanadium Redox Flow Battery

  • Jun Woo Lim†

  • Graduate School of Flexible and Printable Electronics & Department of Mechatronics Engineering & LANL-CBNU Engineering Institute-Korea, Jeonbuk National University

  • 바나듐 레독스 흐름 전지용 복합재료 분리판 개발

  • 임준우†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Skyllas-Kazacos, M., SECONDARY BATTERIES – FLOW SYSTEMS | Vanadium Redox-Flow Batteries, Elsevier, Amsterdam, 2009, pp. 444-453.
  •  
  • 2. Yu, V.K., and Chen, D., “Peak Power Prediction of a Vanadium Redox Flow Battery,” Journal of Power Sources, Vol. 268, 2014, pp. 261-268.
  •  
  • 3. Kim, K.H., Kim, B.G., and Lee, D.G., “Development of Carbon Composite Bipolar Plate (BP) for Vanadium Redox Flow Battery (VRFB),” Composite Structures, Vol. 109, 2014, pp. 253-259.
  •  
  • 4. Kim, S., Thomsen, E., Xia, G., Nie, Z., Bao, J., Recknagle, K., Wang, W., Viswanathan, V., Luo, Q., Wei, X., Crawford, A., Coffey, G., Maupin, G., and Sprenkle, V., “1 kW/1 kWh Advanced Vanadium Redox Flow Battery Utilizing Mixed Acid Electrolytes,” Journal of Power Sources, Vol. 237, 2013, pp. 300-309.
  •  
  • 5. Park, S.-K., Shim, J., Yang, J. H., Jin, C.-S., Lee, B.S., Lee, Y.-S., Shin, K.H., and Jeon, J.-D., “Effect of Inorganic Additive Sodium Pyrophosphate Tetrabasic on Positive Electrolytes for a Vanadium Redox Flow Battery,” Electrochimica acta, Vol. 121, 2014, pp. 321-327.
  •  
  • 6. Xu, Q., Zhao, T.S., and Zhang, C., “Effects of SOC-dependent Electrolyte Viscosity on Performance of Vanadium Redox Flow Batteries,” Applied Energy, Vol. 130, 2014, pp. 139-147.
  •  
  • 7. Bartolozzi, M., “Development of Redox Flow Batteries. A Historical Bibliography,” Journal of Power Sources, Vol. 27, No. 3, 1989, pp. 219-234.
  •  
  • 8. Lim, J.W., Lee, D., Kim, M., Choe, J., Nam, S., and Lee, D.G., “Composite Structures for Proton Exchange Membrane Fuel Cells (PEMFC) and Energy Storage Systems (ESS): Review,” Composite Structures, Vol. 134, 2015, pp. 927-949.
  •  
  • 9. Yu, H.N., Lim, J.W., Kim, M.K., and Lee, D.G., “Plasma Treatment of the Carbon Fiber Bipolar Plate for PEM Fuel Cell,” Composite Structures, Vol. 94, No. 5, 2012, pp. 1911-1918.
  •  
  • 10. Avasarala, B., and Haldar, P., “Effect of Surface Roughness of Composite Bipolar Plates on the Contact Resistance of a Proton Exchange Membrane Fuel Cell,” Journal of Power Sources, Vol. 188, No. 1, 2009, pp. 225-229.
  •  
  • 11. Lee, D., Lim, J.W., Nam, S., Choi, I., and Lee, D.G., “Method for Exposing Carbon Fibers on Composite Bipolar Plates,” Composite Structures, Vol. 134, 2015, pp. 1-9.
  •  
  • 12. Lee, D., and Lee, D.G., “Electro-mechanical Properties of the Carbon Fabric Composites with Fibers Exposed on the Surface,” Composite Structures, Vol. 140, 2016, pp. 77-83.
  •  
  • 13. Lee, D., Choe, J., Nam, S., Lim, J.W., Choi, I., and Lee, D.G., “Development of Non-woven Carbon Felt Composite Bipolar Plates Using the Soft Layer Method,” Composite Structures, Vol. 160, 2017, pp. 976-982.
  •  
  • 14. Lee, D., and Lee, D.G., “Carbon Composite Bipolar Plate for High-temperature Proton Exchange Membrane Fuel Cells (HT-PEMFCs),” Journal of Power Sources, Vol. 327, 2016, pp. 119-126.
  •  
  • 15. Louis, M., Joshi, S.P., and Brockmann, W., “An Experimental Investigation of Through-thickness Electrical Resistivity of CFRP Laminates,” Composites Science and Technology, Vol. 61, No. 6, 2001, pp. 911-919.
  •  
  • 16. Lim, J.W., and Lee, D.G., “Development of Composite-metal Hybrid Bipolar Plates for PEM Fuel Cells,” International Journal of Hydrogen Energy, Vol. 37, No. 17, 2012, pp. 12504-12512.
  •  
  • 17. Inagaki, M., Iwashita, N., and Kouno, E., “Potential Change with Intercalation of Sulfuric Acid into Graphite by Chemical Oxidation,” Carbon, Vol. 28, No. 1, 1990, pp. 49-55.
  •  
  • 18. Lim, J.W., and Lee, D.G., “Carbon Fiber/polyethylene Bipolar Plate-carbon Felt Electrode Assembly for Vanadium Redox Flow Batteries (VRFB),” Composite Structures, Vol. 134, 2015, pp. 483-492.
  •  
  • 19. Choe, J., Kim, K.H., and Lee, D.G., “Corrugated Carbon/epoxy Composite Bipolar Plate for Vanadium Redox Flow Batteries,” Composite Structures, Vol. 119, 2015, pp. 534-542.
  •  
  • 20. Du, L., and Jana, S.C., “Highly Conductive Epoxy/graphite Composites for Bipolar Plates in Proton Exchange Membrane Fuel Cells,” Journal of Power Sources, Vol. 172, No. 2, 2007, pp. 734-741.
  •  

This Article

Correspondence to

  • Jun Woo Lim

  • Graduate School of Flexible and Printable Electronics & Department of Mechatronics Engineering & LANL-CBNU Engineering Institute-Korea, Jeonbuk National University

  • E-mail: jul170@jbnu.ac.kr