Original Article
  • A Study on the Improvement of Bending Characteristics of 3D Printed Thermoplastic Structures Reinforced at the Lateral Surface using Continuous Fiber Reinforced Thermosetting Composites

  • Un-Gyeong Baek*, ***, Gibeop Nam**, Jae-Seung Roh***, Sung-Eun Park*, Jeong-U Roh*†

  • * Gumi Electronics & Information Technology Research Institute (GERI), Innovative Technology Research Division
    ** Kumoh National Institute of Technology, Advanced Material Research Center
    *** Kumoh National Institute of Technology, School of Materials Science and Engineering

  • 열경화성 연속섬유 복합재를 이용해 외측 보강된 3D 프린팅 열가소성 복합재 구조물의 굽힘 특성 향상에 대한 연구

  • 백운경*, *** · 남기법** · 노재승*** · 박성은* · 노정우*†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Mikula1, K., Skrzypczak, D., Izydorczyk, G., Warchoł, J., Moustakas, K., Chojnacka, K., and Witek-Krowiak, A., “3D Printing Filament as a Second Life of Waste Plastics—A Review,” Environmental Science and Pollution Research, Vol. 28, 2021, pp. 12321-12333.
  •  
  • 2. Dizona, C.J.R., Espera Jr., H.A., Chena, Q., and Advinculaa, C.R., “Mechanical Characterization of 3D-printed Polymers,” Additive Manufacturing, Vol. 20, 2018, pp. 44-67.
  •  
  • 3. Blok, L.G., Longana, M.L., Yu, H., and Woods, B.K.S., “An Investigation into 3D Printing of Fibre Reinforced Thermoplastic Composites,” Additive Manufacturing, Vol. 22, 2018, pp. 176-186.
  •  
  • 4. Sanei, S.H.R., and Popescu, D., “3D-Printed Carbon Fiber Reinforced Polymer Composites: A Systematic Review,” Journal of Composites Science, Vol. 4, No. 3, 2020, pp. 1-23.
  •  
  • 5. Gao, X., Zhang, D., Wen, X., Qi, S., Su, Y., and Dong, X., “Fused Deposition Modeling with Polyamide 1012,” Rapid Prototyping Journal, Vol. 25, No. 7, 2019, pp. 1145-1154.
  •  
  • 6. Liao, G., Li, Z., Cheng, Y., Xu, D., Zhu, D., Jiang, S., Guo, J., Chen, X., Xu, G., and Zhu, Y., “Properties of Oriented Carbon Fiber/polyamide 12 Composite Parts Fabricated by Fused Deposition Modeling,” Materials & Design, Vol. 139, 2018, pp. 283-292.
  •  
  • 7. Spoerk, M., Arbeiter, F., Cajner, H., Sapkota, J., and Holzer, C., “Parametric Optimization of Intra- and Inter-layer Strengths in Parts Produced by Extrusion-based Additive Manufacturing of Poly(lactic acid),” Journal of Applied Polymer Science, Vol. 134, No. 41, 2017, 45401.
  •  
  • 8. Akhoundi, A.B., and Behravesh, A.H., “Effect of Filling Pattern on the Tensile and Flexural Mechanical Properties of FDM 3D Printed Products,” Experimental Mechanics, Vol. 59, 2019, pp. 883-897.
  •  
  • 9. Korkees, F., Allenby, J., and Dorrington, P., “3D Printing of Composites: Design Parameters and Flexural Performance,” Rapid Prototyping Journal, Vol. 26, No. 4, 2020, pp. 699-706.
  •  
  • 10. Calignano, F., Lorusso, M., Roppolo, I., and Minetola, P., “Investigation of the Mechanical Properties of a Carbon Fibre-Reinforced Nylon Filament for 3D Printing,” Machines, Vol. 8, No. 3, 2020, pp. 1-13.
  •  
  • 11. Dickson, A.N., Barry, J.N., McDonnell, K.A., and Dowling, D.P., “Fabrication of Continuous Carbon, Glass and Kevlar Fibre Reinforcedpolymer Composites using Additive Manufacturing,” Additive Manufacturing, Vol. 16, 2017, pp. 146-152.
  •  
  • 12. Ary Subagia, I.D.G., Kim, Y., Tijing, L.D., Kim, C.S., and Shon, H.K., “Effect of Stacking Sequence on the Flexural Properties of Hybrid Composites Reinforced with Carbon and Basalt Fibers,” Composites: Part B, Vol. 58, 2014, pp. 251-258.
  •  
  • 13. He, B., Wang, B., Wang, Z., Qi, S., Tian, G., and Wu, Z., “Mechanical Properties of Hybrid Composites Reinforced by Carbon Fiber and High-strength and High-modulus Polyimide Fiber,” Polymer, Vol. 204, 2020, pp. 1-9.
  •  
  • 14. Wonderlya, C., Grenestedta, J., Fernlundb, G., and Ceˇpusb, E., “Comparison of Mechanical Properties of Glass Fiber/vinyl Ester and Carbon Fiber/vinyl Ester Composites,” Composites Part B: Engineering, Vol. 36, No. 5, 2005, pp. 417-426.
  •  

This Article

Correspondence to

  • Jeong-U Roh

  • Gumi Electronics & Information Technology Research Institute (GERI), Innovative Technology Research Division

  • E-mail: juroh@geri.re.kr