Original Article
  • Study on Microstructure and Physical Properties of PUF by the Impeller Type of Agitator
  • Chae-Rim Lee*, Jung Soo Kim*, Byeongho Park*, Moon-Kwang Um*, Teahoon Park*†

  • * Carbon Composite Department, Korea Institute of Materials Science (KIMS), Changwon 51508, Korea

  • 교반기의 임펠러 형태에 따른 폴리우레탄 폼의 미세구조와 물성 연구
  • 이채림*· 김정수*· 박병호*· 엄문광*· 박태훈*†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

References
  • 1. Park, Y.G., Lee, J.H., Joo, A.R., and Lee, S.H., “Effect of Nano-bubble Application on the Properties of Water Blown Rigid Polyurethane Foam,” Polymer, Vol. 42, No. 2, 2018, pp. 215-222.
  •  
  • 2. Rao, R.R., Mondy, L.A., Long, K.N., Celina, M.C., Wyatt, N., Roberts, C.C., Soehnel, M.M., and Brunini, V.E., “The Kinetics of Polyurethane Structural Foam Formation: Foaming and Polymerization,” AIChE Journal, Vol. 63, No. 7, 2017, pp. 2945-2957.
  •  
  • 3. Brenes-Granados, D., Cubero-Sesin, J.M., Orozco Gutiérrez, F., Vega-Baudrit, J., and Gonzalez-Paz, R., “Variation of Physical Properties of Rigid Polyurethane Foams Synthesized from Renewable Sources with Different Commercial Catalysts,” Journal of Renewable Materials, Vol. 5, No. 3-4, 2017, pp. 280-289.
  •  
  • 4. Cao, X., James Lee, L., Widya, T., and Macosko, C., “Polyurethane/clay Nanocomposites Foams: Processing, Structure and Properties,” Polymer, Vol. 46, No. 3, 2005, pp. 775-783.
  •  
  • 5. Javni, I., Song, K., Lin, J., and Petrovic, Z.S., “Structure and Properties of Flexible Polyurethane Foams with Nano- and Micro-fillers,” Journal of Cellular Plastics, Vol. 47, No. 4, 2011, pp. 357-372.
  •  
  • 6. Modesti, M., Lorenzetti, A., and Besco, S., “Influence of Nanofillers on Thermal Insulating Properties of Polyurethane Nanocomposites Foams,” Polymer Engineering and Science, Vol. 47, No. 9, 2007, pp. 1351-1358.
  •  
  • 7. Guo, A., Javni, I., and Petrovic, Z., “Rigid Polyurethane Foams Based on Soybean Oil,” Journal of Applied Polymer Science, Vol. 77, No. 2, 2000, pp. 467-473.
  •  
  • 8. You, K.M., Park, S.S., Lee, C.S., Kim, J.M., Park, G.P., and Kim, W.N., “Preparation and Characterization of Conductive Carbon Nanotube-polyurethane Foam Composites,” Journal of Materials Science, Vol. 46, No. 21, 2011, pp. 6850-6855.
  •  
  • 9. Paul, E.L., Atiemo-Obeng, V.A., and Kresta, S.M., Handbook of Industrial Mixing: Science and Practice, Wiley-Interscience, Hoboken, 2004.
  •  
  • 10. Kim, C.B., and Kim, S.B., “Study on the Properties of Flexible Polyurethane Foam at the Aging Condition,” Journal of the Korean Institute of Gas, Vol. 16, No. 6, 2012, pp. 123-127.
  •  
  • 11. Gogoi, R., Alam, M., and Khandal, R., “Effect of Increasing NCO/OH Molar Ratio on the Physicomechanical and Thermal Properties of Isocyanate Terminated Polyurethane Prepolymer,” International Journal of Basic and Applied Sciences, Vol. 3, No. 2, 2014, pp. 118-123.
  •  
  • 12. Kim, D.E., Kang, S.O., and Lee, S.H., “Effect of NCO Index on the Particle Size of Polycarbonate Diol-based Polyurethane Dispersion,” Elastomers and Composites, Vol. 55, No. 1, 2020, pp. 20-25.
  •  
  • 13. Shakirova, G.D., Romanova, N.V., and Shafigullin, L.N., “The Influence of Heat Treatment on the Quality of Vehicle Component Parts Made of Rigid Polyurethane Foam,” Materials Science Forum, Vol. 989, 2020, pp. 10-15.
  •  
  • 14. Liszkowska, J., and Czupryński, B., “Thermal Properties of Polyurethane-Polyisocyanurate (PUR-PIR) Foams Modified with Tris(5-Hydroxypenthyl) Citrate,” Journal of Advanced Chemical Engineering, Vol. 6, No. 2, 2016.
  •  
  • 15. Wang, T.P., Zheng, Z.M., and Mao, Z.H., “Characterization of Polyurethane Foams Prepared from Non-pretreated Liquefied Corn Stover with PAPI,” The Canadian Journal of Chemical Engineering, Vol. 89, No. 1, 2011, pp. 171-175.
  •  
  • 16. Li, Y., and Ragauskas, A.J., “Ethanol Organosolv Lignin-based Rigid Polyurethane Foam Reinforced with Cellulose Nanowhiskers,” RSC Advances, Vol. 2, No. 8, 2012, pp. 3347-3351.
  •  
  • 17. Park, K.K., and Lee, S.H., “Thermal Decomposition of Ammonium Polyphosphate-polyurethane Composite Foam Brown H2O,” Elastomers and Composites, Vol. 50, No. 4, 2015, pp. 297-303.
  •  
  • 18. Shin, H.K., and Lee, S.H., “Effect of Catalyst Type and NCO Index on the Synthesis and Thermal Properties of Poly(urethane-isocyanurate) Foams,” Elastomers and Composites, Vol. 53, No. 2, 2018, pp. 86-94.
  •  
  • 19. Lee, B.J., and Kim, S.B., “Mechanical Properties and Flame Retardancy of Rigid Polyurethane Foam Using New Phosphorus Flame Retardant,” Applied Chemistry for Engineering, Vol. 27, No. 6, 2016, pp. 577-582.
  •  

This Article

Correspondence to

  • Teahoon Park
  • Carbon Composite Department, Korea Institute of Materials Science (KIMS), Changwon 51508, Korea

  • E-mail: thpark@kims.re.kr