Original Article
  • A Study on Heating Element Properties of Carbon Nanotube/Silicon Carbonitride Composite Sheet using Branched Structured Polysilazane as Precursor

  • Tae-Hwan Huh*, Hyeon Jun Song*, Yeong Jin Jeong*, Young-Je Kwark*†

  • * Department of Organic Materials and Fiber Engineering, Soongsil University

  • 가지 달린 구조의 폴리실라잔을 전구체로 이용해 제조한 카본 나노튜브/실리콘 카보나이트라이드 복합체 시트의 발열특성에 관한 연구

  • 허태환* · 송현준* · 정영진* · 곽영제*†

References
  • 1. Yang, J.Y., Yoon, D.H., Kim, B.S., and Seo, M.K., “Preparation and Characterization of Pitch-based Carbon Paper for Low Energy and High Efficiency Surface Heating Elements”, Composites Research, Vol. 31, No. 6, 2018, pp. 412-420.
  •  
  • 2. Yang, J.Y., Ko, J.K., Kim, B.S., and Seo, M.K., “Application and Standardization Trend of Carbon Fiber during the Fourth Industri-al Revolution”, Fiber Technology and Industry, Vol. 21, No. 4, 2017, pp. 263-272.
  •  
  • 3. Zhao, J. Jian, Q., Zhang, N., Luo, L., Huang, B., and Cao, S., “The Improvement on Drying Performance and Energy Efficiency of a Tumbler Clothes Dryer with a Novel Electric Heating Element”, Applied Thermal Engineering, Vol. 128, 2018, pp. 531-538.
  •  
  • 4. Bae, K.Y., Lee, K.S., Kong, T.W., Chung, H.S., Jeong, H.Y., and Chung, H.T., “A Study on Application of Warm Air Circulator by Using the Carbon Heating Element with Particle Type”, Journal of the Korean Society for Power System Engineering, Vol. 7, No. 4, 2003, pp. 31-37.
  •  
  • 5. Park, J.Y., and Lee, J.D., “Electrical Properties of Carbon Black Composites for Flexible Fiber Heating Element”, Journal of the Ko-rean Oil Chemists Society, Vol. 32, No. 3, 2015, pp. 405-411.
  •  
  • 6. Choi, K.E., Park, C.H., and Seo, M.K., “Electrical and Resistance Heating Properties of Carbon Fiber Heating Element for Car Seat”, Applied Chemistry for Engineering, Vol. 27, No. 2, 2016, pp. 210-216.
  •  
  • 7. Chugh, R., and Chung, D.D.L., “Flexible Graphite as a Heating Element”, Carbon, Vol. 40, No. 13, 2002, pp. 2285-2289.
  •  
  • 8. Hong, S., and Myung, S., “Nanotube Electronics: A Flexible Approach to Mobility”, Nature Nanotechnology, Vol. 2, No. 4, 2007, pp. 207-208.
  •  
  • 9. Sundaram, R.M., Koziol, K.K., and Windle, A.H., “Continuous Direct Spinning of Fibers of Single-Walled Carbon Nanotubes with Metallic Chirality”, Advanced Materials, Vol. 23, No. 43, 2011, pp. 5064-5068.
  •  
  • 10. Pop, E., Mann, D., Wang, Q., Goodson, K., and Dai, H., “Thermal Conductance of an Individual Single-Wall Carbon Nanotube above Room Temperature”, Nano Letters, Vol. 6, No. 1, 2006, pp. 96-100.
  •  
  • 11. Janas, D., and Koziol, K.K., “Rapid Electrothermal Response of High-Temperature Carbon Nanotube Film Heaters”, Carbon, Vol. 59, 2013, pp. 457-463.
  •  
  • 12. Neitzert, H.C., Vertuccio, L., and Sorrentino, A., “Epoxy/MWCNT Composite as Temperature Sensor and Electrical Heating Ele-ment”, IEEE Transactions on Nanotechnology, Vol. 10, No. 4, 2011, pp. 688-693.
  •  
  • 13. Lee, Y., Le, V.T., Kim, J.G., Kang, H., Kim, E.S., Ahn, S.E., and Suh D., “Versatile, High-Power, Flexible, Stretchable Carbon Nano-tube Sheet Heating Elements Tolerant to Mechanical Damage and Severe Deformation”, Advanced Functional Materials, Vol. 28, No. 8, 2018, pp. 1706007.
  •  
  • 14. Li, Y., Yang, M., Xu, B., Sun, Q., Zhang, W., Zhang, Y., and Meng, F., “Synthesis, Structure and Antioxidant Performance of Boron Nitride (Hexagonal) Layers Coating on Carbon Nanotubes (Multi-Walled)”, Applied Surface Science, Vol. 450, No. 30, 2018, pp. 284-291.
  •  
  • 15. He, J., Chen, J., Shi, L., Li, Q., Lu, W., Qu, S., Qiu, W., and Zhou, G., “Fabrication of Thermally Robust Carbon Nanotube (CNT)/SiO2 Composite Films and Their High-Temperature Mechanical Properties”, Carbon, Vol. 147, 2019, pp. 236-241.
  •  
  • 16. Colombo, P., Riedel, R., Sorarù, and Kleebe, H.K., Polymer Derived Ceramics: From Nanostructure to Applications, DEStech Pub. Inc., Lancaster, UK, 2010.
  •  
  • 17. Popper, P., Special Ceramics, Academic Press, New York, USA, 1960.
  •  
  • 18. Ionescu, E., Kleebe, H.J., and Riedel, R., “Silicon-Containing Polymer-Derived Ceramic Nanocomposites (PDC-NCs): Preparative Approaches and Properties”, Chemical Society Reviews, Vol. 41, No. 15, 2012, pp. 5032-5052.
  •  
  • 19. Kokott, S., Heymann, L., and Motz, G., “Rheology and Processability of Multi-Walled Carbon Nanotubes-ABSE Polycarbosilazane Composites”, Journal of the European Ceramic Society, Vol. 28, No. 5, 2008, pp. 1015-1021.
  •  
  • 20. Jones, R., Szweda, A., and Petrak, D., “Polymer Derived Ceramic Matrix Composites”, Composites Part A, Vol. 30, No. 4, 1999, pp. 569-575.
  •  
  • 21. Huh, T.H., Lee, S.Y., Park, S.K., Chang, J.H., Lee, Y.S., and Kwark, Y.J., “Homogeneous Polyimide/Silica Nanohybrid Films Adapt-ing Simple Polymer Blending Process: Polymeric Silsesquiazane Precursor to Inorganic Silica”, Macromolecular Research, Vol. 26, No. 2, 2018, pp. 187-193.
  •  
  • 22. Huh, T.H., and Kwark, Y.J., “Fabrication of Hierarchically Micro/Meso/Macroporous Silicon Carbonitride Ceramic Using Freeze Casting Method with a Silsesquiazane Precursor”, Ceramics International, Vol. 46, No. 8, 2020, pp. 11218-11224.
  •  
  • 23. Yoo, K.H., Kim, I.W., Cho, J.H., and Kwark, Y.J., “Silsesquiazane/Organic Polymer Blends as Organic-Inorganic Hybrid Materials”, Fibers and Polymers, Vol. 13, no. 9, 2012, pp. 1113-1119.
  •  
  • 24. Colombo, P., Mera, G., Riedel, R., and Soraru, G.D., “Polymer-Derived Ceramics: 40 Years of Research and Innovation in Advanced Ceramics”, Journal of the American Ceramic Society, Vol. 93, No. 7, 2010, pp. 1805-1837.
  •  
  • 25. Yang, L.W., Zhang, X.S., Liu, H.T., and Zu, M., “Thermal Resistant, Mechanical and Electrical Properties of a Novel Ultra-high-Content Randomly-Oriented CNTs Reinforced SiC Matrix Composite-Sheet”, Composites Part B, Vol. 119, No. 15, 2017, pp. 10-17.
  •  
  • 26. Song, H., Jeon, S.Y., and Jeong, Y., “Fabrication of a Coaxial High Performance Fiber Lithium-Ion Battery Supported by a Cotton Yarn Electrolyte Reservoir”, Carbon, Vol. 147, 2019, pp. 441-450.
  •  

This Article

Correspondence to

  • Young-Je Kwark

  • Department of Organic Materials and Fiber Engineering, Soongsil University

  • E-mail: ykwark@soongsil.ac.kr