Special Issue
  • Thermo-rheological behaviors of Phenolic Resins Blended with Petroleum-based Pitches for High Temperature Carbon Composites
  • Jae-Yeon Yang*, Yun-Su Kuk*, Min-Kang Seo*, Byoung-Suhk Kim**

  • * Korea Institute of Carbon Convergence Technology
    ** Department of Organic Materials and Fiber Engineering, Jeonbuk National University

  • 석유계 피치가 첨가된 고온 탄소복합재용 페놀수지의 열 유변학적 거동 연구
  • 양재연* · 국윤수* · 서민강* · 김병석**

References
  • 1. Park, S.J., Seo, M.K., Park, M.L., and Kim, H.Y., Carbon Materials, Myoungmoon Pub. Co., Seoul, Republic of Korea, 2015.
  •  
  • 2. Yang, J.Y., Ko, J.K., Kim, B.S., and Seo, M.K., “Application and Standardization Trend of Carbon Fiber during the Fourth Industri-al Revolution”, Fiber Technology and Industry, Vol. 21, No. 4, 2017, pp. 263-272.
  •  
  • 3. Seo, M.K., and Park, S.J., “Manufacturing Method of Carbon Fibers and Their Application Fields”, Polymer Science and Technology, Vol. 21, No. 2, 2010, pp. 130-140.
  •  
  • 4. Yang, J.Y., Park, S.H., Park, S.J., and Seo, M.K., “Preparation and Characteristic of Carbon/Carbon Composites with Coal-tar and Petroleum Binder Pitches”, Applied Chemistry for Engineering, Vol. 26, No. 4, 2015, pp. 406-412.
  •  
  • 5. Chockalingam, K., Saravanan, U., and Murali Krishnan, J., “Characterization of Petroleum Pitch using Steady Shear Experiments”, International Journal of Engineering Science, Vol. 48, No. 11, 2010, pp. 1092-1109.
  •  
  • 6. Blanco, C., Fleurot, O., Menendez, R., Santamaría, R., Bermejo, J., and Edie, D., “Contribution of the Isotropic Phase to the Rheol-ogy of Partially Anisotropic Coal-tar Pitches”, Carbon, Vol. 37, No. 7, 1999, pp. 1059-1064.
  •  
  • 7. Xuefeng, L., Jie, Z., and Kun, Q., “Densification Rate and Mechanical Properties of Carbon/carbon Composites with Layer-designed Preform”, Ceramics International, Vol. 45, No. 4, 2019, pp. 4167-4175.
  •  
  • 8. Ehrburger, P., Sanseigne, E., and Tahon, B., “Formation of Porosity and Change in Binder Pitch Properties During Thermal Treat-ment of Green Carbon Materials”, Carbon, Vol. 34, No. 12, 1996, pp. 1493-1499.
  •  
  • 9. Majidi, B., Taghavi, S.M., Fafard, M., Ziegler, D., and Alamdari, H., “Discrete Element Method Modeling of the Rheological Prop-erties of Coke/Pitch Mixtures”, Materials, Vol. 9, No. 5, 2016, pp. 334.
  •  
  • 10. Ciesinska, W., “Thermo-rheological Properties of Coal-tar Pitch modified with Phenol-Formaldehyde Resin”, J Therm Anal Calorim, Vol. 130, No. 1, 2017, pp. 187–195.
  •  
  • 11. Braga, C.P., Dutra, C.H.M.C., Castro, L.D., and Andrade, C.T., “Influence of Heat and Pressure Treatment on the Rheological Be-havior of Petroleum Pitches”, Fuel, Vol. 88, No. 5, 2009, pp. 853-860.
  •  
  • 12. Dimitrienko, Y.I., “Modelling of Carbon-carbon Composites Manufacturing Processes”, Composites Part A, Vol. 30, No. 3, 1999, pp. 221–230.
  •  
  • 13. Hu, Y., Luo, R., Zhang, Y., Zhang, J., and Li, J., “Effect of Preform Density on Densification Rate and Mechanical Properties of Carbon/carbon Composites”, Materials Science and Engineering: A, Vol. 527, No. 3, 2010, pp. 797–801.
  •  
  • 14. Matzinos, P., Patrick, J., and Walker, A., “The Efficiency and Mechanism of Densification of 2-D C/C Composites by Coal-tar Pitch Impregnation”, Carbon, Vol. 38, No. 8, 2000, pp.1123–1128.
  •  
  • 15. Behnood, A., and Gharehveran, M.M., “Morphology, Rheology, and Physical Properties of Polymer-modified Asphalt Binders”, Eu-ropean Polymer Journal, Vol. 112, 2019, pp. 766-791.
  •  
  • 16. Yang, J.Y., Park, J.H., Kuk, Y.S., Kim, B.S., and Seo, M.K., “One-Step Densification of Carbon/Carbon Composites Impregnated with Pyrolysis Fuel Oil-Derived Mesophase Binder Pitches”, C-Journal of Carbon Research, Vol. 6, No. 1, 2020, pp. 5.
  •  
  • 17. Yang, J.Y., Kim, B.S., Park, S.J., Rhee, K.Y., and Seo, M.K., “Preparation and Characterization of Mesophase Formation of Pyrolysis Fuel Oil-derived Binder Pitches for Carbon Composites”, Composites Part B, Vol. 165, 2019, pp. 467-472.
  •  
  • 18. Sekhar, N.C., and Varghese, L.A., “Mechanical, Thermal, and Rheological Studies of Phenolic Resin Modified with Intercalated Graphite prepared Via Liquid Phase Intercalation”, Polymer Testing, Vol. 79, 2019, pp. 106010.
  •  
  • 19. Li, X., and Li, Q., “Rheological Properties and Carbonization of Coal-tar Pitch”, Fuel, Vol. 75, No. 1, 1996, pp. 3-7.
  •  
  • 20. Khandare, P.M., Zondlo, J.W., Stansberry, P.B., and Stiller, A.H., “Rheological Investigations of Pitch Material Part II: Viscosity Measurement of A240 and ARA-24 Pitches using a High-temperature High-pressure Rheometer”, Carbon, Vol. 38, No. 6, 2000, pp. 889-897.
  •  
  • 21. Kundu, S., and Ogale, A.A., “Rheostructural Studies on a Synthetic Mesophase Pitch during Transient Shear Flow”, Carbon, Vol. 44, No. 11, 2006, pp. 2224-2235.
  •  
  • 22. Nutz, M., Furdin, G., Medjahdi, G., Mareche, J.F., and Moreau, M., “Rheological Properties of Coal tar Pitches Containing Micronic Graphite Powders”, Carbon, Vol. 35, No. 7, 1997, pp. 1023-1029.
  •  
  • 23. Yu, R., Liu, D., Lou, B., Zhu, W., Guo, S., Gong, X., Zhang, Z., Ye, J., and Zhu, C., “The Effect of Solvent Extraction on Petroleum Pitch Compositions and their Pyrolysis Behaviors”, Fuel, Vol. 247, 2019, pp. 97-107.
  •  
  • 24. Dumont, M., Dourges, M.A., Pailler, R., and Bourrat, X., “Mesophase Pitches for 3D-carbon Fibre Preform Densification: Rheology and Processability”, Fuel, Vol. 82, No. 12, 2003, pp. 1523-1529.
  •  
  • 25. Miyajima, N., Akatsu, T., Ito, O., Sakurovs, R., Shimizu, S., Sakai M., Tanabe Y., and Yasuda E., “The Rheological Behavior during Carbonization of Iodine-treated Coal tar Pitch”, Carbon, Vol. 39, No. 5, 2001, pp. 647-653.
  •  
  • 26. Yang, X., and Frazier, C.E., “Influence of Organic Fillers on Rheological Behavior in Phenol-formaldehyde Adhesives”, International Journal of Adhesion & Adhesives, Vol. 66, 2016, pp. 93–98.
  •  
  • 27. Na, H.Y., Yeom, H.Y., Yoon, B.C., and Lee, S.J., “Cure Behavior and Chemorheology of Low Temperature Cure Epoxy Matrix Res-in”, Polymer(Korea), Vol. 38, No. 2, 2013, pp. 171-179.
  •  
  • 28. Rindusit, S., and Ishida, H., “Gelation Study of High Processability and High Reliability Ternary Systems based on Benzoxazine, Epoxy, and Phenolic Resins for an Application as Electronic Packaging Materials”, Rheol Acta, Vol. 41, No. 1-2, 2002, pp. 1-9.
  •  
  • 29. Domínguez, J.C., Alonso, M.V., Oliet, M., and Rodríguez, F., “Chemorheological Study of the Curing Kinetics of a Phenolic Resol Resin Gelled”, European Polymer Journal, Vol. 46, No. 1, 2010, pp. 50-57.
  •  

This Article

Correspondence to

  • Min-Kang Seo*, Byoung-Suhk Kim**
  • * Korea Institute of Carbon Convergence Technology
    ** Department of Organic Materials and Fiber Engineering, Jeonbuk National University

  • E-mail: seomk721@kctech.re.kr, kbsuhk@jbnu.ac.kr