Original Article
  • Effect of Adhesive Shear Strength of CFRP/Ni-Cr Alloy Under Severe Environmental Condition
  • Hyeon-Tae Cho*, Seong-Min Park*, Min-Jun Kim*, Van-Tho Hoang**, Hak-Inn Kim***,
    Myung-Sook Son***, Jong-Kee Ahn***, Ji-Min An****, Jin-Ho Choi*, Young-Woo Nam*†, Jin-Hwe Kweon*†

  • * Mechanical & Aerospace Engineering, Gyeong-sang National University
    ** Department of Aerospace and System Engineering, Research Center for Aircraft Parts Technology, Gyeong-sang National University
    *** Advanced Technology Team, Aerospace R&D Center, Hanwha Aerospace
    **** R&D Center, Kolon Dacc Composite

  • 가혹 환경이 복합재/Ni-Cr 합금 접착전단강도에 미치는 영향 연구
  • 조현태* · 박성민* · 김민준* · 황반토** · 김학인*** · 손명숙*** · 안종기*** · 안지민**** · 최진호* · 남영우*† · 권진회*†

References
  • 1. Kim, D.J., Oh, D.Y., Jeong, M.K., and Nam S.Y., “Recent Trends in Composite Materials for Aircrafts,” Journal of Applied Chemis-try for Engineering, Vol. 27, No. 3, 2016, pp. 252-258.
  •  
  • 2. Cantwell, W.J., Curtis, P.T., and Morton, J., “An Assessment of the Impact Performance of CFRP Reinforced with High-strain Carbon Fibres,” Journal of Composites Science and Technology, Vol. 25, No. 2, 1986, pp. 133-148.
  •  
  • 3. Iqbal, K., Khan, S.U., Munir, A., and Kim, J.K., “Impact Damage Resistance of CFRP with Nanoclay-filled Epoxy Matrix,” Journal of Composites Science and Technology, Vol. 69, No. 11-12, 2009, pp. 1949-1957.
  •  
  • 4. Yoshimura, A., Nakao, T., Yashiro, S., and Takeda, N., “Improvement on Out-of-plane Impact Resistance of CFRP Laminates due to Through-the-thickness Stitching,” Journal of Composites: Part A, Vol. 39, No. 9, 2008, pp. 1370-1379.
  •  
  • 5. Shin, D.W., Kim, J.J., Lee, J.H., Kwon, I.J., and Park, S.M., “Evaluation on the Effect of Beads for Adhesive Improvement of CFRP and Aluminum,” Journal of Composites Research, Vol. 30, No. 4, 2017, pp. 254-260.
  •  
  • 6. Lee, M.S., Kim, H.H., and Kang, C.G., “Effect of Surface Roughness of Al5052/CFRP Composites on the Adhesion and Mechanical Properties,” Journal of Composites Research, Vol. 26, No. 5, 2013, pp. 295-302.
  •  
  • 7. Kwon, D.J., Park, S.M., Park, J.M., and Kwon, I.J., “A Study on Bonding Process for Improvement of Adhesion Properties Between CFRP-Metal Dual Materials,” Journal of Composites Research, Vol. 30, No. 6, 2017, pp. 416-421.
  •  
  • 8. Yoo, S.H., Kwon, I.J., Shin, D.W., Park, S.M., and Yeum, J.H., “The Analysis on Properties of Epoxy/MWCNT for Bonding CFRP to Steel Plates,” Journal of Composites Research, Vol. 30, No. 3, 2017, pp. 215-222.
  •  
  • 9. Song, M.G., Kweon, J.H., Choi, J.H., Kim, H.J., Song, M.H., and Shin, S.J., “Strength of Composite Single-lap Bonded Joints with Various Manufacturing Processes for Aircraft Application,” Journal of the Korean Society for Aeronautical and Space Science, Vol. 37, No. 8, 2009, pp. 751-758.
  •  
  • 10. Rhee, K.Y., Yang, J.H., and Choi, N.S., “A Study on the Curing Method to Improve Bonding Strength of Aluminum/CFRP Compo-sites,” Journal of the Korean Society Automotive Engineers, Vol. 10, No. 3, 2002, pp. 130-135.
  •  
  • 11. Hong, S.W., Ahn, S.S., Koo, J.M., and Seok, C.S., “Analysis of Characteristics of CFRP Composites Exposed Under High-Temperature and High-Humidity Environment for a Long Period,” Journal of Transactions of the Korean Society of Mechani-cal Engineers A, Vol. 36, No. 8, 2012, pp. 889-895.
  •  
  • 12. Kim, H.I., Ryu, G.Y., Kim, J., Kim, K.M., Lee, K.S., Park, Y.J., Park, B.J., and Ryu, H.K., “A Study on the Bearing Strength of Bolt Jointed Section for Composite Aircraft Radome Under Hygrothermal Environments,” Journal of Transactions of the Korean Society of Mechanical Engineers A, Vol. 41, No. 8, 2017, pp. 759-764.
  •  
  • 13. Kim, H.J., Lee, S.J., Han, S.H., Kim, S.K., and Park, S.J., “Effect of Cold Temperature Dry and Elevated Temperature Wet on Me-chanical Properties of CFRP Composites,” Journal of Composites Research, Vol. 22, No. 3, 2009, pp. 60-65.
  •  
  • 14. Im, J.M., Shin, K.B., and Hwang, T.K., “Evaluation of Mechanical Properties of Carbon/Epoxy Composites Under In situ Low- and High-Temperature Environments”, Journal of Transactions of the Korean Society of Mechanical Engineers A, Vol. 39, No. 6, 2015, pp. 567-573.
  •  
  • 15. Eum, S.H., Dutta, P.K., Kwon, S.C., Kim, K.J., and Kim, Y.H., “Effect of Fabrication Methods on Static Strength of Polymer Based Composites under the Low Temperature Range”, Proceeding of Transactions of the Korean Society of Mechanical Engineers A, 2003, pp. 7-12.
  •  
  • 16. Yoon, S.H., and Shi, Y.L., “Prediction of Long-Term Interlaminar Shear Strength of Carbon Fiber/Epoxy Composites Exposed to Environmental Factors,” Journal of Composites Research, Vol. 30, No. 1, 2017, pp. 71-76.
  •  
  • 17. Suh, D.W., Ku, M.K., Nam, J.D., Choi, H.S., Chung, K.M., and Ahn, K.J., “Hygrothermal Cycling Studies of Epoxy/Carbon Fiber Composite Laminate,” Journal of Polymer(Korea), Vol. 21, No. 6, 1997, pp. 1029-1038.
  •  
  • 18. Kim, M.G., Kang, S.G., Kim, C.G., and Kong, C.W., “A Study on Tensile Properties of CFRP Composites under Cryogenic Envi-ronment,” Journal of Composites Research, Vol. 17, No. 6, 2004, pp. 52-57.
  •  
  • 19. ASTM D3528-96(2002), Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading, ASTM International, West Conshohocken, PA, 1996, www.astm.org.
  •  
  • 20. Kim, M.H., and Park, S.W., “Estimation of Thermal Environment of T-50 Aircraft in Extreme High Temperature Condition,” Pro-ceeding of the Korean Society for Aeronautical and Space Science, Jeju, Korea, Nov. 2008, pp. 1180-1183.
  •  
  • 21. Kim, M.H., and Kim, J.Y., “Thermal Environment Test of T-50 Aircraft utilizing the Environmental Test Facility,” Proceeding of The Korean Society for Aeronautical and Space Science, Jeju, Korea, Nov. 2010, pp. 1298-1301.
  •  
  • 22. Anderson, J.D., Fundamentals of Aerodynamics, McGraw-Hill Book Co., New York, USA, 2011.
  •  
  • 23. Tomblin, J., McKenna, J., Ng, Y., and Raju, K.S., AGATE-WP3.3-033051-102, B-Basis Design Allowables for Epoxy-Based Prepreg: Fiberite 8-Harness Graphite Fabric T650 3K-135-8H/7740, 2001.
  •  
  • 24. Jedidi, J., Jacquemin, F., and Vautrin, A., “Design of Accelerated Hygrothermal Cycles on Polymer Matrix Composites in the Case of a Supersonic Aircraft”, Journal of Composite Structures, Vol. 68, No. 4, 2005, pp. 429-437.
  •  
  • 25. Shin, J.H., “Manufacture of RAS for Flight Vehicle with the Consideration of Various Environmental Conditions”, Ph. D Thesis, KAIST, Korea.
  •  
  • 26. Shechtman, O., “The Coefficient of Variation as a Measure of Sincerity of Effort of Grip Strength, Part I: The Statistical Principle,” Journal of Hand Therapy, Vol. 14, No. 3, 2001, pp. 180-187.
  •  
  • 27. Shechtman, O., The Coefficient of Variation as an Index of Measurement Reliability, Springer, Berlin, Germany, 2013.
  •  

This Article

Correspondence to

  • Young-Woo Nam, Jin-Hwe Kweon
  • Mechanical & Aerospace Engineering, Gyeong-sang National University

  • E-mail: ywnam@gnu.ac.kr, jhkweon@gnu.ac.kr