Original Article
  • Study of Cure Kinetics of Vacuum Bag Only Prepreg Using Differential Scanning Calorimetry

  • Dong Keun Hyun*, Byoung Eon Lee*, Do Hoon Shin*†, Ji Hoon Kim**†

  • * Material & Process Technology, Korean Air Aero-Space Division, Busan, Korea
    ** School of Mechanical Engineering, Pusan National University, Busan, Korea

  • 시차주사열량계를 이용한 진공백 성형 프리프레그의 경화 거동 연구

  • 현동근* · 이병언* · 신도훈*† · 김지훈**†

References
  • 1. Park, D.C., Kim, T.G., Kim, S.H., Shin, D.H., Kim, H.W., and Han, J.W., “Evaluation of Physical and Mecahnical Properties based on Liquid Composite Molding,” Composites Research, Vol. 31, No. 6, 2018, pp. 304-310.
  •  
  • 2. Park, D.C., and Kim, Y.H., “Evaluation of Laminate Property Using Caulplate Application”, Journal of the Korean Society for Composite Materials, Vol. 29, No. 5, 2016, pp. 231-235.
  •  
  • 3. Marsh, G., “Airbus Takes on Boeing with Reinforced Plastic A350”, Reinforced Plastics, Vol. 51, Issue 11, 2007, pp. 26-29.
  •  
  • 4. Pora, J., “Composite Materials in the Airbus A380 – From History to Future-”, Proceeding of the 13 International Committee on Composite Materials, Beijing, China, 2001.
  •  
  • 5. Shin, D.H., Hyun, D.K., and Kim, Y.H., “Evaluation of Adhesive Failure Cases of L Joint Structures under Tensile Loading”, Inter-national Journal of Modern Physics B, Vol. 32, No. 19, 2018.
  •  
  • 6. Koushyar, H., “Effects of Variation in Autoclave Pressure, Cure Temperature, and Vacuum Application Time on the Porosity and Mechanical Properties of a Carbon/epoxy Composite,” Master Thesis, Wichita State University, USA, 2011.
  •  
  • 7. Hong, S.H., Song, M.H., Song, K.I., Baik, S.M., and Shin, S.J., “Fabrication and Evaluation of Integrated Composite Part for Air-craft using OoA Prepreg”, Journal of the Korean Society for Composite Materials, Vol. 29, No. 5, 2016, pp. 315-320.
  •  
  • 8. Mario Danzi, “Manufacturing of Polymer Composites OOA Prepreg Technology”, CMASLab, ETH Zűrich, 2017.
  •  
  • 9. Harshe, R., “A Review on Advanced Out-of-Autoclave Composite Processing”, Journal of the Indian Institute of Science, Vol. 95, No. 3, 2015.
  •  
  • 10. Cytec Engineered Materials, CYCOM 5320 Information Sheet.
  •  
  • 11. Kwon Hyuk, Out-Of-Autoclave Process using a Novel Semi-preg System for Aircraft Structures, Korea Aerospace University, Korea, 2014.
  •  
  • 12. Kratz, J., Hsiao, K., Fernlund, G., and Hubert, P., “Thermal Models for MTM45-1 and Cycom 5320 Out-of-autoclave Prepreg Res-ins”, Journal of Composite Materials, Vol. 47, 2013, pp. 341-352.
  •  
  • 13. Kim, D., Centea, T., and Nutt, S.R., “Out-time Effects on Cure Kinetics and Viscosity for an Out-of-autoclave (OOA) Prepreg: Modelling and Monitoring,” Composites Science and Technology, Vol. 100, 2014, pp. 63-69.
  •  
  • 14. Kwon, J.H., Park, H.J., Lee, E.J., Ku, S.M., Ki, S.H., and Lee, K.Y., “Study of the Curing Reaction Rate of a Glass Fiber Reinforced Bisphenol-A(BPA) Epoxy Prepreg by Differential Scanning Calorimetry (DSC)”, Composites Research, Vol. 31, No. 1, 2018, pp. 30-36.
  •  
  • 15. Johnston, A.A., An Integrated Model of the Development of Process-induced Deformation in Autoclave Processing of Composite Structure, University of British Columbia, Canada, 1997.
  •  
  • 16. Ridgard, C., “Process Selection and Optimization for Out of Autoclave Prepreg Structures”, CAMX2015, 2015.
  •  
  • 17. Hyun, D.K., Kim, D., Shin, J.W., Lee, B.E., Shin, D.H., and Kim, J.H., “Cure Cycle Modification for Efficient Vacuum Bag Only Prepreg Process,” Journal of Composite Material, Under Review
  •  
  • 18. ASTM E2160-04, Standard Test Method for Heat of Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry, 2018.
  •  
  • 19. Olivier, P.A., and Sawi, I.E., “Designing Curing Conditions in order to Analyse the Influence of Process-induced Stresses Upon Some Mechanical Properties of Carbon/epoxy Laminates at Constant Tg and Degree of Cure”, International Journal of Material Forming, Vol. 3(Suppl 2), 2010, pp. S1373-S1389.
  •  

This Article

Correspondence to

  • Do Hoon Shin*, Ji Hoon Kim**

  • * Material & Process Technology, Korean Air Aero-Space Division, Busan, Korea
    ** School of Mechanical Engineering, Pusan National University, Busan, Korea

  • E-mail: dohshin@koreanair.com, kimjh@pusan.ac.kr