Original Article
  • Test and Analysis of Triaxially Braided Composite Circular Arch under Three-Point Bending

  • Biruk F. Nega*, Kyeongsik Woo**†, Hansol Lee***

  • * Dept. of Civil Systems Engineering, Chungbuk National University
    **† School of Civil Engineering, Chungbuk National University

References
  • 1. Li, X., Binienda, W.K., and Goldberg, R.K., “Finite-element Model for Failure Study of Two-dimensional Triaxially Braided Composite,” Journal of Aerospace Engineering, Vol. 24, No. 2, 2010, pp. 170-180.
  •  
  • 2. Xu, L., Kim, S.J., Ong, C.H., and Ha, S.K., “Prediction of Material Properties of Biaxial and Triaxial Braided Textile Composites,” Journal of Composite Materials, Vol. 46, No. 18, 2012, pp. 2255-2270.
  •  
  • 3. Kosztowny, C.J., and Waas, A.M., “Buckling and Post-Buckling Behavior of Unitized, Stiffened Tri-Axially Braided Composite Textile Plates,” Proceeding of the 55th SDM Conference, Maryland, Jan. 2014.
  •  
  • 4. Potdar, S.A., and Bajad, M.N., “Design Method Prediction for Flexural Torsional Buckling Re-sistance of Steel Circular Arches-Box-Section”, Journal of Modern Engineering Research, Vol. 6, Iss. 7, 2016, pp. 8-14.
  •  
  • 5. Dou, C., Guo, Y.L., Zhao, S.Y., and Pi, Y.L., “Experimental Investigation into Flexural-torsional Ultimate Resistance of Steel Circular Arches,” Journal of Structural Engineering, Vol. 141, No. 10, 2015, pp. 1-12.
  •  
  • 6. Guo, Y.L., Zhao, S.Y., Pi, Y.L., Bradford, M.A., and Dou, C., “An Experimental Study on Out-of-plane Inelastic Buckling Strength of Fixed Steel Arches,” Engineering Structures, Vol. 98, 2015, pp. 118-127.
  •  
  • 7. Barbero, E., and Tomblin, J., “Euler Buckling of Thin-walled Composite Columns,” Thin-walled Structures, Vol. 17, No. 4, 1993, pp. 237-258.
  •  
  • 8. Qiao, P., Zou, G., and Davalos, J.F., “Flexural–torsional Buckling of Fiber-reinforced Plastic Composite Cantilever I-beams,” Composite Structures, Vol. 60, No. 2, 2003, pp. 205-217.
  •  
  • 9. Omidvar, B., and Ghorbanpoor, A., “Nonlinear FE Solution for Thin-walled Open-section Composite Beams,” Journal of Structural Engineering, Vol. 122, No. 11, 1996, pp. 1369-1378.
  •  
  • 10. ASTM E1856-13, “Standard Guide for Evaluating Computerized Data Acquisition Systems Used to Acquire Data from Universal Testing Machines,” ASTM International, West Conshohocken, PA, 2013.
  •  
  • 11. Hassan, N.K., and Mosallam, A.S., “Buckling and Ultimate Failure of Thin-walled Pultruded Composite Columns,” Polymers and Polymer Composites, Vol. 12, No. 6, 2004, pp. 469-481.
  •  
  • 12. Lee, J.H., and Kim, S.E., “Flexural–torsional Buckling of Thin-walled I-section Composites,” Computers & Structures, Vol. 79, No. 10, 2001, pp. 987-995.
  •  
  • 13. Arbelo, M.A., Kalnins, K., Ozolins, O., Skukis, E., Castro, S.G.P., and Degenhardt, R., “Experimental and Numerical Estimation of Buckling Load on Unstiffened Cylindrical Shells Using a Vibration Correlation Technique,” Thin-Walled Structures, Vol. 94, 2015, pp. 273-279.
  •  
  • 14. Hosseini-Toudeshky, H., Hosseini, S., and Mohammadi, B., “Delamination Buckling Growth in Laminated Composites Using Layerwise-interface Element,” Composite Structures, Vol. 92, No. 8, 2010, pp. 1846-1856.
  •  
  • 15. Schenk, C.A., and Schuëller, G.I., “Buckling Analysis of Cylindrical Shells with Random Geometric Imperfections,” International Journal of Non-Linear Mechanics, Vol. 38, No. 7, 2003, pp. 1119-1132.
  •  
  • 16. Sadovský, Z., Kriváček, J., Ivančo, V., and Ďuricová, A., “Computational Modelling of Geometric Imperfections and Buckling Strength of Cold-formed Steel,” Journal of Constructional Steel Research, Vol. 78, 2012, pp. 1-7.
  •  
  • 17. Mekonnen, A.A., and Woo, K., “Effects of Defects on Effective Material Properties of Triaxially Braided Textile Composite”, Submitted to International Journal of Aeronautical and Space Sciences, 2019.
  •  
  • 18. ASTM D3039/D3039M-17, “Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials,” ASTM International, West Conshohocken, PA, 2017.
  •  
  • 19. Alpha STAR Corporation, MCQ-Composites Theoretical Manual, Alpha STAR Corporation, 2014.
  •  
  • 20. Geleta, T.N., Woo, K.S., and Lee, B.H., “Prediction of Effective Material Properties for Triaxially Braided Textile Composite,” International Journal of Aeronautical and Space Sciences, Vol. 18, No. 2, 2017, pp. 222-235.
  •  

This Article

Correspondence to

  • Kyeongsik Woo

  • School of Civil Engineering, Chungbuk National University

  • E-mail: kw3235@chungbuk.ac.kr