Original Article
  • Shear Experiment and Simulation Analysis at Bonded Surface of Specimen Tapered Double Cantilever Beam with Expanded Aluminum
  • Hong-Peng Sun*, Seong S. Cheon**, Jae-Ung Cho**†
  • *Department of Mechanical Engineering, Graduate School, Kongju University **Division of Mechanical & Automotive Engineering, Kongju University **†Division of Mechanical & Automotive Engineering, Kongju University, Corresponding author (E-mail: jucho@kongju.ac.kr)
  • 발포 알루미늄으로 된 경사진 이중외팔보 시험편의 접착면에서의 전단 실험 및 시뮬레이션 해석
  • 손홍붕* , 전성식** , 조재웅**†
Abstract
ABSTRACT: In this study, tapered double cantilever beam specimens are designed with the variable of angle toinvestigate the fracture property at the bonded surface of adjoint structure. These specimens are made with four kindsof models as the length of 200 mm and the slanted angles of bonded surfaces on specimens of 6°, 8°, 10° and 12°. Byinvestigating experiment and analysis result of these specimens, the maximum loads are happened at 120 N, 137 N,154 N and 171 N respectively in cases of the specimens with slanted angles of 6°, 8°, 10° and 12°. As the analysisresult approach the experimental value, it is confirmed to have no much difference with the values of experiment andanalysis. It is thought that the material property can be investigated effectively on shear behavior of the materialcomposed of aluminum foam bonded with adhesive through simulation instead of experiment by applying this studymethod.

초 록: 본 연구에서는 발포 알루미늄으로 구성된 접착 구조물에서의 접합면에 대한 파괴 특성을 조사하기 위하여 각도를 변수로 정하고 TDCB 시험편을 설계하였다. 이 시험편들은 길이는 200 mm이고 시험편에 대한 접착면의 경사 각도는 6°, 8°, 10°와 12°인 네 가지로 모델링을 하였다. 이 시험편들의 실험 및 해석을 분석한 결과, 경사면각도가 6°, 8°, 10°와 12°인 경우에 시험편들의 최대 하중은 각각 약 120 N, 137 N, 154 N과 171 N으로 발생하였다. 해석의 결과 값이 실험치에 가까워져 많은 차이를 보이지 않는 것을 확인할 수 있다. 따라서 이와 같은 연구 방법을응용하여 실험 대신 시뮬레이션을 통하여 접착제로 접착된 알루미늄 폼으로 된 재료의 전단 거동에 관한 물성치를 효율적으로 파악할 수 있다고 사료된다.

Keywords: Aluminum foam, Bonded interface, Displacement, Porous core, Reaction force, Tapered double cantilever beam specimen

Keywords: 알루미늄 폼, 접착 계면, 변위, 다공성 심재, 반력, TDCB 시험편

This Article

  • 2014; 27(6): 248-253

    Published on Dec 31, 2014

Correspondence to

  • E-mail: