Original Article
  • Thermo-mechanical Finite Element Analysis of Process-induced Deformation during Press Forming of Thermoplastic Composites
  • Joongwon Lee*, Woo-Ju Lee*, Byeong-Su Kwak*, Sung-Ha Ji*, **, Hyun-Woo Ju**, Hyoung Jun Lim*†

  • * School of Mechanical and Aerospace Engineering, Gyeongsang National University, Jinju
    ** Korea Aerospace Industries, Ltd.

  • 프레스 포밍 공정 기반 열가소성 복합재 제작 시 발생하는 공정유도변형의 열-기계적 유한요소 해석
  • 이중원* · 이우주* · 곽병수* · 지성하*, ** · 주현우** · 임형준*†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

In this study, a crystallization-coupled thermo-mechanical finite element model was developed to predict process-induced deformation, namely spring-in, during the press forming of thermoplastic composites. The novelty of the model is that PPS crystallization kinetics, crystallization heat generation, crystallinity-dependent matrix properties, temperature-dependent thermal expansion, and homogenized composite properties are linked in a single process-analysis flow. An aircraft rib structure was analyzed, and the predicted deformation was used to design a compensated mold by inverse deformation. The compensated mold was manufactured and evaluated using 3D scan measurements; the average angular difference between the simulation and fabricated product was 0.56°. These results show that the proposed approach can predict process-induced deformation before mold fabrication and reduce trial-and-error mold correction for thermoplastic composite parts.


본 연구에서는 프레스 포밍 공정 중 열가소성 복합재에 발생하는 spring-in을 예측하기 위해 결정화 연계 열-기계적 유한요소 해석 모델을 구축하였다. 본 모델의 차별성은 PPS 수지의 결정화 동역학, 결정화 발열, 결정화도 의존 수지 물성, 온도 의존 열팽창, 기하학적 균질화 기반 복합재 물성 갱신을 하나의 공정 해석 흐름으로 연계한 점에 있다. 항공기용 리브 형상을 대상으로 성형 및 냉각 거동과 탈형 후 변형을 예측하였으며, 해석 결과를 이용하여 역변형이 적용된 보정 몰드를 설계·제작하였다. 제작품의 3D scan 측정값과 해석값을 비교한 결과 평균 각도 오차는 0.56°로 나타났다. 따라서 제안한 해석 절차는 열가소성 복합재 프레스 포밍 부품의 공정유도변형을 사전에 예측하고 반복적인 몰드 수정 과정을 줄이는 데 활용될 수 있다.


Keywords: 열가소성 복합재(Thermoplastic composite), 프레스 포밍(Press forming), 공정유도변형(Process-induced deformation), 유한요소 해석(Finite element analysis)

This Article

Correspondence to

  • Hyoung Jun Lim
  • School of Mechanical and Aerospace Engineering, Gyeongsang National University, Jinju

  • E-mail: hj.lim@gnu.ac.kr