Original Article
  • Development of Static Charge Patterning Process with Electrostatic Charge Injection for Invisible Information Recording
  • Seonmin Yu*, Yoonsang Ra**† , Dongwhi Choi*†

  • * Department of Mechanical Engineering, Kyung Hee University
    ** School of Mechanical Engineering, Chonnam National University

  • 비가시성 정보 기록을 위한 정전하 삽입 기반 전하 패터닝 공정 개발
  • 유선민* · 라윤상**† · 최동휘*†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

Technologies that record information by patterning the surface of a material, such as barcodes, have become ubiquitous tools for conveying and identifying data. However, next-generation industries demand more advanced strategies in terms of applicability, security, and functionality. Herein, we propose a Static Charge Patterning (SCP) process capable of forming the triboelectric barcode (Tribar-code), an invisible information carrier. The SCP process records information by selectively injecting electrostatic charges onto the surface of a polymer film via corona discharge, thereby forming charge patterns. The resulting Tribar-code is indistinguishable to the naked eye and involves neither surface damage nor structural modification of the material. When formed on a transparent polymer film, the Tribar-code exhibits a visible-light transmittance of 95.05%, and a significant surface potential difference of 1.45 kV between the static charge patterns and the pristine parts is maintained for more than seven days. Furthermore, the stored information can be erased and rewritten on demand through a simple re-patterning procedure. The Tribar-code can be read out through a self-powered mechanism based on the free-standing sliding mode of a triboelectric nanogenerator. A code reader converts the width of each static charge pattern into the peak-to-peak time interval of the output voltage, enabling 250 distinct pattern combinations from the Tribar-code. As a proof-of-concept demonstration, a Tribar-code-based personal identification system employing a convolutional neural network achieved an accuracy of 99.7%, confirming its applicability in future industries.


바코드와 같이 소재의 표면에 정보를 패턴화하여 기록하는 기술은 데이터를 전달 및 식별하는 보편적인 도구가 되고 있음. 그러나 차세대 산업에서는 활용성, 보안, 기능적 측면에서 더 진보된 전략이 요구됨. 이에 본 연구에서는 비가시성 정보 매체인 triboelectric barcode (Tribar-code)를 형성할 수 있는 Static Charge Patterning (SCP) 공정을 제안하는 바임. SCP 공정은 코로나 방전을 기반으로 폴리머 필름의 표면에 선택적으로 정전하를 삽입하여 패턴을 형성함으로써 정보를 기록하는 공정임. 이렇게 형성된 Tribar-code는 육안으로 구별할 수 없으며, 소재의 표면 손상이나 구조 변화를 수반하지 않음. Tribar-code는 투명한 폴리머 필름위에 형성되었을 경우 95.05%의 가시광 투과율을 보이며, 정전하 패턴 부분과 미처리 부분 사이에 1.45 kV의 유의미한 표면 전위차가 7일 이상 유지됨을 확인하였음. 또한 저장된 정보는 간단한 재패터닝 절차를 통해 사용자 요구에 따라 삭제 및 재기록 될 수 있음. Tribar-code는 free-standing sliding 모드의 triboelectric nanogenerator 원리를 통해 자가발전 메커니즘으로 읽어낼 수 있음. 코드 리더기가 정전하 패턴의 폭을 출력 전압의 peak-to-peak 시간간격으로 변환하며, 이를 통해 Tribar-code로부터 250가지의 서로 다른 패턴 조합을 제공함. 개념 시연을 위해 구축한 Tribar-code 기반 개인 식별 시스템은 합성곱 신경망을 적용하여 99.7%의 정확도를 보였으며, 미래 산업에서의 활용성을 확인할 수 있었음.


Keywords: 비가시성 정보 매체(Invisible information carrier), 정전하 삽입 패터닝(Electrostatic charge injection patterning), 전기적 표면 개질(Electrical surface modification), 자가발전형 식별(Self-powered identification)

This Article

Correspondence to

  • Yoonsang Ra** , Dongwhi Choi*
  • * Department of Mechanical Engineering, Kyung Hee University
    ** School of Mechanical Engineering, Chonnam National University

  • E-mail: yra87@jnu.ac.kr (Y. Ra), dongwhi.choi@khu.ac.kr (D