Hyun-Jun Choi*, Han-Jun Seo*, Jong-Gyeong Yoo**, Min-Je Hwang**, Hyun-Seok Lee**, Young-Woo Nam*, ***†
* Graduate School of Aerospace and Mechanical Engineering, Korea Aerospace University
** Low Observability Technology Team, Korea Aerospace Industries Ltd
*** Aeronautics Major, College of Engineering, Korea Aerospace University
최현준* · 서한준* · 유종경** · 황민제** · 이현석** · 남영우*, ***†
This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
This study proposes a 3D-printed gradient-index (GRIN) Gyroid Luneburg lens reflector for passive radar cross-section (RCS) enhancement in the X-band (8–12 GHz). The reflector consists of a GRIN Gyroid Luneburg lens, a perfect electric conductor (PEC) reflector, a support, and a mount. The required layer-wise permittivity distribution was realized by controlling the volume fraction and wall thickness of the Gyroid structure, while an integrated single-material design was adopted to improve 3D-printing manufacturability. The effective permittivity at different volume fractions was evaluated through electromagnetic simulations and measurements and used to construct the GRIN lens. Electromagnetic performance was assessed using RCS simulations of both an effective-permittivity model and a geometrically resolved Gyroid model, followed by comparison with measured RCS results. The results demonstrate that the 3D-printed Gyroid structure can realize the required GRIN permittivity distribution and that the proposed reflector is suitable as a passive X-band RCS enhancement structure.
이 논문에서는 X-band (8–12 GHz)에서 수동형 레이더 반사 단면적(Radar Cross Section, RCS)을 증가시키기 위한 3D 프린팅 기반 GRIN Gyroid Luneburg Lens 반사체를 제안하였다. 제안한 반사체는 GRIN Gyroid Luneburg Lens와 PEC 반사판 및 지지 구조로 구성되며, Gyroid 내부 형상의 공간적 변화를 통해 요구되는 유효유전율 구배를 구현하였다. 또한 단일 열가소성 수지를 적용한 일체형 구조로 설계하여 복잡한 내부 형상의 구현 가능성과 3D 프린팅 제작성을 확보하였다. Gyroid 구조의 유효유전율 특성은 전자기 해석과 시편 측정을 통해 검토하였으며, 이를 바탕으로 GRIN 유전율 분포의 구현 가능성을 평가하였다. 전자기 성능은 유효유전율이 적용된 등가 모델과 실제 Gyroid 형상 모델의 RCS 해석을 통해 비교하였으며, 제작 시제품의 RCS 측정 결과와 함께 반사 특성의 경향성을 검토하였다. 그 결과, 3D 프린팅 Gyroid 구조를 이용하여 요구되는 GRIN 유전율 분포를 구현할 수 있음을 확인하였으며, 제안한 반사체의 X-band 수동형 RCS 출력 강화 구조로 적용될 수 있음을 확인하였다.
Keywords: 레이더 반사 단면적 증강(Radar Cross-Section Enhancement), 적층 제조(Additive Manufacturing), Luneburg Lens 반사체(Luneburg Lens Reflector), 굴절률 구배 렌즈(Gradient-Index Lens)
This Article2026; 39(5): 561-577
Published on Oct 31, 2026
Correspondence to* Graduate School of Aerospace and Mechanical Engineering, Korea Aerospace University
*** Aeronautics Major, College of Engineering, Korea Aerospace University