Original Article
  • Recent Advances in Polymeric Composite Membrane Materials for Semiconductor Wastewater Treatment
  • Goum Min*, Juhyuk Park*†

  • * Department of Materials Science and Engineering, Seoul National University, Seoul 08826, Republic of Korea

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

Semiconductor manufacturing generates wastewater containing particulate and dissolved contaminants from chemical mechanical polishing (CMP), back-grinding, photolithography, cleaning, and etching processes. Polymeric membranes are widely used because their pore structure, surface properties, and selective layers can be controlled according to target contaminants. Polyvinylidene fluoride (PVDF) and polyethersulfone (PES) ultrafiltration (UF) membranes mainly remove fine particles and colloids, while polyamide (PA)-based nanofiltration (NF) and reverse osmosis (RO) membranes remove dissolved ions and low-molecular-weight contaminants such as tetramethylammonium hydroxide (TMAH). However, membrane fouling, scaling, and the permeability-selectivity trade-off remain major limitations. To address these issues, hydrophilic modification and polymer composite membranes containing functional materials have been investigated. Some modified UF and thin-film nanocomposite (TFN) membranes have also been applied to actual semiconductor wastewater treatment. This review summarizes the structures and separation characteristics of polymeric membranes used in semiconductor wastewater treatment and discusses recent developments in functional modification, composite membrane design, and their potential for wastewater treatment and water reuse.


Keywords: Semiconductor wastewater, Polymeric membrane, Ultrafiltration, Reverse osmosis, Polymer composite membrane

This Article

Correspondence to

  • Juhyuk Park
  • Department of Materials Science and Engineering, Seoul National University, Seoul 08826, Republic of Korea

  • E-mail: juhyukp@snu.ac.kr