Original Article
  • Effects of Shellac Content on the Structure and Properties of PBAT/Shellac Biodegradable Blend Films
  • Hwan-Gi Do*, Beom-Gon Cho*†

  • * Department of Polymer Science and Engineering, Kumoh National Institute of Technology

  • Shellac 함량에 따른 PBAT/Shellac 생분해성 블렌드 필름의 구조 및 물성 변화
  • 도환기* · 조범곤*†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

To expand the application range of biodegradable polymers, their properties need to be controlled for specific applications, and blending with materials of distinct characteristics has been extensively investigated as a strategy for property modification. Poly(butylene adipate-co-terephthalate) (PBAT) is a biodegradable polymer with excellent flexibility and processability that is widely used as a film material, and its structure and properties can be controlled through blending with various materials. Shellac is a naturally derived resin containing various polar functional groups and may influence intermolecular interactions as well as the structure and properties of PBAT films depending on the blend composition. In this study, PBAT/shellac blend films with varying shellac contents were prepared, and changes in their structural, thermal, surface, and mechanical properties with composition were analyzed. The chemical structure and intermolecular interactions were analyzed using Fourier transform infrared spectroscopy (FT-IR), while crystallization and melting behaviors and thermal degradation characteristics were evaluated using differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). In addition, the microstructure and surface characteristics of the films were analyzed using scanning electron microscopy (SEM) and water contact angle measurements, respectively, and their mechanical properties were evaluated by tensile testing. The results confirmed that the shellac content is a major factor influencing the structure and properties of PBAT-based blend films.


생분해성 고분자의 적용 범위를 확대하기 위해서는 용도에 따른 물성 제어가 요구되며, 이를 위한 방법으로 상이한 특성을 갖는 소재와의 블렌딩이 활발히 연구되고 있다. Poly(butylene adipate-co-terephthalate) (PBAT)는 우수한 유연성과 가공성을 갖는 생분해성 고분자로 필름 소재에 널리 활용되고 있으며, 다양한 소재와의 블렌딩을 통해 구조 및 물성을 조절할 수 있다. Shellac은 다양한 극성 작용기를 포함하는 천연 유래 수지로, PBAT와의 블렌딩 시 조성에 따라 분자간 상호작용과 필름의 구조 및 물성에 영향을 미칠 수 있다. 본 연구에서는 shellac의 함량을 달리한 PBAT/shellac 블렌드 필름을 제조하고 조성에 따른 구조적, 열적, 표면 및 기계적 특성의 변화를 분석하였다. 푸리에 변환 적외선 분광법을 이용하여 화학구조와 분자간 상호작용을 분석하였으며, 시차주사열량계와 열중량분석을 통해 결정화 및 용융 거동과 열분해 특성을 평가하였다. 또한, 주사전자현미경과 접촉각 측정을 이용하여 미세구조와 표면 특성을 분석하고 인장시험을 통해 필름의 기계적 특성을 측정하였다. 이를 통해 shellac 함량이 PBAT 기반 블렌드 필름의 구조 및 물성 변화에 영향을 미치는 주요 인자임을 확인하였다.


Keywords: Poly(butylene adipate-co-terephthalate), 쉘락(Shellac), 고분자 블렌드(Polymer blend), 필름 용액 주조(Film solution casting), 생분해성 필름(Biodegradable film)

This Article

Correspondence to

  • Beom-Gon Cho
  • Department of Polymer Science and Engineering, Kumoh National Institute of Technology

  • E-mail: bgcho@kumoh.ac.kr