Original Article
  • Development of Triboelectric Nanogenerator with Bio-Inspired Escapement Regulation for Intermittent Wind Energy Harvesting
  • Yu-seop Kim*, Seonmin Yu*, Yoonsang Ra**†, Dongwhi Choi*†

  • * Department of Mechanical Engineering, Kyung Hee University
    ** School of Mechanical Engineering, Chonnam National University

  • 자연모사 탈진기 메커니즘 기반 간헐적 바람 에너지 수확을 위한 출력 균일화 정전발전 소자 개발
  • 김유섭* · 유선민* · 라윤상**† · 최동휘*†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

Wind energy is ambient and accessible mechanical energy sources for self-powered systems; however, its intermittent and fluctuating characteristics often cause unstable electrical output in wind-driven triboelectric nanogenerators (TENG). Herein, we propose an escapement-based triboelectric nanogenerator (E-TENG) with a bio-inspired energy storage–release mechanism of biological systems. In the E-TENG system, transient wind input is converted into rotational motion by wind blades, amplified through a reduction gear, and stored as elastic energy in a mainspring. The stored energy is sequentially released by an escapement mechanism, producing repetitive and regulated contact–separation motion of the TENG. The mechanical and electrical characteristics of the E-TENG are systematically investigated by varying the twisting angle and stiffness of the mainspring. Under a wind speed of 18 m/s, the E-TENG reached a mainspring twisting angle of 350° after only 2.4 s of wind input and maintained electrical generation for 81 s. Compared with a conventional rotary TENG directly driven by wind, the E-TENG exhibited higher and more sustained output generation. Considering proposed escapement-based mechanical regulation strategy, E-TENG expected to utilize as continuous power supplier for prolonged operation of self-powered distributed electronic systems.


풍력 에너지는 자가발전 시스템에 활용 가능한 대표적인 주변 기계적 에너지원 중 하나이지만, 간헐적이고 변동성이 큰 특성으로 인해 풍력 구동 정전발전 소자에서 불안정한 전기 출력을 유발할 수 있다. 본 연구에서는 생체 시스템의 에너지 저장–방출 메커니즘을 모사한 탈진기 기반 정전발전 소자(E-TENG)를 제안한다. 제안된 E-TENG 시스템에서 순간적인 풍력 입력은 블레이드를 통해 회전 운동으로 변환되고, 감속기를 통해 증폭된 후 주 스프링에 탄성에너지 형태로 저장된다. 이후 저장된 에너지는 탈진기 메커니즘을 통해 순차적으로 방출되며, 이를 통해 마찰전기 발전부에 반복적이고 제어된 접촉 및 분리 운동을 제공한다. E-TENG의 기계적 및 전기적 특성은 주 스프링의 비틀림 각도와 강성을 변화시키며 체계적으로 평가하였다. 그 결과, E-TENG는 18 m/s의 풍속 조건에서 2.4 s의 풍력 입력만으로 주 스프링 비틀림 각도 350°에 도달하였으며, 이후 81 s 동안 지속적인 전기 출력을 생성하였다. 또한 기존의 회전형 정전발전 소자와 비교하였을 때, E-TENG는 지속적으로 구동하여 향상된 출력 생성 특성을 나타내었다. 이러한 결과는 탈진기 기반 출력 균일화 전략이 간헐적인 풍력 에너지를 지속적인 전기적 출력으로 변환하는 데 효과적임을 나타내며, 장시간 구동이 요구되는 분산형 시스템의 전원 공급원으로 활용될 수 있음을 시사한다.


Keywords: 자연모사 설계(Bio-inspired design), 기계적 균일화(Mechanical regulation), 탈진기 메커니즘(Escapement mechanism), 바람 에너지 하베스팅(Wind energy harvesting), 정전발전 소자(Triboelectric nanogenerator)

This Article

Correspondence to

  • Yoonsang Ra**, Dongwhi Choi*
  • * Department of Mechanical Engineering, Kyung Hee University
    ** School of Mechanical Engineering, Chonnam National University

  • E-mail: yra87@jnu.ac.kr (Y. Ra), dongwhi.choi@khu.ac.kr (D