Hyukjin Park*#, Seongmin Na*#, Jaeyeon An*#, Kyungwho Choi*†, Dukhyun Choi*†
* School of Mechanical Engineering, Sungkyunkwan University
박혁진*# · 나성민*# · 안재연*# · 최경후*† · 최덕현*†
This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
This study presents a self-adaptive hybrid energy harvesting system that combines a triboelectric nanogenerator (TENG) and an electromagnetic generator (EMG) through a snap-through buckling-based mechanical switch. The TENG is advantageous in a low-frequency regime, whereas the EMG becomes effective at higher frequencies because the optimized output powers of the TENG and EMG are proportional to frequency and the square of frequency, respectively. To prevent EMG operation in the low-speed range, where electromagnetic induction can generate rotational resistance, the proposed mechanical switch passively activates the EMG above a specific rotational speed. The critical load of the switch was predicted using finite element modeling and verified experimentally, showing a maximum error of 4.9%. The fabricated system activated the EMG at approximately 340 RPM and demonstrated rotational-speed-dependent switching between TENG-only and TENG-EMG hybrid operation.
본 연구에서는 마찰대전 발전기(triboelectric nanogenerator, TENG)와 전자기 발전기(electromagnetic generator, EMG)의 주파수 의존적 출력 특성을 활용하기 위해 스냅스루 좌굴(snap-through buckling) 기반 기계식 스위치를 적용한 자가적응형 하이브리드 에너지 하베스팅 시스템을 제안하였다. TENG의 최적 출력은 주파수에 비례하고 EMG의 최적 출력은 주파수의 제곱에 비례하므로, 저주파 영역에서는 TENG가 유리하고 고주파 영역에서는 EMG가 효과적으로 작동한다. 저속 영역에서 EMG가 지속적으로 작동할 경우 전자기 유도에 의한 회전 저항이 발생할 수 있으므로, 특정 회전 속도 이상에서만 EMG가 활성화되는 수동형 스위치를 적용하였다. 유한요소해석과 실험을 통해 스위치 임계하중을 검증하였고, 최대 오차는 4.9%였다. 제작된 시스템은 약 340 RPM에서 EMG를 활성화하여 저속에서는 TENG 단독, 고속에서는 TENG-EMG 하이브리드 작동을 구현하였다.
Keywords: 마찰대전 발전기(Triboelectric nanogenerator), 전자기 발전기(Electromagnetic generator), 에너지 하베스팅(Energy harvesting), 스냅스루 좌굴(Snap-through buckling), 기계식 스위치(Mechanical switch)
This Article2026; 39(5): 518-524
Published on Oct 31, 2026
Correspondence toSchool of Mechanical Engineering, Sungkyunkwan University