Original Article
  • Correlation between Crystallization and Mechanical Behavior of Polyphenylene Sulfide Composites with High Loading of Glass Fiber
  • Beom-Gon Cho*†

  • * Department of Polymer Science and Engineering, Kumoh National Institute of Technology

  • 고함량 GF를 함유한 PPS 복합재의 결정화 및 기계적 거동 상관 분석
  • 조범곤*†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

Poly (phenylene sulfide) (PPS) is a high-performance engineering plastic with excellent rigidity, chemical resistance, and electrical insulation properties. Meanwhile, PPS composites with high glass fiber (GF) content enhance the mechanical properties of PPS, expanding its application potential. However, the crystallinity and mechanical properties of PPS/GF composites have been found to vary depending on the mold temperature during injection molding process. In this study, PPS composites with high loading of GF (65 wt.%) were fabricated via injection molding under different mold temperatures to investigate their mechanical and crystalline properties. The results indicate that higher mold temperatures allow sufficient crystallization time, leading to increased crystallinity. This enhanced crystallinity contributes to improved mechanical performance, as demonstrated by higher tensile strength, flexural strength, and hardness. Fracture surface analysis of 3-point bending-tested specimens provided insights into GF orientation and micropore morphology. These findings contribute to optimizing the processing conditions of PPS/GF composites, making them more suitable for high-performance capacitor housing applications.


Polyphenylene sulfide(PPS)는 우수한 강성, 내화학성 및 전기 절연성을 갖춘 고성능 엔지니어링 플라스틱이다. 한편, 유리섬유(GF) 함량이 높은 PPS 복합재는 PPS의 기계적 특성을 향상시켜 응용 가능성을 넓히고 있다. 그러나 PPS/GF 복합재의 결정화도와 기계적 특성은 사출 성형 공정 중 금형 온도에 따라 달라지는 것으로 알려져 있다. 본 연구에서는 다양한 금형 온도에서 사출 성형을 통해 65 wt.%의 고함량의 유리섬유를 함유한 PPS 복합재를 제작하고 그 기계적 및 결정화 특성을 조사했다. 연구 결과, 금형 온도가 높을수록 충분한 결정화 시간을 확보하여 결정화도가 증가하는 것을 확인했다. 이러한 결정화도 증가는 인장 강도, 굴곡 강도 및 경도의 증가로 나타나는 기계적 성능 향상에 기여했다. 3점 굽힘 시험을 통해 얻은 시편의 파단면 분석을 통해 유리섬유의 배향 및 미세 기공 형태를 파악할 수 있었다. 본 연구 결과는 PPS/GF 복합재의 가공 조건을 최적화하여 고성능 커패시터 하우징 응용 분야에 더욱 적합하게 만드는 데 기여할 것이다.


Keywords: 폴리페닐렌 설파이드(Poly (phenylene sulfide) (PPS)), 복합재료(Composite), 유리섬유(Glass fiber), 금형온도(Mold temperature), 결정화도(Crystallinity), 기계적 물성(Mechanical property)

This Article

Correspondence to

  • Beom-Gon Cho
  • Department of Polymer Science and Engineering, Kumoh National Institute of Technology

  • E-mail: bgcho@kumoh.ac.kr