Original Article
  • Melt-Spinnable PAN-Based Carbon Fiber Precursors: Technology Trends and Composite Applications
  • Seonghwan Lee*, Seo Gyun Kim*, Duck Joo Yang**†, Bon-Cheol Ku*, ***, ****†

  • * Institute of Advanced Composite Materials, Korea Institute of Science and Technology (KIST), Jeonbuk 55324, Republic of Korea
    ** Department of Chemistry & Biochemistry, The University of Texas at Dallas, Richardson, Texas 75080, USA
    *** Department of JBNU-KIST Industry-Academia Convergence Research, Graduate School, Jeonbuk National University, 54896, Republic of Korea
    **** Department of Mechanical Engineering, The University of Texas at Dallas, Richardson, Texas 75080, USA

  • 용융방사 가능한 폴리아크릴로니트릴(PAN) 기반 탄소섬유 전구체 기술 동향 및 복합소재 응용
  • 이성환* · 김서균* · 양덕주**† · 구본철*, ***, ****†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

Melt spinning has attracted considerable attention as a promising alternative for carbon fiber precursor production. It eliminates the solvent dissolution of the precursor polymer, as well as the coagulation, washing, and solvent recovery steps required in conventional solution spinning. As a result, melt spinning offers higher productivity, lower manufacturing costs, and a more environmentally friendly process. Despite these advantages, direct melt spinning of polyacrylonitrile (PAN) remains intrinsically challenging. PAN begins to cyclize at approximately 260–270 °C, well below its melting temperature of about 300°C. This fundamental thermal incompatibility has led to the development of several melt-spinnable PAN precursor technologies. These technologies are based on three principal strategies: (1) internal plasticization through copolymerization, (2) external plasticization using water, organic plasticizers, or environmentally benign plasticizers, and (3) irradiation-assisted crosslinking and partial cyclization using ultraviolet (UV) or electron-beam irradiation to suppress fiber melting during thermo-oxidative stabilization (TOS). This review summarizes the design principles of melt-spinnable PAN-based precursors. It discusses the key challenges in stabilization and carbonization. It also reviews representative research advances, resulting mechanical properties, and the opportunities and limitations of irradiation-assisted stabilization. Particular attention is given to irradiation strategies developed specifically for melt-spinnable PAN precursors. These approaches are distinguished from post-treatment methods applied to conventional wet-spun or textile-grade PAN fibers. From a process–structure–property perspective, this review examines copolymer composition and plasticization conditions for establishing a processing window and highlights the need for its quantitative definition. It also discusses design directions for mitigating pores and surface defects associated with plasticizer diffusion and removal, as well as for selecting irradiation and subsequent TOS conditions. Finally, this review presented the potential applications of melt-spun PAN-based carbon fibers in advanced structural composites and multifunctional materials.


용융방사는 탄소섬유 전구체 제조를 위한 유망한 대체 공정으로 주목받고 있다. 기존 용액방사 공정에서 필수적인 전구체 고분자의 용해, 응고, 세척 및 용매 회수 공정을 생략할 수 있어 생산성을 향상시키고 제조비용을 절감할 수 있을 뿐만 아니라, 보다 친환경적인 제조공정 구현이 가능하다. 그러나 폴리아크릴로니트릴(polyacrylonitrile, PAN)은 약 260–270°C에서 분자 사슬의 고리화(cyclization)가 시작되는 반면, 용융온도는 약 300°C 이상으로 직접 용융방사가 본질적으로 어렵다. 이러한 열적 불일치를 극복하기 위해 다양한 용융방사형 PAN 전구체 제조기술이 개발되어 왔으며, 크게 (1) 공중합을 통한 내부 가소화(internal plasticization), (2) 물, 유기 가소제 또는 친환경 가소제를 이용한 외부 가소화(external plasticization), (3) 자외선(UV) 또는 전자선(electron beam)을 이용한 조사 기반 가교 및 부분 고리화를 통해 열산화 안정화(thermo-oxidative stabilization, TOS) 과정에서 섬유의 용융을 억제하는 방법으로 구분할 수 있다. 본 리뷰에서는 용융방사가 가능한 PAN 기반 전구체의 설계 원리를 체계적으로 정리하고, 안정화 및 탄화 공정에서의 주요 기술적 과제를 고찰한다. 또한 대표적인 연구 사례와 제조된 탄소섬유의 기계적 특성을 비교·분석하고, 조사 기반 안정화 기술의 적용 가능성과 한계를 종합적으로 논의한다. 특히 용융방사형 PAN 전구체를 대상으로 개발된 조사 기반 안정화 기술과 기존 습식방사 또는 textile-grade PAN 섬유에 적용된 후처리 기술을 명확히 구분하여 정리하였다. 아울러 공정–구조–물성(process–structure–property) 관점에서 공정 윈도우(processing window) 확보를 위한 공중합 조성 및 가소화 조건을 고찰하고, 공정 윈도우의 정량화 필요성을 제시하였다. 또한 가소제의 확산·제거에 따른 기공 및 표면 결함과 조사 조건 및 후속 열산화 안정화 조건의 설계 방향을 논의하였다. 마지막으로 용융방사 기반 PAN 탄소섬유의 첨단 구조용 복합재료 및 다기능성 소재 분야에서의 활용 가능성과 향후 연구 방향을 제시하였다.


Keywords: 탄소 섬유(Carbon fibers), 용융 방사(Melt spinning), 폴리아크릴로니트릴(Polyacrylonitrile, PAN), 열산화 안정화(Thermo-oxidative stabilization, TOS), 가소화(Plasticization), 조사 전처리(Irradiation pretreatment)

This Article

Correspondence to

  • Duck Joo Yang**, Bon-Cheol Ku*, ***, ****
  • * Institute of Advanced Composite Materials, Korea Institute of Science and Technology (KIST), Jeonbuk 55324, Republic of Korea
    ** Department of Chemistry & Biochemistry, The University of Texas at Dallas, Richardson, Texas 75080, USA
    *** Department of JBNU-KIST Industry-Academia Convergence Research, Graduate School, Jeonbuk National University, 54896, Republic of Korea
    **** Department of Mechanical Engineering, The University of Texas at Dallas, Richardson, Texas 75080, USA

  • E-mail: djyang@utdallas.edu, cnt@kist.re.kr