Original Article
  • Design of a Broadband Radar Absorbing Sandwich Composite Structure Using PEEK/MWNTs 3D-printed Thickness-gradient Honeycomb Core
  • Seung-Hyeon Kang*, Jae-Won Shim*, Hyun-Jun Choi*, Jong-Gyeong Yoo**, O-bum Kwon**, Min-Je Hwang**, Young-Woo Nam*,***†

  • * Graduate School of Aerospace and Mechanical Engineering, Korea Aerospace University
    ** Low Observability Technology Team, Korea Aerospace Industries Ltd.
    *** Aeronautics Major, College of Engineering, Korea Aerospace University

  • 3D 프린팅 PEEK/MWNTs 두께 변화형 허니컴 코어 광대역 전파 흡수 샌드위치 복합재 구조의 설계 및 제작
  • 강승현* · 심재원* · 최현준* · 유종경** · 권오범** · 황민제** · 남영우*,***†

  • This article is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

In this study, a 3D-printed thickness-gradient honeycomb core sandwich radar-absorbing composite structure was designed and fabricated, and its electromagnetic absorption performance and mechanical properties were evaluated. The core material consisted of PEEK uniformly dispersed with multi-walled carbon nanotubes (MWNTs) to provide dielectric loss. Based on the measured electromagnetic properties, the thickness-gradient honeycomb core was designed for broadband absorption, and free-space measurements confirmed a reflection loss below −10 dB over the 4−18 GHz frequency range. Mechanical tests indicated that annealing and MWNTs incorporation improved the strength and stiffness of the PEEK-based composites. These results demonstrate the potential of the proposed structure as a lightweight radar-absorbing sandwich composite for aerospace applications.


본 연구에서는 PEEK (Poly-Ether-Ether-Ketone)에 다중벽 탄소나노튜브(MWNTs)를 분산시켜 유전 손실 특성을 부여한 필라멘트를 제조하고, 이를 이용한 3D 프린팅 기반 두께 구배형 허니컴 코어 샌드위치 복합재 전파흡수구조를 설계하고 제작하였다. 측정된 전자기 물성을 기반으로 광대역 전파흡수 특성을 갖도록 구조를 설계하였으며, 제작된 시편에 대한 자유공간 측정 결과 4−18 GHz 범위에서 −10 dB 이하의 반사손실을 나타내어 우수한 광대역 전파흡수 성능을 확인하였다. 또한, 기계적 물성 평가 결과 열처리와 MWNTs 첨가는 PEEK 복합재의 강도와 강성을 향상시키는 것으로 나타났다. 본 연구를 통해 제안된 구조의 광대역 전파흡수 성능을 확인하였으며, PEEK/MWNTs 구성 소재의 기계적 물성 평가를 통해 경량 샌드위치 복합재 전파흡수구조로서의 적용 가능성을 제시하였다.


Keywords: 적층 제조(Additive manufacturing), 전파흡수구조(Radar absorbing structure), 허니컴 코어(Honeycomb core), 열가소성 수지(Thermoplastic resin), 나노 복합재료(Nanomaterial composites)

This Article

Correspondence to

  • Young-Woo Nam
  • * Graduate School of Aerospace and Mechanical Engineering, Korea Aerospace University
    *** Aeronautics Major, College of Engineering, Korea Aerospace University

  • E-mail: ywnam@kau.ac.kr